Fault diagnosis of rolling bearings based on Marginal Fisher analysis
The DOI matches its Crossref record; 33 of the 35 references it cites were found in a registry or an index.
Abstract
Feature extraction plays an important role in fault diagnosis. It is critical to extract the representative features for improving the classification performance. An intelligent fault diagnosis method based on Marginal Fisher analysis (MFA) is put forward and applied to rolling bearings. The high-dimensional features in time-domain, frequency-domain and wavelet-domain are extracted from the raw vibration signals to obtain rich faulty information. Subsequently, MFA excavates the underlying low-dimensional fault characteristics embedded in the high-dimensional feature space by preserving local manifold structure. Thus, the optimal low-dimensional features are obtained to characterize the various fault conditions of rolling bearings and finally fed into the simplest k-nearest neighbor classifier to recognize different fault categories. The diagnosis results validate the feasibility and effectiveness of the proposed fault diagnosis method, compared with the other three similar approaches.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The kNN has been concerned in the research of IFD, especially for fault diagnosis of rolling element bearings [266][267][268][269][270][271][272][273], gears [274][275][276][277], and motors [278].”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [268]
Citations
Cites
Nonlinear Dimensionality Reduction by Locally Linear Embedding
Roweis, S. T., & Saul, L. K. (2000) · Science · doi:10.1126/science.290.5500.2323 · Cited by 14,965 · cited 1×
“Since three papers (Roweis and Saul, 2000; Seung and Lee, 2000; Tenenbaum et al., 2000) of manifold learning were published in Science, an entirely new geometrically motivated approach appeared to deal with high-dimensional nonlinear data.”
BackgroundA Global Geometric Framework for Nonlinear Dimensionality Reduction
Tenenbaum, J. B., Silva, V. D., & Langford, J. C. (2000) · Science · doi:10.1126/science.290.5500.2319 · Cited by 13,585 · cited 1×
“Since three papers (Roweis and Saul, 2000; Seung and Lee, 2000; Tenenbaum et al., 2000) of manifold learning were published in Science, an entirely new geometrically motivated approach appeared to deal with high-dimensional nonlinear data.”
BackgroundIntroduction to Statistical Pattern Recognition
(1990) · Elsevier eBooks · doi:10.1016/c2009-0-27872-x · Cited by 11,031
Goodall, C. (1988) · Technometrics · doi:10.1080/00401706.1988.10488412 · Cited by 8,675
Jolliffe, I. T. (1986) · Springer Series in Statistics · doi:10.1007/978-1-4757-1904-8 · Cited by 8,273
Locality Preserving Projections
He, X., & Niyogi, P. (2003) · Cited by 4,119
Face recognition using Laplacianfaces
He, X., Yan, S., Hu, Y., Niyogi, P., & Zhang, H.-J. (2005) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2005.55 · Cited by 3,264 · cited 2×
“, 2005), face recognition (He et al., 2005), handwritten digit recognition (Weinberger and Saul, 2006) and so on.”
BackgroundGraph Embedding and Extensions: A General Framework for Dimensionality Reduction
Yan, S., Xu, D., Zhang, B., Zhang, H.-J., Yang, Q., & Lin, S. (2007) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2007.250598 · Cited by 3,031
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744 · cited 1×
“The root cause of faults in rotating machinery is often defective rolling bearings (Tse et al., 2001; Loparo and Lou, 2004; Qiu et al., 2005; Yang et al., 2005; Randall and Antoni, 2011; Slavic et al., 2011).”
BackgroundQiu, H., Lee, J., Lin, J., & Yu, G. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2005.03.007 · Cited by 1,477 · cited 1×
“The root cause of faults in rotating machinery is often defective rolling bearings (Tse et al., 2001; Loparo and Lou, 2004; Qiu et al., 2005; Yang et al., 2005; Randall and Antoni, 2011; Slavic et al., 2011).”
Background
Research works printed but not linked: 3
- Grady L, 2005, Proceedings of the Fifth Iasted International Conference on Visualization, Imaging, and Image Processing, 423
- He XF, 2003, Proceedings of the Conference on Advances in Neural Information Processing Systems, 1
- Loparo KA, 2012, Bearings vibration data set
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
A Survey on Fault Diagnosis of Rolling Bearings
Peng, B., Bi, Y., Xue, B., Zhang, M., & Wan, S. (2022) · Algorithms · doi:10.3390/a15100347 · Cited by 170
FaultNet: A Deep Convolutional Neural Network for Bearing Fault Classification
Magar, R., Ghule, L., Li, J., Zhao, Y. S., & Farimani, A. B. (2021) · IEEE Access · doi:10.1109/access.2021.3056944 · Cited by 129
“With bearing failure being one of the major contributors to the downtime of industrial machines, it is very important to address this problem with high reliability and reduce the break-down of machines [6]–[8].”
BackgroundJiang, Y. S., Zhu, H., & Li, Z. (2015) · Chaos Solitons & Fractals · doi:10.1016/j.chaos.2015.09.007 · Cited by 114
Amin, A. A., Iqbal, M. S., & Shahbaz, M. H. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.121956 · Cited by 118
Metadata
- Authors
- Jiang, L., Shi, T., & Xuan, J.
- Affiliations
- State Key Laboratory of Digital Manufacturing Equipment and Technology (CN)
- Corresponding author
- Shi, Tielin
- Venue
- Journal of Vibration and Control
- Publisher
- SAGE Publications
- Published
- 2012-11-05
- Volume
- 20
- Issue
- 3
- Pages
- 470-480
- ISSN
- 1077-5463 (ISSN-L)
- 1741-2986
- OpenAlex
- W2042559813
- Semantic Scholar
- 1ad54652974fdef6aa8b7cebc237545332021bee
- Cited by
- 30
- References
- 35
- Citations by year
- 2025: 2 · 2024: 2 · 2023: 1 · 2022: 3 · 2021: 1 · 2020: 3 · 2019: 3 · 2018: 3 · 2017: 3 · 2016: 5 · 2015: 2 · 2014: 1 · 2013: 1
- FWCI
- 1.86
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Journal of Vibration and Control (publishedVersion)
- Funders
- Case Western Reserve University
- National Natural Science Foundation of China
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- rolling bearing fault diagnosis, marginal Fisher analysis, feature extraction, vibration signals, manifold learning, low-dimensional feature representation, k-nearest neighbors, wavelet features, frequency-domain features, time-domain features
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fault diagnosis of rolling bearings based on Marginal Fisher analysis. https://app.cochat.ai/papers/10.1177/1077546312463747
- The paper
- Jiang, L., Shi, T., & Xuan, J. (2014). Fault diagnosis of rolling bearings based on Marginal Fisher analysis. Journal of Vibration and Control. https://doi.org/10.1177/1077546312463747
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.