The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Thin Plates and Shells: Theory, Analysis, and Applications
Open accessAbstract
7R28. Thin Plates and Shells: Theory, Analysis, and Applications. - E Ventsel (Eng Sci and Mech Dept, Penn State, Univ Park PA 16802) and T Krauthammer (Protective Tech Center, Penn State, Univ Park PA 16802). Marcel Dekker, New York. 2001. 666 pp. ISBN 0-8247-0575-0. $175.00. Reviewed by E Carrera (Dept of Aerospace Eng, Politecnico di Torino, Corso Duca Degli Abruzzi 24, Torino, 10129, Italy).“Thin plates,” “thin shells,” and “thin plates and shells” are classical subjects for books. Eminent scientists, such as Vlasov, Flu¨gge, Novozhilov, Timoschenko, Washizu, Kraus, Gold’enveizer, Cicala, Librescu, Donnell, Vekua, and Leissa among others, have written milestone books on the topic. All of these books are, with no doubt, excellent sources for the analysis of two-dimensional structures. Most of these classical books have appeared in the middle of the last century and, in the same case each book states the point of view of each scientist on plate and shell theories. A few books on plates and shells are known which have been published in the recent past. Among these the book by Ventsel and Krauthammer is one of the most useful and exhaustive. It includes both plate and shell geometries as well as theories and solutions of practical problems. Ventsel and Krauthammer present several topics in a manner which results in a brilliant selection of different possible ways to see plates and shells as they are known by the classical books mentioned above. This book is a good synthesis of West and East Schools of knowledge on plates and shells. It is clearly written, self complete, and rich with examples as well as of applications to practical problems. The authors have shown their own ability in writing a book on plates and shells avoiding vectorial or tensorial notations which could introduce difficulties to beginners. The editorial form is quite well done: figures, plots, formulas, and texts are very well balanced in each chapter and on each page. The book has been divided in two parts which deal with thin plates and thin shells, respectively. Each part quotes introduction, fundamentals, membrane and bending response, buckling, and vibrations. A brief description of the book’s layout is given below. Part I is first considered. Chapter 1 offers a very interesting historical note on plates theories. Fundamentals of elasticity relations are recalled in a Cartesian reference system. Kirchhoff’s thin plate theory has been described in Chapter 2; governing equations are derived by using both elasticity relations and variational statements. Bending of rectangular plates are treated in Chapter 3; a large variety of practical problems have been solved by considering different geometries, boundary conditions and applied loadings. Chapter 4 has been devoted to circular plates. Polar coordinates have been preferred in this case. Other geometries, such as elliptical and triangular plates have been solved in Chapter 5. Approximated solution methods and their applications are discussed in Chapter 6 in which Finite Difference, Finite Element, and Boundary Element Methods are introduced and applied to two-dimensional flat structures. Advanced topics are addressed in Chapter 7; thermoelastic problems, stiffened plates, orthotropic behavior, refined theories accounting for transverse shear deformation effects, geometrically nonlinear behavior, layered, and sandwich plates are considered. Buckling of plates has been considered in Chapter 8; introductory concepts are first introduced, buckling of rectangular and circular plates are then solved by application of equilibrium and energy methods. Results are also given for stiffened, orthotropic, and sandwich plates. Large deflection and post-buckling response have also been treated in this chapter. Dynamic problems are considered in Chapter 9. Thin shells theory and analysis begin with Chapter 10. This chapter introduces shell structure and makes an historical note on main shell theory contributions and developments. Concepts related to differential geometry of surfaces are given in Chapter 11. First and second fundamental forms are derived and particularized to several geometrical shell configurations (shell of revolution, cylindrical, and conical). Linear elasticity relations in curvilinear coordinates and in the framework of Kirchhoff-Love postulates are presented in Chapter 12. Membrane shell theories and applications are considered in Chapters 13 and 14, respectively. Methods, solution techniques, and results are presented for a large variety of problems, such as roof shell structures, liquid storage facilities, and pressurized vessels. So called moment theory has been addressed in Chapter 15 for circular cylindrical cases. The asymptotic integration method has been used to solve the differential equations of cylindrical shell subjected to general loadings. Solutions of particular cases are presented in the same chapter. Extension to shells of revolution is given in Chapter 16. Other
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zienkiewicz, O. C. (1989) · Cited by 14,802
Timoshenko, S. P., & Woinowsky-Krieger, S. (1959) · UCLA Biblioteca de Ingenieria Civil · Cited by 12,112
Brebbia, C. A., Telles, J. C. F., & Wrobel, L. C. (1984) · Springer eBooks · doi:10.1007/978-3-642-48860-3 · Cited by 3,151
Boley, B. A., Weiner, J. H., & Dill, E. H. (1961) · Physics Today · doi:10.1063/1.3057466 · Cited by 2,266
Variational Methods in Elasticity and Plasticity
WASHIZU, K. (1982) · Cited by 2,092
The Method of Weighted Residuals and Variational Principles
Finlayson, B. A. (2013) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9781611973242 · Cited by 1,945
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,759
Approximate Methods of Higher Analysis
Kantorovich, L. V., Krylov, V. I., Benster, C. D., & Weiss, G. (1960) · Physics Today · doi:10.1063/1.3056800 · Cited by 1,458
The American society of mechanical engineers
(1902) · Journal of the Franklin Institute · doi:10.1016/s0016-0032(02)90132-8 · Cited by 945
Roach, G. F. (1982) · Medical Entomology and Zoology · Cited by 296
Cited by
Recent development in 2D materials beyond graphene
Gupta, A., Sakthivel, T., & Seal, S. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.02.002 · Cited by 1,558
A soft, wearable microfluidic device for the capture, storage, and colorimetric sensing of sweat
Koh, A., Kang, D., Xue, Y., Lee, S., Pielak, R. M., Kim, J., Hwang, T., Min, S., Banks, A., Bastien, P., et al. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aaf2593 · Cited by 1,308
Dark acoustic metamaterials as super absorbers for low-frequency sound
Mei, J., Ma, G., Yang, M., Yang, Z., Wen, W., & Sheng, P. (2012) · Nature Communications · doi:10.1038/ncomms1758 · Cited by 1,149
A Deep Collocation Method for the Bending Analysis of Kirchhoff Plate
Guo, H., Zhuang, X., & Rabczuk, T. (2019) · Computers, Materials & Continua · doi:10.32604/cmc.2019.06660 · Cited by 466
Zhuang, X., Guo, H., Alajlan, N., Zhu, H., & Rabczuk, T. (2021) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2021.104225 · Cited by 430
Metadata
- Authors
- Ventsel, Krauthammer, & Carrera
- Venue
- Applied Mechanics Reviews
- Publisher
- ASME International
- Published
- 2002-07-01
- Volume
- 55
- Issue
- 4
- Pages
- B72-B73
- ISSN
- 0003-6900 (ISSN-L)
- 2379-0407
- OpenAlex
- W1998564308
- Cited by
- 1,011
- References
- 10
- FWCI
- 3.35
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thin Plates and Shells: Theory, Analysis, and Applications. https://app.cochat.ai/papers/10.1115/1.1483356
- The paper
- Ventsel, Krauthammer, & Carrera. (2002). Thin Plates and Shells: Theory, Analysis, and Applications. Applied Mechanics Reviews. https://doi.org/10.1115/1.1483356
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.