The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Friction modeling for dynamic system simulation
Open accessAbstract
Friction is a very complicated phenomenon arising at the contact of surfaces. Experiments indicate a functional dependence upon a large variety of parameters, including sliding speed, acceleration, critical sliding distance, temperature, normal load, humidity, surface preparation, and, of course, material combination. In many engineering applications, the success of models in predicting experimental results remains strongly sensitive to the friction model. Furthermore, a broad cross section of engineering and science disciplines have developed interesting ways of representing friction, with models originating from the fundamental mechanics areas, the system dynamics and controls fields, as well as many others. A fundamental unresolved question in system simulation remains: what is the most appropriate way to include friction in an analytical or numerical model, and what are the implications of friction model choice? This review article draws upon the vast body of literature from many diverse engineering fields and critically examines the use of various friction models under different circumstances. Special focus is given to specific topics: lumped-parameter system models (usually of low order)—use of various types of parameter dependence of friction; continuum system models—continuous interface models and their discretization; self-excited system response—steady-sliding stability, stick/slip, and friction model requirements; and forced system response—stick/slip, partial slip, and friction model requirements. The conclusion from this broad survey is that the system model and friction model are fundamentally coupled, and they cannot be chosen independently. Furthermore, the usefulness of friction model and the success of the system dynamic model rely strongly on each other. Across disciplines, it is clear that multi-scale effects can dominate performance of friction contacts, and as a result more research is needed into computational tools and approaches capable of resolving the diverse length scales present in many practical problems. There are 196 references cited in this review-article.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface energy and the contact of elastic solids
Johnson, K. L., Kendall, K., & Roberts, A. D. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0141 · Cited by 8,061
Johnson, K. L. (1985) · Cambridge University Press eBooks · doi:10.1017/cbo9781139171731 · Cited by 7,796
Contact of nominally flat surfaces
Greenwood, J. A., & Williamson, J. B. P. (1966) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1966.0242 · Cited by 5,692
A new model for control of systems with friction
Canudas de Wit, C., Olsson, H., Astrom, K. J., & Lischinsky, P. (1995) · IEEE Transactions on Automatic Control · doi:10.1109/9.376053 · Cited by 3,685
Introduction to perturbation techniques
Nayfeh, A. H. (1981) · Cited by 3,628
Slip instability and state variable friction laws
Ruina, A. (1983) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb088ib12p10359 · Cited by 3,280
Modeling of rock friction: 1. Experimental results and constitutive equations
Dieterich, J. H. (1979) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb084ib05p02161 · Cited by 3,049
Elastic Spheres in Contact Under Varying Oblique Forces
Mindlin, R. D., & Deresiewicz, H. (1953) · Journal of Applied Mechanics · doi:10.1115/1.4010702 · Cited by 2,782
Armstrong-Hélouvry, B., Dupont, P., & De Wit, C. C. (1994) · Automatica · doi:10.1016/0005-1098(94)90209-7 · Cited by 2,678
Atomic-scale friction of a tungsten tip on a graphite surface
Mate, C. M., McClelland, G. M., Erlandsson, R., & Chiang, S. (1987) · Physical Review Letters · doi:10.1103/physrevlett.59.1942 · Cited by 1,763
Cited by
Influence of Dry Friction on the Dynamics of Cantilevered Pipes Conveying Fluid
Guo, Z., Ni, Q., Wang, L., Zhou, K., & Meng, X. (2022) · Applied Sciences · doi:10.3390/app12020724 · Cited by 5
Metadata
- Authors
- Berger, E.
- Venue
- Applied Mechanics Reviews
- Publisher
- ASME International
- Published
- 2002-10-16
- Volume
- 55
- Issue
- 6
- Pages
- 535-577
- ISSN
- 0003-6900 (ISSN-L)
- 2379-0407
- OpenAlex
- W2001910813
- Cited by
- 426
- References
- 38
- FWCI
- 6.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Friction modeling for dynamic system simulation. https://app.cochat.ai/papers/10.1115/1.1501080
- The paper
- Berger, E. (2002). Friction modeling for dynamic system simulation. Applied Mechanics Reviews. https://doi.org/10.1115/1.1501080
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.