The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Experimental Model of Temperature-Driven Nanofluid
Abstract
This paper presents a systematic experimental method of studying the heat transfer behavior of buoyancy-driven nanofluids. The presence of nanoparticles in buoyancy-driven flows affects the thermophysical properties of the fluid and consequently alters the rate of heat transfer. The focus of this paper is to estimate the range of volume fractions that results in maximum thermal enhancement and the impact of volume fraction on Nusselt number. The test cell for the nanofluid is a two-dimensional rectangular enclosure with differentially heated vertical walls and adiabatic horizontal walls filled with 27 nm Al2O3–H2O nanofluid. Simulations were performed to measure the transient and steady-state thermal response of nanofluid to imposed isothermal condition. The volume fraction is varied between 0% and 8%. It is observed that the trend of the temporal and spatial evolution of temperature profile for the nanofluid mimics that of the carrier fluid. Hence, the behaviors of both fluids are similar. Results shows that for small volume fraction, 0.2⩽ϕ⩽2% the presence of the nanoparticles does not impede the free convective heat transfer, rather it augments the rate of heat transfer. However, for large volume fraction ϕ>2%, the convective heat transfer coefficient declines due to reduction in the Rayleigh number caused by increase in kinematic viscosity. Also, an empirical correlation for Nuϕ as a function of ϕ and Ra has been developed, and it is observed that the nanoparticle enhances heat transfer rate even at a small volume fraction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Conductivity of Heterogeneous Two-Component Systems
Hamilton, R. L., & Crosser, O. K. (1962) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160003a005 · Cited by 3,672
Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids
Khanafer, K., Vafai, K., & Lightstone, M. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00156-x · Cited by 2,975
Cited by
Ho, C. J., Liu, W. K., Chang, Y. S., & Lin, C. C. (2010) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2010.02.013 · Cited by 816
Nanofluids: From Vision to Reality Through Research
Choi, S. U. S. (2009) · Journal of Heat Transfer · doi:10.1115/1.3056479 · Cited by 684
Measurement of the specific heat capacity of water-based Al2O3 nanofluid
Zhou, S.-Q., & Ni, R. (2008) · Applied Physics Letters · doi:10.1063/1.2890431 · Cited by 632
Natural convection cooling of a localised heat source at the bottom of a nanofluid-filled enclosure
Aminossadati, S. M., & Ghasemi, B. (2009) · European Journal of Mechanics - B/Fluids · doi:10.1016/j.euromechflu.2009.05.006 · Cited by 485
Numerical study of convective heat transfer of nanofluids: A review
Vanaki, S. M., Ganesan, P., & Mohammed, H. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.042 · Cited by 277
Metadata
- Authors
- Nnanna, A. G. A.
- Venue
- Journal of Heat Transfer
- Publisher
- ASME International
- Published
- 2006-09-12
- Volume
- 129
- Issue
- 6
- Pages
- 697-704
- ISSN
- 0022-1481 (ISSN-L)
- 1528-8943
- OpenAlex
- W2032006266
- Cited by
- 225
- References
- 2
- FWCI
- 3.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Experimental Model of Temperature-Driven Nanofluid. https://app.cochat.ai/papers/10.1115/1.2717239
- The paper
- Nnanna, A. G. A. (2007). Experimental Model of Temperature-Driven Nanofluid. Journal of Heat Transfer. https://doi.org/10.1115/1.2717239
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.