CoChat

A New Approach to the Challenge of Machinery Prognostics

Hansen, R. J., Hall, D. L., Kurtz, S. K. · 1995 · Journal of Engineering for Gas Turbines and Power
Cited by 61

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Current generation mechanical diagnostic equipment is designed to identify individual events or trends in the output of sensors mounted on a mechanical component, subsystem, or system. Such equipment can provide a useful indication that a failure condition may be developing, but it cannot provide reliable predictions of the remaining safe or operational life. Typically, these diagnostic systems simply compare the output of individual sensors against a priori thresholds to establish a measure of the system’s health. Two problems result from this approach: (1) There is no advantage taken of possible synergy among the sensors, i.e., the determination of health is one dimensional; and (2) the diagnosis provides only a statement regarding the current equipment health, but does not provide a prediction of the time remaining to failure. This often leads to an operational environment in which diagnostic equipment outputs are either ignored because of frequent false alarms or frequent (and costly) time-based preventive maintenance is performed to avoid hazardous failures. This paper describes a new approach to the development of a more robust diagnosis and prognostic capability. It is based on the fusion of sensor-based and model-based information. Sensor-based information is the essence of current diagnostic systems. Model-based information combines dynamic models of individual mechanical components with micromechanical models of relevant failure mechanisms, such as fracture and crack propagation. These micromechanical models must account for initial flaw size distribution and other microstructural parameters describing initial components condition. A specific application of this approach is addressed, the diagnosis of mechanical failure in meshing gears. Four specific issues are considered: (a) how to couple a validated numerical simulation of gear transmission error (due to tooth spacing irregularity, contour irregularity, or material inhomogeneity) with physically and empirically based descriptions of fatigue crack growth to predict a failure precursor signature at the component level; (b) how to predict the manifestation of this signature at the subsystem or system level where sensors are located; (c) how to fuse this model-based information with the corresponding sensor-based information to predict remaining safe or operational life of a gear; and (d) issues associated with extending this methodology to bearings and other rotating machinery components.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1115/1.2814097

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Hansen, R. J., Hall, D. L., & Kurtz, S. K.
Venue
Journal of Engineering for Gas Turbines and Power
Published
1995-04-01
Volume
117
Issue
2
Pages
320-325
ISSN
  • 0742-4795 (ISSN-L)
  • 1528-8919
OpenAlex
W2043059407
Cited by
61
References
1
FWCI
5.74
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.