The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Active and Semi-Active Vibration Isolation
Abstract
In the five decades since the founding of the ASME Design Engineering Division, the important problem of vibration isolation has been attacked first through the design of passive spring-damper suspensions and later by the use of active and semi-active elements. This paper reviews the historical development of theoretical concepts necessary for the design of isolation systems and indicates how control theory began to influence vibration isolation in the last half of this period. Practical active and semi-active suspensions have only recently become possible with the advent of powerful but relatively inexpensive signal processors. To illustrate these developments for engineers who have not been intimately involved with active systems, only simple vibrational system models will be discussed, although some modern hardware will be shown which is now being applied to complex systems. Instead of attempting to review the many theoretical concepts which have been proposed for active systems, this article will focus on a relatively simple idea with which the author has been associated over the past thirty years; namely the “skyhook” damper. This idea came through purely theoretical studies but is now used in combination with other concepts in production suspension systems. Two quite different application areas will be discussed. The first involves stable platforms to provide extreme isolation for delicate manufacturing operations against seismic inputs and the second involves automotive suspensions. Although similar concepts are found in these two application areas, the widely varying requirements result in very different suspension hardware. The special case of the semi-active damper, which requires very little control power and is presently reaching production, will also be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Treatise on the Analytical Dynamics of Particles and Rigid Bodies
Whittaker, E. T., & McCrae, S. W. (1988) · Cambridge University Press eBooks · doi:10.1017/cbo9780511608797 · Cited by 2,540
Vibration Control Using Semi-Active Force Generators
KARNOPP, D. C., Crosby, M. J., & Harwood, R. A. (1974) · Journal of Engineering for Industry · doi:10.1115/1.3438373 · Cited by 1,365
Self-citationRandom Vibration in Mechanical Systems
(1963) · Elsevier eBooks · doi:10.1016/c2013-0-12506-8 · Cited by 899
Design Principles for Vibration Control Systems Using Semi-Active Dampers
KARNOPP, D. C. (1990) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.2896163 · Cited by 146
Self-citationPractical product implementation of an active/passive vibration isolation system
Beard, A. M., Schubert, D. W., & von Flotow, A. H. (1994) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.188877 · Cited by 45
Cited by
Vibration energy harvesting in automotive suspension system: A detailed review
Abdelkareem, M. A. A., Xu, L., Ali, M. K. A., Elagouz, A., Mi, J., Guo, S., Liu, Y., & Zuo, L. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.08.030 · Cited by 441
Yang, T., Zhou, S., Fang, S., Qin, W., & Inman, D. J. (2021) · Applied Physics Reviews · doi:10.1063/5.0051432 · Cited by 259
Tuned vibration absorber for suppression of rest tremor in Parkinson’s disease
Hashemi, S. M., Golnaraghi, M. F., & Patla, A. E. (2004) · Medical & Biological Engineering & Computing · doi:10.1007/bf02351012 · Cited by 68
Metadata
- Authors
- Karnopp, D.
- Venue
- Journal of Vibration and Acoustics
- Publisher
- ASME International
- Published
- 1995-06-01
- Volume
- 117
- Issue
- B
- Pages
- 177-185
- ISSN
- 0739-3717 (ISSN-L)
- 1048-9002
- 1528-8927
- OpenAlex
- W2033210740
- Cited by
- 268
- References
- 5
- FWCI
- 9.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Active and Semi-Active Vibration Isolation. https://app.cochat.ai/papers/10.1115/1.2838660
- The paper
- Karnopp, D. (1995). Active and Semi-Active Vibration Isolation. Journal of Vibration and Acoustics. https://doi.org/10.1115/1.2838660
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.