Correction Factor Formula to Predict the Central and Minimum Film Thickness for Shear-Thinning Fluids in EHL
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Using a coarse-grained molecular dynamics simulation based on the bead-spring polymer model, we reproduced the film distribution of molecularly thin lubricant films with polar end groups coated on the disk surface and quantified the film-surface morphology using a molecular-probe scanning method. We found that the film-surface morphology changed periodically with increasing film thickness. The monolayer of a polar lubricant that entirely covers the solid surface provides a flat lubricant surface by exposing its nonpolar backbone outside of the monolayer. By increasing film thickness, the end beads aggregate to make clusters, and bulges form on the lubricant surface, accompanying an increase in surface roughness. The bulges continue to grow even though the averaged film thickness reaches or exceeds the bilayer thickness. With further increases in film thickness, the clusters start to be uniformly distributed in the lateral direction to clearly form a third layer. As for the formation of fourth and fifth layers, the process is basically the same as that for the second and third layers. Through our calculations of the intermolecular potential field and the intermolecular force field, these values are found to change periodically and are synchronized with the formation of molecule aggregations, which explains the mechanism of forming the layered structure that is inherent to a polar lubricant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A numerical solution to the elasto-hydrodynamic problem
Dowson, D., & Higginson, G. R. (1959) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1959_001_004_02 · Cited by 663
Cited by
Marian, M., Bartz, M., Wartzack, S., & Rosenkranz, A. (2020) · Lubricants · doi:10.3390/lubricants8100095 · Cited by 92
Predicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
Rheology and high-pressure models for quantitative elastohydrodynamics
Bair, S. (2009) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet506 · Cited by 47
Self-citationWolf, M., Solovyev, S., & Arshia, F. (2022) · Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · doi:10.1177/13506501211047756 · Cited by 6
Traction in EHL-Contacts : the influence of local fluid rheology and temperatures
Bader, N. F. (2018) · Hannover : Institutionelles Repositorium der Leibniz Universität Hannover · doi:10.15488/4459 · Cited by 6
Metadata
- Authors
- Jang, J. Y., Khonsari, M. M., & Bair, S.
- Venue
- Journal of Tribology
- Publisher
- ASME International
- Published
- 2008-03-05
- Volume
- 130
- Issue
- 2
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W2047879742
- Cited by
- 29
- References
- 1
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.