The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Film thickness in elastohydrodynamically lubricated slender elliptic contacts: Part I – numerical studies of central film thickness
Abstract
In this paper, analytical equations for the central film thickness in slender elliptic contacts are investigated. A comparison of state-of-the-art formulas with simulation results of a multilevel elastohydrodynamic lubrication solver is conducted and shows considerable deviation. Therefore, a new film thickness formula for slender elliptic contacts with variable ellipticity is derived. It incorporates asymptotic solutions, which results in validity over a large parameter domain. It captures the behaviour of increasing film thickness with increasing load for specific very slender contacts. The new formula proves to be significantly more accurate than current equations. Experimental studies and discussions on minimum film thickness will be presented in a subsequent publication.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, the implementation of these equations requires the definition of more complicated analytical expressions to fit the simulation results, which, in turn, increases the computational effort and the proneness to errors.”
From Predicting EHL film thickness parameters by machine learning approaches (2023) · cites this paper as [21]
Citations
Cites
Fundamentals of Fluid Film Lubrication
Hamrock, B. J., Schmid, S. R., & Jacobson, B. O. (2004) · CRC Press eBooks · doi:10.1201/9780203021187 · Cited by 2,060
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results
Hamrock, B. J., & Dowson, D. (1977) · Journal of Lubrication Technology · doi:10.1115/1.3453074 · Cited by 1,183
Elasto-hydrodynamic lubrication : the fundamentals of roller and gear lubrication
Dowson, D., & Higginson, G. R. (1966) · Pergamon Press eBooks · Cited by 573
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical Formulation
Hamrock, B. J., & Dowson, D. (1976) · Journal of Lubrication Technology · doi:10.1115/1.3452801 · Cited by 464
Multilevel Methods in Lubrication
(2000) · Tribology Series · doi:10.1016/s0167-8922(00)x8001-7 · Cited by 368
Hamrock, B. J., & Dowson, D. (1978) · Journal of Lubrication Technology · doi:10.1115/1.3453152 · Cited by 307
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation Results
Hamrock, B. J., & Dowson, D. (1977) · Journal of Lubrication Technology · doi:10.1115/1.3452973 · Cited by 269
A Review of Elasto-Hydrodynamic Lubrication Theory
Lugt, P. M., & Morales-Espejel, G. E. (2011) · Tribology Transactions · doi:10.1080/10402004.2010.551804 · Cited by 260
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II—Ellipticity Parameter Results
Hamrock, B. J., & Dowson, D. (1976) · Journal of Lubrication Technology · doi:10.1115/1.3452861 · Cited by 234
Chittenden, R. J., Dowson, D., Dunn, J. F., & Taylor, C. M. (1985) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1985.0014 · Cited by 230
Research works printed but not linked: 9
- Dowson D, 1961, Engineering, 192, 158
- Dowson D, Toyoda S. A central film thickness formula for elastohydrodynamic line contacts. In: Proceedings of the Fifth Leeds-Lyon Symposium on Tribology , Leeds, 1978, pp.60–64.
- Zhu D, 2011, J Tribol, 10, 133
- Moes H, 2000, Lubrication and Beyond
- Otero JE, 2017, Adv Mech Eng, 9, 1
- Venner CH, 2000, Multi-level methods in lubrication
- Blok H. Inverse problems in hydrodynamic lubrication and design directives for lubricated flexible surfaces. In: Proceeedings of international symposium lubrication and wear , Houston, 1963, 7, Available from: https://ci.nii.ac.jp/naid/10026701153/en/.
- Dowson D, 1966, Elastohydrodynamic lubrication, the fundamentals of roller and gear lubrication
- Grubin A, 1949, Invest Contact Mach Compon, 2, 115
Cited by
Predicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
Metadata
- Authors
- Wolf, M., Solovyev, S., & Arshia, F.
- Affiliations
- Robert Bosch (Germany) (DE)
- Robert-Bosch-GmbH, Germany
- Corresponding author
- Wolf, Marius
- ORCID
- Wolf, Marius
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Publisher
- SAGE Publications
- Published
- 2021-10-06
- Volume
- 236
- Issue
- 6
- Pages
- 1043-1055
- ISSN
- 1350-6501 (ISSN-L)
- 2041-305X
- OpenAlex
- W3203663924
- Cited by
- 6
- References
- 42
- Citations by year
- 2025: 1 · 2023: 1 · 2022: 4
- FWCI
- 0.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- elastohydrodynamic lubrication, film thickness, asymptotic solutions
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Film thickness in elastohydrodynamically lubricated slender elliptic contacts: Part I – numerical studies of central film thickness. https://app.cochat.ai/papers/10.1177/13506501211047756
- The paper
- Wolf, M., Solovyev, S., & Arshia, F. (2022). Film thickness in elastohydrodynamically lubricated slender elliptic contacts: Part I – numerical studies of central film thickness. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/13506501211047756
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.