An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting
The DOI matches its Crossref record.
Abstract
An analytical model for prediction of tool temperature fields in metal cutting processes is developed. The model can be applied to any continuous or interrupted three-dimensional cutting process. To accurately represent the heating and cooling cycles encountered during interrupted cutting, the analysis predicts time dependent heat fluxes into the cutting tool. A time history of this heat flux is obtained by performing an energy balance on the chip formation zone. The variation with time of the tool temperature fields is determined from a heat transfer analysis with prescribed heat generation rate. The analysis requires the cutting forces as inputs. The model tool-chip interface temperatures agree well with the experimental tests reported in the literature, for all cutting conditions and work materials investigated. The results indicate that the tool-chip interface temperature increases with cutting speed during both continuous and interrupted cutting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Still being checked.
Cited by
Abukhshim, N. A., Mativenga, P. T., & Sheikh, M. A. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.07.024 · Cited by 707
Sensor signals for tool-wear monitoring in metal cutting operations—a review of methods
Dimla, D. E. (2000) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(99)00122-4 · Cited by 696
Wang, B., Liu, Z., Cai, Y., Luo, X., Ma, H., Song, Q., & Xiong, Z. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103744 · Cited by 322
Prediction of tool and chip temperature in continuous and interrupted machining
Lazoglu, I., & Altintas, Y. (2002) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00039-1 · Cited by 219
Carvalho, S., Silva, S. M. M. D. L. E., Machado, Á. R., & Guimarães, G. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.03.086 · Cited by 106
Metadata
- Authors
- Radulescu, R., & Kapoor, S. G.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- ORCID
- Kapoor, S. G.
- Venue
- Journal of Engineering for Industry
- Publisher
- ASME International
- Published
- 1994-05-01
- Volume
- 116
- Issue
- 2
- Pages
- 135-143
- ISSN
- 0022-0817 (ISSN-L)
- OpenAlex
- W1990938419
- Cited by
- 92
- References
- 0
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 3 · 2023: 4 · 2022: 7 · 2021: 2 · 2020: 1 · 2019: 2 · 2018: 7 · 2017: 4 · 2016: 5 · 2015: 3 · 2014: 2 · 2013: 3 · 2012: 2
- FWCI
- 8.06
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Engineering for Industry (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
- Physical Sciences › Engineering › Computational Mechanics › Advanced Numerical Analysis Techniques
- Keywords
- interrupted cutting, continuous cutting, metal cutting, tool-chip interface temperature, heat flux, energy balance, heat transfer analysis, cutting force, cutting speed, analytical model
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting. https://app.cochat.ai/papers/10.1115/1.2901923
- The paper
- Radulescu, R., & Kapoor, S. G. (1994). An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting. Journal of Engineering for Industry. https://doi.org/10.1115/1.2901923
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.