An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting
The DOI matches its Crossref record.
Abstract
An analytical model for prediction of tool temperature fields in metal cutting processes is developed. The model can be applied to any continuous or interrupted three-dimensional cutting process. To accurately represent the heating and cooling cycles encountered during interrupted cutting, the analysis predicts time dependent heat fluxes into the cutting tool. A time history of this heat flux is obtained by performing an energy balance on the chip formation zone. The variation with time of the tool temperature fields is determined from a heat transfer analysis with prescribed heat generation rate. The analysis requires the cutting forces as inputs. The model tool-chip interface temperatures agree well with the experimental tests reported in the literature, for all cutting conditions and work materials investigated. The results indicate that the tool-chip interface temperature increases with cutting speed during both continuous and interrupted cutting.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Still being checked.
Cited by
Abukhshim, N. A., Mativenga, P. T., & Sheikh, M. A. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.07.024 · Cited by 707
Sensor signals for tool-wear monitoring in metal cutting operations—a review of methods
Dimla, D. E. (2000) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(99)00122-4 · Cited by 696
Wang, B., Liu, Z., Cai, Y., Luo, X., Ma, H., Song, Q., & Xiong, Z. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103744 · Cited by 322
Prediction of tool and chip temperature in continuous and interrupted machining
Lazoglu, I., & Altintas, Y. (2002) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00039-1 · Cited by 219
Carvalho, S., Silva, S. M. M. D. L. E., Machado, Á. R., & Guimarães, G. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.03.086 · Cited by 114
Thermal analysis of micro milling titanium alloy Ti–6Al–4V
Mamedov, A., & Lazoğlu, İ. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.10.019 · Cited by 100
Finite element analysis of temperature rise in metal cutting processes
Majumdar, P., Jayaramachandran, R., & Ganesan, S. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.01.006 · Cited by 93
Temperature Variation in the Cutting Tool in End Milling
Sato, M., Tamura, N., & TANAKA, H. (2011) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4003615 · Cited by 91
Modeling and Measurement of Cutting Temperatures in Milling
Karagüzel, U., Bakkal, M., & Budak, E. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.03.182 · Cited by 91
Wanigarathne, P. C., Kardekar, A. D., Dillon, O. W., Poulachon, G., & Jawahir, I. S. (2005) · Wear · doi:10.1016/j.wear.2005.01.046 · Cited by 86
An inverse method to estimate the moving heat source in machining process
Luchesi, V. M., & Coelho, R. T. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.04.014 · Cited by 79
A numerical model to determine temperature distribution in orthogonal metal cutting
Doğu, Y., Aslan, E., & Çamuşcu, N. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.05.019 · Cited by 73
Theoretical modelling and simulation of cutting forces in face milling with cutter runout
Zheng, H. Q., Li, X. P., Wong, Y. S., & Nee, A. Y. C. (1999) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(99)00023-1 · Cited by 73
Cutting tool temperature prediction method using analytical model for end milling
Wu, B., Cui, D., He, X., Dinghua, Z., & Tang, K. (2016) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2016.03.011 · Cited by 70
Chiou, R. Y., Lu, L. N., Chen, J. S. J., & North, M. T. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-005-0266-8 · Cited by 67
Boundary element method analysis of temperature fields in coated cutting tools
Du, F., Lovell, M. R., & Wu, T. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(00)00291-2 · Cited by 66
Influence of thermal conductivity on wear when machining titanium alloys
Abdel-Aal, H. A., Nouari, M., & Mansori, M. E. (2008) · Tribology International · doi:10.1016/j.triboint.2008.07.005 · Cited by 62
Jiang, F., Liu, Z., Wan, Y., & Shi, Z. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.004 · Cited by 62
Wear of CBN tool in turning of silicon nitride with cryogenic cooling
Wang, Z. Y., & Rajurkar, K. P. (1997) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(96)00037-5 · Cited by 60
A review of research related to Salomon's hypothesis on cutting speeds and temperatures
Longbottom, J. M., & Lanham, J. D. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.12.001 · Cited by 58
Cutting Tool Temperatures in Contour Turning: Transient Analysis and Experimental Verification
Stephenson, D. A., Jen, T., & Lavine, A. S. (1997) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2831179 · Cited by 55
Karagüzel, U., & Budak, E. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.07.024 · Cited by 53
Abdel-Aal, H. A., Nouari, M., & Mansori, M. E. (2008) · Wear · doi:10.1016/j.wear.2008.04.023 · Cited by 51
A Three-Dimensional Transient Thermal Model for Machining
Islam, C., Lazoğlu, İ., & Altıntaş, Y. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4030305 · Cited by 44
Ning, J., & Liang, S. Y. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2020037 · Cited by 39
Cui, X., & Guo, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.048 · Cited by 34
An Approach to Theoretical Modeling and Simulation of Face Milling Forces
Li, X. P., Zheng, H. Q., Wong, Y. S., & Nee, A. Y. C. (2000) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(00)70024-7 · Cited by 33
A transient cutting temperature prediction model for high-speed ultrasonic vibration turning
Zhang, X., Peng, Z., & Liu, L. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.08.065 · Cited by 30
Determination of temperature distributions on the rake face of cutting tools using a remote method
Chen, W.-C., Tsao, C.-C., & Liang, P.-W. (1997) · International Communications in Heat and Mass Transfer · doi:10.1016/s0735-1933(97)00002-x · Cited by 28
Thermal effects in single point diamond turning: Analysis, modeling and experimental study
Kumar, J., Negi, V. S., Chattopadhyay, K. D., Sarepaka, R. V., & Sinha, R. K. (2017) · Measurement · doi:10.1016/j.measurement.2017.01.046 · Cited by 27
Ning, J., & Liang, S. Y. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040074 · Cited by 24
Tool Heat Transfer in Orthogonal Metal Cutting
Ostafiev, V. A., Kharkevich, A., Weinert, K., & Ostafiev, S. (1999) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2833043 · Cited by 23
Cutting tool temperatures in interrupted cutting—The effect of feed-direction modulation
Kountanya, R. K. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.04.001 · Cited by 23
Tool temperatures and crack development in milling cutters
Wang, Z. Y., Sahay, C., & Rajurkar, K. P. (1996) · International Journal of Machine Tools and Manufacture · doi:10.1016/0890-6955(94)00123-2 · Cited by 23
Analytical thermal modeling for conventional and in-situ laser assisted turning
Li, Y., Xing, Y., Sun, L., Li, D., Yin, T., Wang, J., Yip, W. S., & To, S. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.109919 · Cited by 21
Heat transfer—a review of 1994 literature
Eckert, E. R. G., Goldstein, R. J., Ibele, W. E., Patankar, S. V., Simon, T. W., Strykowski, P. J., Tamma, K. K., Kuehn, T. H., Bar‐Cohen, A., Heberlein, J. V. R., et al. (1997) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(97)00003-3 · Cited by 21
Synthesis and oxidation behavior of Ti0.35Al0.65By (y = 1.7–2.4) coatings
Kashani, A. H. N., Mráz, S., Holzapfel, D. M., Hans, M., Löfler, L., Ondračka, P., Primetzhofer, D., & Schneider, J. M. (2022) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2022.128190 · Cited by 20
Çakır, E., Özlü, E., Bakkal, M., & Budak, E. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1479-3 · Cited by 18
An Improved Transient Model of Tool Temperatures in Metal Cutting
Jen, T., & Anagonye, A. U. (2000) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1334865 · Cited by 18
Jiang, F., Liu, Z., Yang, F., Zhong, Z., & Sun, S. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1733-3 · Cited by 17
Nonlinear Numerical Analysis in Transient Cutting Tool Temperatures
Jen, T., Eapen, S., & Gutierrez, G. (2003) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1536173 · Cited by 17
Mechanical and thermal modeling of modulation-assisted machining
Gao, Y., Sun, R. L., Chen, Y., & Leopold, J. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8421-y · Cited by 17
Assessment of Tool Wear in Milling Using Acoustic Emission Detected by a Fiber-Optic Interferometer
Carolan, T. A., Hand, D. P., Barton, J. S., Jones, J. D. C., Wilkinson, P., & Reuben, R. L. (1996) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2831048 · Cited by 16
Investigation of heat partition and instantaneous temperature in milling of Ti-6Al-4V alloy
Chen, G., Gao, Q., Yang, X., Liu, J., Su, Y., & Ren, C. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.05.051 · Cited by 15
Research on cutting temperature of work-piece in milling process based on WPSO
Feng, Y., Zheng, L., Wang, M., Wang, B., Hou, J., & Yuan, T. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6808-9 · Cited by 15
A novel analytical algorithm for prediction of workpiece temperature in end milling
Akhtar, W., & Lazoğlu, İ. (2022) · CIRP Annals · doi:10.1016/j.cirp.2022.03.039 · Cited by 15
Estimation of Milling Tool Temperature Considering Coolant and Wear
Kuo, H.-Y., Meyer, K. A., Lindle, R., & Ni, J. (2012) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4005799 · Cited by 15
Korkmaz, M. E., Gupta, M. K., Sarıkaya, M., Günay, M., Boy, M., Yaşar, N., Demirsöz, R., & Pehlivan, F. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-024-09163-7 · Cited by 15
Experiment, modeling, and analysis for temperature field of milling insert
Liu, G., Tan, G., & Li, G. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1322-3 · Cited by 14
Wang, Y., Wang, Z., Ni, P., Wang, D., Lu, Y., Lu, H., Guo, S., & Chen, Z. (2023) · Coatings · doi:10.3390/coatings13040758 · Cited by 13
Effect of temperature on milling stability of thin-walled parts
Liu, Y., Cui, N., Chen, H., Yan, X., Zhao, C., Bao, K., Shan, Y., & Yin, Z. (2022) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/09544054221101752 · Cited by 13
Studies on Passive Cooling Techniques in Dry Machining
Prasad, M. S. G., & Drakshayani, D. N. (2010) · Materials and Manufacturing Processes · doi:10.1080/10426910903365703 · Cited by 13
The effect of thermal property degradation on wear of WC-CO inserts in dry cutting
Abdel-Aal, H. A., Nouari, M., & Mansori, M. E. (2008) · Wear · doi:10.1016/j.wear.2008.04.004 · Cited by 13
FINITE ELEMENT SIMULATION OF METAL CUTTING CONSIDERING CHIP BEHAVIOR AND TEMPERATURE DISTRIBUTION
Hossainy, T. M. E., El-Shazly, M. H., & Abd-Rabou, M. (2002) · Materials and Manufacturing Processes · doi:10.1081/amp-100108700 · Cited by 12
Fan, J.-N., Yang, Y., Wang, Y., Qian, B., Li, M., & Zhou, Y. H. (2023) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2023.132170 · Cited by 11
Jakobsen, M., Wilkinson, P., Barton, J. S., Reuben, R. L., Harvey, D., & Jones, J. D. C. (2005) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440505x69355 · Cited by 10
Consistent Simulation Strategy for Heat Sources and Fluxes in Milling
Pütz, M., Oppermann, C., Semmler, U., Bräunig, M., & Karagüzel, U. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.06.067 · Cited by 10
Shi, Y., Zheng, J., Pei, F., Shang, P., Liu, C., Chen, T., & Shan, S. (2022) · Materials · doi:10.3390/ma15228178 · Cited by 9
Artificial Neural Network Model for Prediction of Tool Tip Temperature and Analysis
Taşdemir, Ş. (2018) · International Journal of Intelligent Systems and Applications in Engineering · doi:10.18201/ijisae.2018637937 · Cited by 7
NUMERICAL ANALYSIS IN INTERRUPTED CUTTING TOOL TEMPERATURES
Jen, T., Gutierrez, G., & Eapen, S. (2001) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407780117053 · Cited by 6
Yang, M., Zhang, F., & Teramoto, K. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-12216-0 · Cited by 5
Mathematical analysis of transient temperature changes in the chip root during milling
Pálmai, Z. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0042-6 · Cited by 5
Cooling mechanism and drill wear of low-frequency axial vibration drilling of titanium alloy
Shi, Y., Zheng, J., Cao, C., Chen, T., Pei, F., Jiang, D., & Peng, C. Y. (2025) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-025-0328-9 · Cited by 4
Numerical analysis of Cutting Tool Temperature in Dry Machining Processes with Embedded Heat Pipe
Al-Odat, M. Q. (2010) · Engineering Computations · doi:10.1108/02644401011050930 · Cited by 4
Pütz, M., Ihlenfeldt, S., Karagüzel, U., Semmler, U., Budak, E., Bakkal, M., & Wertheim, R. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.107 · Cited by 4
Uzorh, A., & Nwufo, O. C. (2013) · doi:10.13140/rg.2.2.33038.82243 · Cited by 4
Analytical Study of the Effect of Heat Pipe Cooling in Machining
Chiou, R. Y., Aynbinder, V., Stepanskiy, L. G., Lu, L. N., Rauniar, S., Chen, J. S. J., & North, M. T. (2005) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2005-79344 · Cited by 3
Nonlinear Finite Element Analysis of Machining and Sheet Metal Forming
Madhavan, V., Gandikota, V., & Agarwal, R. K. (2000) · AIAA Journal · doi:10.2514/3.14664 · Cited by 3
Liu, H., Zhang, Q., & Sun, X. (2024) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-024-05256-4 · Cited by 2
Theoretical Determination of Temperature Field in Orthogonal Machining
Ojolo, S. J., Oluwarotimi, I. S., & Tolu, Y. O. (2013) · Open Journal Systems (Taiwan Association of Engineering and Technology Innovation) · Cited by 2
A finite-element heat transfer model for orthogonal cutting
Kumar, A., Bhardwaj, R., & Joshi, S. S. (2020) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2020.1741059 · Cited by 2
França, P. H. P. (2021) · doi:10.14393/ufu.di.2021.283 · Cited by 2
Milling Characteristic of Plastic Profiles Manufacturing
Ning, F., Ze, X. B., & Fu, X. L. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.230-232.522 · Cited by 1
Pjovimo teorija ir metalo pjovimo įrankiai
Mokšin, V. (2018) · doi:10.20334/2018-042-s · Cited by 1
ABDELKRIM, F., Abdelkrim, M., Belloufi, A., Tâmpu, C., Chiriță, B., & Brabie, G. (2023) · Journal of Applied Research and Technology · doi:10.22201/icat.24486736e.2023.21.3.1818 · Cited by 1
Luchesi, V. M. (2014) · UpSpace Institutional Repository (University of Pretoria) · Cited by 1
Adiabatic plastic deformation: the case of cutting process
Maier, C., Vacarus, V., Banu, M., & Epureanu, A. (2009) · International Conference on System Science and Simulation in Engineering
Research of the temperature at the rake face of cutting tools by using boundary element method
Lin, J.-C., & Liang, P.-W. (2003) · International Symposium on Electronic Materials and Packaging (EMAP) · doi:10.1109/emap.2002.1188841
Şahin, H. M., & Acır, A. (2003) · Journal of Polytechnic · Cited by 3
Non-linear finite element analysis of manufacturing processes
Agarwal, R. K., Madhavan, V., & Gandikota, V. (1998) · AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO) · doi:10.2514/6.1998-4898
Real-Time Adaptive Cutting Tool Flank Wear Prediction
Lee, G., & Schueller, J. K. (2014) · Journal of Mechatronics · doi:10.1166/jom.2014.1054
frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi
Karagüzel, U., Bakkal, M., & Budak, E. (2017) · Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi · doi:10.17341/gazimmfd.337635
Ji, X. (2022) · Springer eBooks · doi:10.1007/978-981-19-7087-0_1
A wireless and passive tool holder for online measurement of milling temperature
Sun, X., Zhang, Q., Tang, Z., & Liu, H. (2024) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2842/1/012072
Influence of the contact pressure distribution in boring machining of two coupled part components
Carrero-Blanco, J., Cumbicus, W. E., Francisco, O., & Amestoy, M. E. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15986-x
Chen, P.-H., Kao, H.-Y., Wu, M.-Z., Chang, P., & Li, W. (2026) · IEEE Sensors Journal · doi:10.1109/jsen.2026.3677478
Cheng, W. (2019) · theses.fr (ABES) · doi:10.70675/10370c8czc903z4674zb176z20cf00af2698 · Cited by 2
The design of an effective sensor fusion model for condition monitoring systems of turning processes
Al-Azmi, A. (2008) · Nottingham Trent University's Institutional Repository (Nottingham Trent Repository)
Modeling of orthogonal profile, thermal and tribological behavior
Mzad, H., & Saad, M. (2007) · Czasopismo Techniczne. Mechanika
Metadata
- Authors
- Radulescu, R., & Kapoor, S. G.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- ORCID
- Kapoor, S. G.
- Venue
- Journal of Engineering for Industry
- Publisher
- ASME International
- Published
- 1994-05-01
- Volume
- 116
- Issue
- 2
- Pages
- 135-143
- ISSN
- 0022-0817 (ISSN-L)
- OpenAlex
- W1990938419
- Cited by
- 92
- References
- 0
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 3 · 2023: 4 · 2022: 7 · 2021: 2 · 2020: 1 · 2019: 2 · 2018: 7 · 2017: 4 · 2016: 5 · 2015: 3 · 2014: 2 · 2013: 3 · 2012: 2
- FWCI
- 8.06
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Engineering for Industry (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
- Physical Sciences › Engineering › Computational Mechanics › Advanced Numerical Analysis Techniques
- Keywords
- interrupted cutting, continuous cutting, metal cutting, tool-chip interface temperature, heat flux, energy balance, heat transfer analysis, cutting force, cutting speed, analytical model
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.