Torque of Tapered Roller Bearings
The DOI matches its Crossref record.
Abstract
An analytic tapered roller bearing torque model is presented along with laboratory test data. Initial results of this proposed model are favorable. An accurate general purpose torque prediction tool could be obtained by extending the concepts presented in conjunction with a more comprehensive analysis of actual bearing operating conditions. By using EHL (Elastohydrodynamic Lubrication) theory and micro-macro contact analysis, the bearing torque can be determined by predicting each torque component for each roller due to raceway rolling, raceway moments due to EHL pressure distribution, and frictional force of rib-roller end contact. The roughness effect of contact surfaces, effect of EHL film thickness parameter (the ratio of film thickness to composite surface roughness), and thermal EHL effects are also included. A bearing torque test rig, which can measure the torque of cup race, cone race, and rib separately, was built and used to provide test data. Good agreement between the experimentally measured bearing torques and the predictions of the new torque model has been obtained. This torque model will provide a greater fundamental understanding and is more versatile over a wide range of operating conditions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The dimensionless parameters 𝑈 , 𝑊 , and 𝐺 (see Eq. (3)) have been shown time and time again to provide excellent predictive power for the EHL behavior of the contact [43-46][11,47].”
From Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts (2024) · cites this paper as [45]
Citations
Cites
Still being checked.
Cited by
Ball Bearing and Tapered Roller Bearing Torque: Analytical, Numerical and Experimental Results
Houpert, L. (2002) · Tribology Transactions · doi:10.1080/10402000208982559 · Cited by 126
Bearings in Aerospace, Application, Distress, and Life: A Review
Kumar, N., & Satapathy, R. (2023) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-023-01658-z · Cited by 120
Yan, K. L., Wang, N., Zhai, Q., Zhu, Y., Zhang, J., & Niu, Q. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.057 · Cited by 105
Dynamic Analysis of Cage Behavior in a Tapered Roller Bearing
Sakaguchi, T., & Harada, K. (2006) · Journal of Tribology · doi:10.1115/1.2197527 · Cited by 86
The effect of angular misalignment on the running torques of tapered roller bearings
Tong, V.-C., & Hong, S.-W. (2015) · Tribology International · doi:10.1016/j.triboint.2015.11.005 · Cited by 83
Metadata
- Authors
- Zhou, R. S., & Hoeprich, M. R.
- Affiliations
- Timken (United States) (US)
- Venue
- Journal of Tribology
- Publisher
- Wiley
- Published
- 1991-07-01
- Volume
- 113
- Issue
- 3
- Pages
- 590-597
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W2058329285
- Cited by
- 127
- References
- 0
- Citations by year
- 2026: 12 · 2025: 10 · 2024: 13 · 2023: 17 · 2022: 8 · 2021: 7 · 2020: 4 · 2019: 4 · 2018: 8 · 2017: 5 · 2016: 3 · 2015: 4 · 2014: 1 · 2012: 2
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Tribology (publishedVersion)
- Funders
- Purdue University
- Northwestern University
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- tapered roller bearings, bearing torque, elastohydrodynamic lubrication, film thickness, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.