Torque of Tapered Roller Bearings
The DOI matches its Crossref record.
Abstract
An analytic tapered roller bearing torque model is presented along with laboratory test data. Initial results of this proposed model are favorable. An accurate general purpose torque prediction tool could be obtained by extending the concepts presented in conjunction with a more comprehensive analysis of actual bearing operating conditions. By using EHL (Elastohydrodynamic Lubrication) theory and micro-macro contact analysis, the bearing torque can be determined by predicting each torque component for each roller due to raceway rolling, raceway moments due to EHL pressure distribution, and frictional force of rib-roller end contact. The roughness effect of contact surfaces, effect of EHL film thickness parameter (the ratio of film thickness to composite surface roughness), and thermal EHL effects are also included. A bearing torque test rig, which can measure the torque of cup race, cone race, and rib separately, was built and used to provide test data. Good agreement between the experimentally measured bearing torques and the predictions of the new torque model has been obtained. This torque model will provide a greater fundamental understanding and is more versatile over a wide range of operating conditions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The dimensionless parameters 𝑈 , 𝑊 , and 𝐺 (see Eq. (3)) have been shown time and time again to provide excellent predictive power for the EHL behavior of the contact [43-46][11,47].”
From Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts (2024) · cites this paper as [45]
Citations
Cites
Still being checked.
Cited by
Ball Bearing and Tapered Roller Bearing Torque: Analytical, Numerical and Experimental Results
Houpert, L. (2002) · Tribology Transactions · doi:10.1080/10402000208982559 · Cited by 126
Bearings in Aerospace, Application, Distress, and Life: A Review
Kumar, N., & Satapathy, R. (2023) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-023-01658-z · Cited by 120
Yan, K. L., Wang, N., Zhai, Q., Zhu, Y., Zhang, J., & Niu, Q. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.057 · Cited by 105
Dynamic Analysis of Cage Behavior in a Tapered Roller Bearing
Sakaguchi, T., & Harada, K. (2006) · Journal of Tribology · doi:10.1115/1.2197527 · Cited by 86
The effect of angular misalignment on the running torques of tapered roller bearings
Tong, V.-C., & Hong, S.-W. (2015) · Tribology International · doi:10.1016/j.triboint.2015.11.005 · Cited by 83
Surface Topography and Fatigue Life of Rolling Contact Bearing
Zhou, R. S. (1993) · Tribology Transactions · doi:10.1080/10402009308983167 · Cited by 74
Self-citationA model to predict initiation and propagation of micro-pitting on tooth flanks of spur gears
Xu, X., Lai, J., Lohmann, C., Tenberge, P., Weibring, M., & Dong, P. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.01.004 · Cited by 73
Creju, S., Bercea, I., & Mitu, N. (1995) · Wear · doi:10.1016/0043-1648(94)06551-9 · Cited by 63
A New Model to Estimate Friction Torque in a Ball Screw System
Olaru, D. N., Puiu, G. C., Balan, L. C., & Puiu, V. (2006) · Kluwer Academic Publishers eBooks · doi:10.1007/1-4020-2933-0_20 · Cited by 59
Experimental and analytical investigation of fluid drag losses in rolling element bearings
Peterson, W., Russell, T. E., Sadeghi, F., & Berhan, M. T. (2021) · Tribology International · doi:10.1016/j.triboint.2021.107106 · Cited by 56
Study on the running torque of angular contact ball bearings subjected to angular misalignment
Tong, V.-C., & Hong, S.-W. (2017) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650117732921 · Cited by 54
Determination of hydraulic losses in radial cylindrical roller bearings using CFD simulations
Feldermann, A., Fischer, D., Neumann, S., & Jacobs, G. (2017) · Tribology International · doi:10.1016/j.triboint.2017.03.020 · Cited by 50
Hydrodynamic force and moment in pure rolling lubricated contacts. Part 1: Line contacts
Biboulet, N., & Houpert, L. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet790 · Cited by 45
Maccioni, L., Chernoray, V. G., Bohnert, C., & Concli, F. (2021) · Tribology International · doi:10.1016/j.triboint.2021.107313 · Cited by 43
Zhang, C., Gu, L., Mao, Y., & Wang, L. (2018) · Friction · doi:10.1007/s40544-018-0232-8 · Cited by 41
Analysis of Double-Row Tapered Roller Bearings, Part I - Model
Bercea, I., Creţu, S., & Nélias, D. (2003) · Tribology Transactions · doi:10.1080/10402000308982622 · Cited by 41
Dynamic Analysis of Cage Stress in Tapered Roller Bearings Using Component-Mode-Synthesis Method
Sakaguchi, T., & Harada, K. (2008) · Journal of Tribology · doi:10.1115/1.3002326 · Cited by 40
Stammler, M., Schwack, F., Bader, N., Reuter, A., & Poll, G. (2018) · Wind energy science · doi:10.5194/wes-3-97-2018 · Cited by 39
Microtextured surfaces in higher loaded rolling-sliding EHL line-contacts
Marian, M., Tremmel, S., & Wartzack, S. J. (2018) · Tribology International · doi:10.1016/j.triboint.2018.06.024 · Cited by 38
Improved formulation for running torque in angular contact ball bearings
Tong, V.-C., & Hong, S.-W. (2018) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-018-0006-2 · Cited by 38
Prediction of Roller Skewing in Tapered Roller Bearings
Nélias, D., Bercea, I., & Paleu, V. (2008) · Tribology Transactions · doi:10.1080/10402000701730486 · Cited by 37
Evaluation of friction calculation methods for rolling bearings
Zander, M., Otto, M., Lohner, T., & Stahl, K. (2023) · Forschung im Ingenieurwesen · doi:10.1007/s10010-023-00715-1 · Cited by 35
Sadeghi, F., Arya, U., Aamer, S., & Meinel, A. (2024) · Journal of Tribology · doi:10.1115/1.4065663 · Cited by 33
Wu, P.-Y., He, C., Chang, Z., Li, X. L., Ren, Z. Y., Li, D. Y., & Ren, C. (2022) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03726-1 · Cited by 32
Predicting Friction of Tapered Roller Bearings with Detailed Multi-Body Simulation Models
Wingertszahn, P., Koch, O., Maccioni, L., Concli, F., & Sauer, B. (2023) · Lubricants · doi:10.3390/lubricants11090369 · Cited by 31
New Mandrel Design for Ring Hoop Tensile Testing
Khalfallah, A., Ktari, Z., Leitão, C. M. A., & Fernandes, J. V. (2021) · Experimental Techniques · doi:10.1007/s40799-021-00462-4 · Cited by 29
Analysis of non-uniform load distribution and stiffness for a preloaded roller linear motion guide
Cheng, D.-J., Xu, S.-H., Kim, S.-J., & Zhang, S. (2021) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2021.104407 · Cited by 29
Nogi, T. (2015) · Journal of Tribology · doi:10.1115/1.4030203 · Cited by 29
A dynamic analysis of tapered roller bearings under fully flooded conditions part 2: results
Creţu, S., Mitu, N., & Bercea, I. (1995) · Wear · doi:10.1016/0043-1648(94)06552-7 · Cited by 29
Thermal Non-Newtonian EHL Analysis of Rib-Roller End Contact in Tapered Roller Bearings
Jiang, X., Wong, P. L., & Zhang, Z. (1995) · Journal of Tribology · doi:10.1115/1.2831530 · Cited by 29
Maccioni, L., Chernoray, V. G., & Concli, F. (2023) · Tribology International · doi:10.1016/j.triboint.2023.108824 · Cited by 27
Yang, Y., Danyluk, S. S., & Hoeprich, M. R. (1999) · Journal of Tribology · doi:10.1115/1.555397 · Cited by 24
Self-citationExperimental and numerical roller skew in tapered roller bearings
Majdoub, F., Saunier, L., Sidoroff, C., & Mevel, B. (2020) · Tribology International · doi:10.1016/j.triboint.2019.106142 · Cited by 23
Simulation of Microtextured Surfaces in Starved EHL Contacts Using Commercial FE Software
Marian, M., Weschta, M., Tremmel, S., & Wartzack, S. J. (2017) · Materials Performance and Characterization · doi:10.1520/mpc20160010 · Cited by 21
Kelley, J., Schneider, V., Poll, G., & Marian, M. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109988 · Cited by 20
Darul, L., Touret, T., Changenet, C., & Ville, F. (2023) · Tribology Transactions · doi:10.1080/10402004.2023.2235400 · Cited by 20
Investigation of the Frictional Behavior in a Roller Linear Motion Guide under Mixed EHL
Cheng, D.-J., Xu, F., Xu, S.-H., & Kim, S.-J. (2020) · Tribology Transactions · doi:10.1080/10402004.2020.1726541 · Cited by 20
Analysis of Dynamic Characteristics of Grease‐Lubricated Tapered Roller Bearings
Wu, Z., Xu, Y., & Deng, S. (2018) · Shock and Vibration · doi:10.1155/2018/7183042 · Cited by 19
Dindar, A., Hong, I. J., Garg, A., & Kahraman, A. (2021) · Tribology Transactions · doi:10.1080/10402004.2021.1937760 · Cited by 19
Improved friction model for the roller LM guide considering mechanics analysis
Cheng, D.-J., Park, T.-J., & Kim, S.-J. (2018) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-018-0529-6 · Cited by 19
Thermal effects in elastohydrodynamic spinning circular contacts
Doki-Thonon, T. (2012) · theses.fr (ABES) · doi:10.70675/b5b8aae1zd353z4c31z97fez8bb0ebb4c920 · Cited by 19
Experimental Investigation on Temperature Field of a Double-Row Tapered Roller Bearing
Zhou, X., Zhu, Q., Wen, B., Zhao, G. Y., & Han, Q. (2019) · Tribology Transactions · doi:10.1080/10402004.2019.1649509 · Cited by 18
Experimental Study on the Coefficient of Friction of the Ball Screw
Zhang, L.-C., & Zhou, C.-G. (2021) · Journal of Tribology · doi:10.1115/1.4051157 · Cited by 18
Liu, Y., Fan, X., Wang, J., & Liu, X. (2022) · Lubricants · doi:10.3390/lubricants10070154 · Cited by 18
Fatigue Failure and Ball Bearing Friction
Kotzalas, M. N., & Harris, T. A. (2000) · Tribology Transactions · doi:10.1080/10402000008982323 · Cited by 18
Xu, S.-H., Cheng, D.-J., & Zhang, S. (2022) · Measurement · doi:10.1016/j.measurement.2022.110768 · Cited by 17
Hou, Y., Wang, X., Yang, D., & Xiao, Z. (2023) · Friction · doi:10.1007/s40544-022-0678-6 · Cited by 17
Kinematic Equilibrium of Rollers in Tapered Roller Bearings
Majdoub, F., & Mevel, B. (2019) · Tribology Transactions · doi:10.1080/10402004.2018.1554171 · Cited by 17
Thermally-Induced Failures in Railroad Tapered Roller Bearings
Kletzli, D. B., Cusano, C., & Conry, T. F. (1999) · Tribology Transactions · doi:10.1080/10402009908982289 · Cited by 17
Friction moment calculation method for tapered roller bearings under combined loads
Li, X., Liu, J., Huang, S., & Pan, G. (2024) · Science China Technological Sciences · doi:10.1007/s11431-024-2705-6 · Cited by 16
Partial EHL analysis of rib-roller end contact in tapered roller bearings
Wang, W.-H., Wong, P. L., & Zhang, Z. (1996) · Tribology International · doi:10.1016/0301-679x(95)00059-d · Cited by 16
Tribological research on the development of White Etching Cracks (WECs)
Pape, F., Terwey, J. T., Wiesker, S., Averbeck, S., Muhmann, C., Lipinsky, D., Arlinghaus, H. F., Kerscher, E., Sauer, B., & Poll, G. (2018) · Forschung im Ingenieurwesen · doi:10.1007/s10010-018-0289-6 · Cited by 16
Development of Super-Low Friction Torque Tapered Roller Bearing for Improved Fuel Efficiency
Matsuyama, H., Dodoro, H., Ogino, K., Ohshima, H., & Toda, K. (2004) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2004-01-2674 · Cited by 16
Modeling and Dynamic Analysis of Cylindrical Roller Bearings Under Combined Radial and Axial Loads
Wang, Z., Song, J., Li, X., & Yu, Q. (2022) · Journal of Tribology · doi:10.1115/1.4055406 · Cited by 15
Bestimmung des Verlustverhaltens und der Wärmebilanz von Wälzlagern
Jurkschat, T., Otto, M. K., Lohner, T., & Stahl, K. (2018) · Forschung im Ingenieurwesen · doi:10.1007/s10010-018-0266-0 · Cited by 15
Peng, C. Y., Cao, H., Liu, K.-K., Luo, Y., & Shi, J. (2023) · Tribology International · doi:10.1016/j.triboint.2023.109242 · Cited by 14
Measurement of running torque of tapered roller bearings
Blake, J., & Truman, C. E. (2004) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/1350650041762659 · Cited by 14
On the measurement of skew of tapered roller bearings
Yang, Y., Danyluk, S. S., & Hoeprich, M. R. (1999) · Tribology Letters · doi:10.1023/a:1019171909564 · Cited by 14
Self-citationFiedler, S., Kiekbusch, T., & Sauer, B. (2011) · Periodica Polytechnica Mechanical Engineering · doi:10.3311/pp.me.2011-2.03 · Cited by 13
Power loss in rolling bearings and gears lubricated with wind turbine gear oils
Fernandes, C. M. C. G. (2015) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/va52-ky52 · Cited by 13
Dreidimensionale Simulation von kombiniert belasteten Radialzylinderrollenlagern
Koch, O. (2008) · Dokumentenrepositorium der RUB (Ruhr University Bochum) · Cited by 13
Rolling Element Skew in Tapered Roller Bearings
Yang, Y., Danyluk, S. S., & Hoeprich, M. R. (2000) · Tribology Transactions · doi:10.1080/10402000008982379 · Cited by 12
Self-citationDarul, L., Touret, T., Changenet, C., & Ville, F. (2024) · Lubricants · doi:10.3390/lubricants12010014 · Cited by 11
Analytical formulation for sliding friction torque in cylindrical roller bearings
Rivera, G., Po, P. J., Kang, C. G., & Hong, S.-W. (2024) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-024-0805-6 · Cited by 11
Dindar, A., Akkök, M., & Çalışkan, M. (2016) · Journal of Tribology · doi:10.1115/1.4033364 · Cited by 11
Zusammenhang von Ermüdung, Rissbildung, Verschleiß und Graufleckentragfähigkeit an Stirnrädern
Lohmann, C. H. (2016) · Dokumentenrepositorium der RUB (Ruhr University Bochum) · Cited by 11
High-speed rail roller bearings with built-in triboelectric sensors
Li, S., Gao, S., Wang, S., Gu, X., Liu, Y., Zhang, X., Hu, J., Pennacchi, P., Pu, H., Luo, J., et al. (2025) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2025.102595 · Cited by 10
Numerical Investigation of Oil–Air Flow Inside Tapered Roller Bearings with Oil Bath Lubrication
Wang, Z., Wang, F., Duan, H., Wang, W.-H., Guo, R., & Yu, Q. (2023) · Journal of Applied Fluid Mechanics · doi:10.47176/jafm.17.1.1944 · Cited by 10
Effects of Defect on Roller-Raceway Contact State and Friction Torque of Tapered Roller Bearings
Liu, Y., Kang, W., Zhu, Y., Yan, K. L., & Hong, J. (2020) · Journal of Tribology · doi:10.1115/1.4047194 · Cited by 10
Friction torque study on double-row tapered roller bearing
Xu, T., Yang, L., & Wu, Y. (2019) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2019.8827169 · Cited by 10
Experimental Analysis of Rolling Torque and Thermal Inlet Shear Heating in Tapered Roller Bearings
Manjunath, M., Fauconnier, D., Ost, W., & Baets, P. D. (2023) · Machines · doi:10.3390/machines11080801 · Cited by 9
Design and Test Rig Experiments of a High Speed Tapered Roller Bearing for Main Spindle Applications
Brecher, C., Fey, M., Bartelt, A., & Hassis, A. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.04.053 · Cited by 9
On the Measurement of Roller Skew of Tapered Roller Bearings
Falodi, A., Chen, Y., Caspall, M., Earthrowl, B., & Dell, D. (2012) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.217-219.2328 · Cited by 8
Cai, G., Hou, Y., Wang, X., Sun, S., Zhang, Y., & Wang, N. (2024) · Tribology International · doi:10.1016/j.triboint.2024.110071 · Cited by 8
The Analysis of Frictional Torque for Tapered Roller Bearings Using EHD Theory
Matsuyama, H., Kamamoto, S., & Asano, K. (1998) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/982029 · Cited by 8
Untersuchungen zur Wirkungsweise von Mikrotexturen in elastohydrodynamischen Gleit-/Wälzkontakten
Weschta, M. (2018) · VDI Verlag eBooks · doi:10.51202/9783186448019 · Cited by 8
FRICTION IN THE CIRCULAR – ARC GROOVES LINEAR ROLLING GUIDANCE SYSTEM
Olaru, D. N., Lorenz, P., Rudy, D., Prisacaru, G., & Antălucă, D. (n.d.) · Cited by 8
Dynamic wear evolution analysis of spur gear considering tribo-dynamic effect
Lai, J., Dong, P., & Yue, H. (2026) · Tribology International · doi:10.1016/j.triboint.2025.111651 · Cited by 7
The Friction of Radially Loaded Hybrid Spindle Bearings under High Speeds
Gärtner, M., Brecher, C., Neus, S., Eckel, H.-M., Bartelt, A., Hoppert, M., & Ilkhani, M. R. (2023) · Machines · doi:10.3390/machines11060649 · Cited by 7
Wragge-Morley, R., Barnaby, G. C., Yon, J., Akehurst, S., & Burgess, S. C. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad96d6 · Cited by 6
Khan, M. I., Maccioni, L., & Concli, F. (2025) · Lubricants · doi:10.3390/lubricants13050204 · Cited by 6
Study on Cage Wear of Railway Traction Motor Bearings Based on Analysis of Rolling Element Motion
SUZUKI, D., Takahashi, K., ITOIGAWA, F., & Maegawa, S. (2023) · Machines · doi:10.3390/machines11060594 · Cited by 6
A Contact Stress Model for Predicting Rolling Contact Fatigue
Zhou, R.-S., & Nixon, H. P. (1992) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/921720 · Cited by 6
Self-citationEXPERIMENTAL STUDIES ON THE THERMAL BEHAVIOUR OF A TAPERED ROLLER BEARING ASSEMBLY
Schwarz, V. A. (2006) · Cited by 6
Theoretical Calculation and Simulation Analysis of No-load Torque of Main Reducer
Xu, J., & Sheng, G. (2017) · International Conference on Applied Mathematics, Modeling and Simulation (AMMS) · doi:10.2991/amms-17.2017.68 · Cited by 5
Power Loss Studies for Rolling Element Bearings Subject to Combined Radial and Axial Loading
Zhou, S., Singh, A. K., Kahraman, A., Hong, I. J., & Vedera, K. (2023) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2023-01-0461 · Cited by 4
Takahashi, K., SUZUKI, D., KIKAWA, S., & OKAMURA, Y. (2023) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/13506501231216503 · Cited by 4
Barnaby, G. C., Yon, J., Hicks, B. J., Burgess, S. C., Mellor, P., & Wragge-Morley, R. (2025) · Tribology International · doi:10.1016/j.triboint.2025.110737 · Cited by 4
Hou, Y., Wang, X., Xu, B., Geng, Y., Li, Q., & Yang, D. (2023) · Journal of Tribology · doi:10.1115/1.4062367 · Cited by 4
SUZUKI, D., TAKAHASHI, K., ITOIGAWA, F., & Maegawa, S. (2022) · Transactions of the JSME (in Japanese) · doi:10.1299/transjsme.22-00153 · Cited by 4
Investigation of Package Bearings to Improve Driveline Performance
Gradu, M., & Batereau, K. (2000) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2000-01-1785 · Cited by 4
Fernández, M. M., Rüth, L., & Sauer, B. (2021) · Forschung im Ingenieurwesen · doi:10.1007/s10010-021-00494-7 · Cited by 3
Ohta, H., & Matsuyama, D. (2024) · Journal of Tribology · doi:10.1115/1.4064394 · Cited by 3
The Dynamics of Tapered-roller Bearings – A Bottom-up Validation Study
Razpotnik, M., Bischof, T., & Boltežar, M. (2023) · Strojniški vestnik – Journal of Mechanical Engineering · doi:10.5545/sv-jme.2023.592 · Cited by 3
Evaluation of Friction Torque in Tapered Roller Bearings
Lee, S., & An, H. G. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-01-3047 · Cited by 3
Dahiwal, R., Aschenbrenner, A., Schleich, B., Wiesker, S., Kiekbusch, T., Tremmel, S., Wartzack, S. J., & Sauer, B. (2018) · ERef Bayreuth (University of Bayreuth) · Cited by 3
Schiefstellung und Axialschubverhalten von Zylinderrollenlagern
Keßler, A. (2010) · Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) · doi:10.15488/7435 · Cited by 3
Reibung von Kurbelwellen-Wälzlagern
Hollen, J. V. (2013) · Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) · doi:10.15488/8091 · Cited by 3
Combined analytical and empirical modelling of power losses in rolling element bearings
Brossier, P. (2020) · theses.fr (ABES) · doi:10.70675/4b2442e6zf561z4310z9e18zc67c4fd8843f · Cited by 3
Effects of Roller-End/Rib Geometrical Shape of Cylindrical Roller Bearings on Tribological Behavior
Wang, Z., Li, X., Wu, F. H., & Xiao, Q. (2025) · Journal of Tribology · doi:10.1115/1.4068174 · Cited by 2
Metadata
- Authors
- Zhou, R. S., & Hoeprich, M. R.
- Affiliations
- Timken (United States) (US)
- Venue
- Journal of Tribology
- Publisher
- Wiley
- Published
- 1991-07-01
- Volume
- 113
- Issue
- 3
- Pages
- 590-597
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W2058329285
- Cited by
- 127
- References
- 0
- Citations by year
- 2026: 12 · 2025: 10 · 2024: 13 · 2023: 17 · 2022: 8 · 2021: 7 · 2020: 4 · 2019: 4 · 2018: 8 · 2017: 5 · 2016: 3 · 2015: 4 · 2014: 1 · 2012: 2
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Tribology (publishedVersion)
- Funders
- Purdue University
- Northwestern University
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- tapered roller bearings, bearing torque, elastohydrodynamic lubrication, film thickness, surface roughness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.