Piezoviscous-Rigid Rolling and Sliding Traction Forces, Application: The Rolling Element–Cage Pocket Contact
The DOI matches its Crossref record.
Abstract
Piezoviscous Rigid (PVR) film thicknesses, rolling and sliding traction forces formulas for the line and point contact case have been derived. They have been used to study the Rolling Element (R.E.)–cage pocket contact mechanism. As the R.E. gets closer to the cage web, the lubrication regime change gradually from the PVR regime to Piezoviscous Elastic (PVE or EHD) regime when steel cages are used. If plastic cages are used, the lubrication regime moves from the Isoviscous Elastic (IVE) regime to EHD regime. For the conditions simulated herein, the transition occurs at typical film thickness values of the order of 0.5 micrometers and substantially large loads can be calculated in the R.E.–steel cage contact. They can be of the order of 100 N at the transition. In many circumstances, the PVR regime prevails and the braking moment due to hydrodynamic traction in the contact can be easily calculated. A tight osculation between the R.E. and the cage pocket will increase significantly the load and braking moment on the R.E. Starvation effects are also estimated and cause a reduction of the load, but not of the braking moment.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In a previous study [42,60] based on extensive experimental evidence [65], it was found that the model proposed by Houpert [62] showed good agreement with the measured friction torques of cylindrical roller bearings and tapered roller bearings.”
From Enhancing practical modeling: A neural network approach for locally-resolved prediction of elastohydrodynamic line contacts (2024) · cites this paper as [62]
Citations
Cites
Still being checked.
Cited by
Ball Bearing and Tapered Roller Bearing Torque: Analytical, Numerical and Experimental Results
Houpert, L. (2002) · Tribology Transactions · doi:10.1080/10402000208982559 · Cited by 127
Self-citationRolling-element bearing modeling: A review
Hong, S.-W., & Tong, V.-C. (2016) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-016-0200-z · Cited by 126
CAGEDYN: A Contribution to Roller Bearing Dynamic Calculations Part I: Basic Tribology Concepts
Houpert, L. (2009) · Tribology Transactions · doi:10.1080/10402000903132093 · Cited by 79
Self-citationThe influence of the lubricant viscosity on the rolling friction torque
Bălan, M. R. D., Stamate, V. C., Houpert, L., & Olaru, D. N. (2013) · Tribology International · doi:10.1016/j.triboint.2013.11.017 · Cited by 60
Self-citationHydrodynamic force and moment in pure rolling lubricated contacts. Part 2: Point contacts
Biboulet, N., & Houpert, L. (2010) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet791 · Cited by 51
Self-citation
Metadata
- Authors
- Houpert, L.
- Affiliations
- SKF (Netherlands) (NL)
- Corresponding author
- Houpert, L.
- ORCID
- Houpert, L.
- Venue
- Journal of Tribology
- Publisher
- Wiley
- Published
- 1987-04-01
- Volume
- 109
- Issue
- 2
- Pages
- 363-370
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W2041156567
- Cited by
- 51
- References
- 0
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 9 · 2023: 10 · 2022: 3 · 2021: 3 · 2020: 3 · 2018: 1 · 2016: 1 · 2015: 1 · 2014: 1 · 2013: 2
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Tribology (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- Keywords
- elastohydrodynamic lubrication, lubrication regime transition, film thickness, steel cage, starved lubrication, ball bearings
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.