The DOI matches its Crossref record.
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation Results
Abstract
Utilizing the theory and numerical procedure developed by the authors in an earlier publication the influence of lubricant starvation on minimum film thickness was investigated. This study of lubricant starvation was performed simply by moving the inlet boundary closer to the contact center. From the results it was found that for the range of conditions considered the value of dimensionless inlet distance at the boundary between fully flooded and starved conditions (m*) can be expressed simply as m*=1+3.06Rxb2Hc,F0.58 or m*=1+3.34Rxb2Hmin,F0.56 that is, for a dimensionless inlet distance (m) less than m*, starvation occurs, and for m ≥ m*, a fully flooded condition exists. Furthermore, it has been possible to express the central and minimum film thickness for a starved condition as Hc,S=Hc,Fm−1m*−10.29Hmin,S=Hmin,Fm−1m*−10.25 Contour plots of the pressure and film thickness in and around the contact are shown for the fully flooded and starved lubricant condition. From these contour plots it was observed that the pressure spike becomes suppressed and the film thickness decreases substantially as starvation increases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Review of Elasto-Hydrodynamic Lubrication Theory
Lugt, P. M., & Morales-Espejel, G. E. (2011) · Tribology Transactions · doi:10.1080/10402004.2010.551804 · Cited by 260
Marian, M., Bartz, M., Wartzack, S., & Rosenkranz, A. (2020) · Lubricants · doi:10.3390/lubricants8100095 · Cited by 92
Predicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
Non-Newtonian mixed elastohydrodynamics of differential hypoid gears at high loads
Mohammadpour, M., Theodossiades, S., Rahnejat, H., & Saunders, T. (2014) · Meccanica · doi:10.1007/s11012-013-9857-x · Cited by 38
Kelley, J., Schneider, V., Poll, G., & Marian, M. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109988 · Cited by 20
Metadata
- Authors
- Hamrock, B. J., & Dowson, D.
- Venue
- Journal of Lubrication Technology
- Publisher
- ASME International
- Published
- 1977-01-01
- Volume
- 99
- Issue
- 1
- Pages
- 15-23
- ISSN
- 0022-2305 (ISSN-L)
- OpenAlex
- W2046694575
- Cited by
- 269
- References
- 0
- FWCI
- 4.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation Results. https://app.cochat.ai/papers/10.1115/1.3452973
- The paper
- Hamrock, B. J., & Dowson, D. (1977). Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation Results. Journal of Lubrication Technology. https://doi.org/10.1115/1.3452973
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.