Quantitative Compressibility Effects in Thermal Elastohydrodynamic Circular Contacts
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This paper investigates the effects of lubricant compressibility on the film-forming performance of thermal elastohydrodynamic lubricated (EHL) circular contacts. Numerical film thickness predictions using the classical Dowson and Higginson relationship are compared to those that would be obtained using a more realistic compressibility model, all other parameters kept unchanged. This allows an isolation of the realistic compressibility effects on the film-forming performance. For realistic predictions, the authors consider two model liquids from the 1953 report of the ASME Research Committee on Lubrication, the most and the least compressible. The compressibility of these liquids is modeled using the Tait equation of state (EoS) while all other transport properties are kept unchanged for the sake of isolating compressibility effects. In addition, the same typical generalized-Newtonian behavior is assumed for both model liquids. The results reconfirm the well-known observations that minimum film thickness is very little affected by lubricant compressibility while central film thickness decreases linearly with the increase in volume compression of the lubricant. It is also observed that the relative errors on central film thicknesses induced by the use of the Dowson and Higginson relationship for compressibility increase with load and temperature and are very little affected by mean entrainment speed. Compressibility is shown to be a significant source of error in film-derived measurements of pressure-viscosity coefficients especially at high temperature. The thermodynamic scaling that provides an accurate and consistent framework for the correlation of the thermophysical properties of liquids with temperature and pressure requires an accurate equation of state. In brief, this paper highlights the importance of using realistic transport properties modeling based on thermodynamic scaling for an accurate numerical prediction of the performance of EHL contacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Studies in Newtonian Flow. II. The Dependence of the Viscosity of Liquids on Free-Space
Doolittle, A. K. (1951) · Journal of Applied Physics · doi:10.1063/1.1699894 · Cited by 1,831 · cited 1×
“Third, if the simple EoS (2) is used to calculate the volume used in the Doolittle free-volume model [13] for viscosity, the inflection in the plot of log viscosity versus pressure never occurs.”
A numerical solution to the elasto-hydrodynamic problem
Dowson, D., & Higginson, G. R. (1959) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1959_001_004_02 · Cited by 663
Elasto-hydrodynamic lubrication: A survey of isothermal solutions
Dowson, D., Higginson, G. R., & Whitaker, A. V. (1962) · Journal of Mechanical Engineering Science · doi:10.1243/jmes_jour_1962_004_018_02 · Cited by 157 · cited 3×
“For the earliest numerical studies, a simple isothermal EoS was employed [7] for the qualitative film thickness solutions which famously established the field.”
van Leeuwen, H. (2009) · Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · doi:10.1243/13506501jet504 · Cited by 77 · cited 1×
“Most values of pressure-viscosity coefficient published recently have been the effective pressure-viscosity coefficient obtained by forcing agreement of a classical film thickness formula with a measurement of central film thickness in a circular contact as, for example, in [39].”
Rheology and high-pressure models for quantitative elastohydrodynamics
Bair, S. (2009) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet506 · Cited by 47 · cited 1×
“The most precise temperature-pressure correlations for the thermophysical properties of liquids are obtained from thermodynamic scaling [33] which represents the property as a function of temperature and volume (or density).”
Self-citation
Cited by
Marian, M., Bartz, M., Wartzack, S., & Rosenkranz, A. (2020) · Lubricants · doi:10.3390/lubricants8100095 · Cited by 92
“Line-Contact Point-Contact Elliptical Contact minimum film thickness Dowson and Higginson [14], Moes [16], Dowson [25], Jacobson and Hamrock [26], Johnson [19], Myers et al. [28], Moes [31] Evans and Snidle [33], Hamrock and Dowson [34], Chittenden et al. [35], Hamrock and Dowson [34], Chittenden et al. [35] central f…”
BackgroundInfluentialPredicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
Machine Learning for Film Thickness Prediction in Elastohydrodynamic Lubricated Elliptical Contacts
Issa, J., El Hajj, A., Vergne, P., & Habchi, W. (2023) · Lubricants · doi:10.3390/lubricants11120497 · Cited by 30
Self-citation
Metadata
- Authors
- Habchi, W., & Bair, S.
- Venue
- Journal of Tribology
- Publisher
- ASME International
- Published
- 2012-12-20
- Volume
- 135
- Issue
- 1
- ISSN
- 0742-4787 (ISSN-L)
- 1528-8897
- OpenAlex
- W2098792623
- Cited by
- 36
- References
- 5
- FWCI
- 2.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Quantitative Compressibility Effects in Thermal Elastohydrodynamic Circular Contacts. https://app.cochat.ai/papers/10.1115/1.4023082
- The paper
- Habchi, W., & Bair, S. (2013). Quantitative Compressibility Effects in Thermal Elastohydrodynamic Circular Contacts. Journal of Tribology. https://doi.org/10.1115/1.4023082
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.