CoChat

A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti Stacks

Park, Kyung-Hee, Beal, Aaron, (Dae-Wook) Kim, Dave, Kwon, Patrick, Lantrip, Jeff · 2014 · Journal of Manufacturing Science and Engineering
Cited by 82

The DOI matches its Crossref record.

Abstract

A comparative study was conducted to investigate the resulting tool wear and hole quality when drilling the stacks made of titanium (Ti) and carbon-fiber reinforced plastic (CFRP) versus CFRP only plate using micrograin tungsten carbide (WC) twist drills. The experiments were designed to first drill CFRP alone to create 20 holes. Then, CFRP mechanically stacked with Ti was drilled for the next 20 holes with the same drill bit. This process was repeated until drill bit failure. The drilling experiment was performed at two distinct speeds. Scanning electron microscope (SEM) and confocal laser scanning microscope (CLSM) were used for tool wear analysis. Hole size, hole profile, surface roughness, and Ti burrs were analyzed using coordinate measuring system, surface profilometer and optical microscope. The experimental results indicate that the Ti drilling accelerated flank wear while CFRP drilling deteriorated the cutting edge. Entry delamination, hole diameter errors, and surface roughness of the CFRP plate became more pronounced during the drilling of CFRP-Ti stacks when compared with the results from the drilling of CFRP only. Damage to CFRP holes during CFRP-Ti stack drilling may be caused by Ti chips, Ti adhesion on the tool drill margin or the increased instability as the drill bits wear.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1115/1.4025008

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 82

Metadata

Authors
Park, K.-H., Beal, A., (Dae-Wook) Kim, D., Kwon, P., & Lantrip, J.
Venue
Journal of Manufacturing Science and Engineering
Published
2013-12-13
Volume
136
Issue
1
ISSN
  • 1087-1357 (ISSN-L)
  • 1528-8935
OpenAlex
W2129691078
Cited by
82
References
0
FWCI
8.41
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti Stacks. https://app.cochat.ai/papers/10.1115/1.4025008
The paper
Park, K.-H., Beal, A., (Dae-Wook) Kim, D., Kwon, P., & Lantrip, J. (2014). A Comparative Study of Carbide Tools in Drilling of CFRP and CFRP-Ti Stacks. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.4025008

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.