The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Multiple-Material Topology Optimization of Compliant Mechanisms Created Via PolyJet Three-Dimensional Printing
Abstract
Compliant mechanisms are able to transfer motion, force, and energy using a monolithic structure without discrete hinge elements. The geometric design freedoms and multimaterial capability offered by the PolyJet 3D printing process enables the fabrication of compliant mechanisms with optimized topology. The inclusion of multiple materials in the topology optimization process has the potential to eliminate the narrow, weak, hingelike sections that are often present in single-material compliant mechanisms and also allow for greater magnitude deflections. In this paper, the authors propose a design and fabrication process for the realization of 3-phase, multiple-material compliant mechanisms. The process is tested on a 2D compliant force inverter. Experimental and numerical performance of the resulting 3-phase inverter is compared against a standard 2-phase design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The method of moving asymptotes—a new method for structural optimization
Svanberg, K. (1987) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620240207 · Cited by 5,573
Optimal shape design as a material distribution problem
Bendsøe, M. P. (1989) · Structural Optimization · doi:10.1007/bf01650949 · Cited by 4,521
Material interpolation schemes in topology optimization
Bendsøe, M. P., & Sigmund, O. (1999) · Archive of Applied Mechanics (Ingenieur Archiv) · doi:10.1007/s004190050248 · Cited by 2,827
Sigmund, O., & Petersson, J. (1998) · Structural Optimization · doi:10.1007/bf01214002 · Cited by 2,118
Topology optimization of non-linear elastic structures and compliant mechanisms
Bruns, T. E., & Tortorelli, D. A. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(00)00278-4 · Cited by 1,385
On the Design of Compliant Mechanisms Using Topology Optimization*
Sigmund, O. (1997) · Mechanics of Structures and Machines · doi:10.1080/08905459708945415 · Cited by 1,384
Guest, J. K., Prévost, J. H., & Belytschko, T. (2004) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1064 · Cited by 1,300
Self-citationStiffness design of geometrically nonlinear structures using topology optimization
Buhl, T., Pedersen, C. B. W., & Sigmund, O. (2000) · Structural and Multidisciplinary Optimization · doi:10.1007/s001580050089 · Cited by 517
Manufacturing tolerant topology optimization
Sigmund, O. (2009) · Acta Mechanica Sinica · doi:10.1007/s10409-009-0240-z · Cited by 428
Computer-Aided Design for Additive Manufacturing of Cellular Structures
Rosen, D. W. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738493 · Cited by 376
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
Design of manufacturable 3D extremal elastic microstructure
Andreassen, E., Lazarov, B. S., & Sigmund, O. (2014) · Mechanics of Materials · doi:10.1016/j.mechmat.2013.09.018 · Cited by 340
Design for Additive Manufacturing of Cellular Structures
Chu, C., Graf, G., & Rosen, D. W. (2008) · Computer-Aided Design and Applications · doi:10.3722/cadaps.2008.686-696 · Cited by 300
Yin, L., & Ananthasuresh, G. K. (2001) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-001-0165-z · Cited by 290
Robust topology optimization accounting for spatially varying manufacturing errors
Schevenels, M., Lazarov, B. S., & Sigmund, O. (2011) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2011.08.006 · Cited by 286
Topology optimization with multiple phase projection
Guest, J. K. (2009) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2009.09.023 · Cited by 217
Self-citationEliminating beta-continuation from Heaviside projection and density filter algorithms
Guest, J. K., Asadpoure, A., & Ha, S. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-011-0676-1 · Cited by 197
Self-citationA new level set method for systematic design of hinge-free compliant mechanisms
Luo, J., Luo, Z., Chen, S., Tong, L., & Wang, M. Y. (2008) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2008.08.003 · Cited by 136
Challis, V. J., Roberts, A. P., Grotowski, J. F., Zhang, L., & Sercombe, T. B. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000154 · Cited by 134
A Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures
Wang, H., Chen, Y., & Rosen, D. W. (2005) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2005-85366 · Cited by 117
Amir, O., & Sigmund, O. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0817-1 · Cited by 116
Robust topology optimization accounting for misplacement of material
Jansen, M., Lombaert, G., Diehl, M., et al. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0835-z · Cited by 84
Biomimetic Robotic Mechanisms via Shape Deposition Manufacturing
Bailey, S. A., Cham, J. G., Cutkosky, M. R., & Full, R. J. (2000) · Springer eBooks · doi:10.1007/978-1-4471-0765-1_49 · Cited by 82
Deuser, B. K., Tang, L., Landers, R. G., Leu, M. C., & Hilmas, G. E. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4024534 · Cited by 47
Design and freeform fabrication of deployable structures with lattice skins
Maheshwaraa, U., Bourell, D. L., & Seepersad, C. C. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776160 · Cited by 39
Representation of heterogeneous objects during design, processing and freeform-fabrication
Rajagopalan, S., Goldman, R. E., Shin, K.-H., Kumar, V., Cutkosky, M. R., & Dutta, D. (2001) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(00)00065-0 · Cited by 23
Design Automation for Multi-Material Printing
Hiller, J. D., & Lipson, H. (2009) · doi:10.26153/tsw/15107 · Cited by 11
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Self-citationDesign for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Self-citationPlocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Metadata
- Authors
- Gaynor, A. T., Meisel, N. A., Williams, C. B., & Guest, J. K.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 2014-10-24
- Volume
- 136
- Issue
- 6
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W1983413949
- Cited by
- 271
- References
- 27
- FWCI
- 35.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.