The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors
Abstract
The objective of this work is to identify failure modes and detect the onset of process anomalies in additive manufacturing (AM) processes, specifically focusing on fused filament fabrication (FFF). We accomplish this objective using advanced Bayesian nonparametric analysis of in situ heterogeneous sensor data. Experiments are conducted on a desktop FFF machine instrumented with a heterogeneous sensor array including thermocouples, accelerometers, an infrared (IR) temperature sensor, and a real-time miniature video borescope. FFF process failures are detected online using the nonparametric Bayesian Dirichlet process (DP) mixture model and evidence theory (ET) based on the experimentally acquired sensor data. This sensor data-driven defect detection approach facilitates real-time identification and correction of FFF process drifts with an accuracy and precision approaching 85% (average F-score). In comparison, the F-score from existing approaches, such as probabilistic neural networks (PNN), naïve Bayesian clustering, support vector machines (SVM), and quadratic discriminant analysis (QDA), was in the range of 55–75%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
Maximum Likelihood from Incomplete Data Via the EM Algorithm
Dempster, A. P., Laird, N. M., & Rubin, D. B. (1977) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/j.2517-6161.1977.tb01600.x · Cited by 50,444
A logical calculus of the ideas immanent in nervous activity
McCulloch, W. S., & Pitts, W. (1943) · The Bulletin of Mathematical Biophysics · doi:10.1007/bf02478259 · Cited by 18,566
A Mathematical Theory of Evidence
Shafer, G. (2020) · Princeton University Press eBooks · doi:10.2307/j.ctv10vm1qb · Cited by 11,711
Evaluation: from precision, recall and F-measure to ROC, informedness, markedness and correlation
Powers, D. M. W. (2020) · arXiv · doi:10.48550/arxiv.2010.16061 · Cited by 5,440
Hagan, M., Demuth, H. B., Beale, M. H., & Jes?s, O. D. (2016) · Institutional Repository of the National University Open and Distance UNAD (Universidad Nacional Abierta y a Distancia) · Cited by 5,133
Specht, D. F. (1990) · Neural Networks · doi:10.1016/0893-6080(90)90049-q · Cited by 3,762
Klecka, W. (1980) · Sage eBooks · doi:10.4135/9781412983938 · Cited by 3,723
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Estimating Continuous Distributions in Bayesian Classifiers
John, G. H., & Langley, P. (2013) · arXiv (Cornell University) · doi:10.48550/arxiv.1302.4964 · Cited by 2,885
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
The Infinite Gaussian Mixture Model
Rasmussen, C. E. (1999) · Cited by 1,057
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Li, Y., & Gu, D. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.006 · Cited by 824
Critical parameters influencing the quality of prototypes in fused deposition modelling
Anitha, R., Arunachalam, S., & Radhakrishnan, P. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00980-3 · Cited by 733
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Estimating Normal Means with a Dirichlet Process Prior
Escobar, M. D. (1994) · Journal of the American Statistical Association · doi:10.1080/01621459.1994.10476468 · Cited by 565
Basir, O., & Yuan, X. (2005) · Information Fusion · doi:10.1016/j.inffus.2005.07.003 · Cited by 464
Structural quality of parts processed by fused deposition
Agarwala, M. K., Jamalabad, V. R., Langrana, N. A., Safari, A., Whalen, P. J., & Danforth, S. C. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610732034 · Cited by 406
Ferguson, T. S. (1983) · Recent Advances in Statistics · doi:10.1016/b978-0-12-589320-6.50018-6 · Cited by 383
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0556-9 · Cited by 331
Bourell, D. L., Leu, M. C., & Rosen, D. W. (2009) · Cited by 304
Yang, B.-S., & Kim, K. J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.10.010 · Cited by 221
Additive Manufacturing: Status and Opportunities
Scott, J. A., Weber, C. L., Newsome, S., & Wohlers, T. T. (2012) · Cited by 221
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0878-7 · Cited by 199
Assessment of surface quality on textured FDM prototypes
Armillotta, A. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610637255 · Cited by 163
Strategic Implications of Current Trends in Additive Manufacturing
Beyer, C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028599 · Cited by 158
Considerations and selection of optimal orientation for different rapid prototyping systems
Xu, F., Loh, H. T., & Wong, Y. S. (1999) · Rapid Prototyping Journal · doi:10.1108/13552549910267344 · Cited by 148
Error compensation for fused deposition modeling (FDM) machine by correcting slice files
Tong, K., Joshi, S. B., & Lehtihet, E. A. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810841517 · Cited by 140
Lunar Contour Crafting - A Novel Technique for ISRU-Based Habitat Development
Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., & Fiske, M. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-538 · Cited by 138
Huang, Q., Nouri, H., Xu, K., Chen, Y., Sosina, S., & Dasgupta, T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028510 · Cited by 129
Vision-Based Online Process Control in Manufacturing Applications
Cheng, Y., & Jafari, M. A. (2008) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2007.912058 · Cited by 128
Proposal for a Standardized Test Artifact for Additive Manufacturing Machines and Processes
Moylan, S., Slotwinski, J. A., Cooke, A., Jurrens, K. K., & Donmez, M. A. (2012) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15399 · Cited by 109
Hossain, M. S., Espalin, D., Ramos-Grez, J. A., Perez, M. A., & Wicker, R. B. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028538 · Cited by 100
Application of Dempster–Shafer theory in condition monitoring applications: a case study
Parikh, C. R., Pont, M. J., & Jones, N. B. (2001) · Pattern Recognition Letters · doi:10.1016/s0167-8655(01)00014-9 · Cited by 98
Computer aided decision support for fused deposition modeling
Ziemian, C. W., & Crawn, P. M. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395538 · Cited by 83
Dynamic Modeling and Monitoring of Contour Crafting—An Extrusion-Based Layered Manufacturing Process
Bukkapatnam, S., & Clark, B. (2006) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2375137 · Cited by 37
Variability in the Geometric Accuracy of Additively Manufactured Test Parts
Cooke, A., & Soons, J. A. (2010) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15160 · Cited by 31
Cited by
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
Artificial Intelligence in Advanced Manufacturing: Current Status and Future Outlook
Arinez, J. F., Chang, Q., Gao, R. X., Xu, C., & Zhang, J. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047855 · Cited by 584
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.01.004 · Cited by 432
Elahi, M., Afolaranmi, S. O., Martinez Lastra, J. L., & Perez Garcia, J. A. (2023) · Discover Artificial Intelligence · doi:10.1007/s44163-023-00089-x · Cited by 303
Data and knowledge mining with big data towards smart production
Cheng, Y., Chen, K., Sun, H., Zhang, Y., & Tao, F. (2018) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.08.001 · Cited by 275
Metadata
- Authors
- Rao, P. K., Liu, J. (., Roberson, D., Kong, Z. (., & Williams, C.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 2015-09-09
- Volume
- 137
- Issue
- 6
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W2131684499
- Cited by
- 292
- References
- 41
- FWCI
- 21.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.