Enhancing the Structural Performance of Additively Manufactured Objects Through Build Orientation Optimization
The DOI matches its Crossref record.
Abstract
Additively manufactured objects often exhibit directional dependencies in their structure due to the layered nature of the printing process. While this dependency has a significant impact on the object's functional performance, the problem of finding the best build orientation to maximize structural robustness remains largely unsolved. We introduce an optimization algorithm that addresses this issue by identifying the build orientation that maximizes the factor of safety (FS) of an input object under prescribed loading and boundary configurations. First, we conduct a minimal number of physical experiments to characterize the anisotropic material properties. Next, we use a surrogate-based optimization method to determine the build orientation that maximizes the minimum factor safety. The surrogate-based optimization starts with a small number of finite element (FE) solutions corresponding to different build orientations. The initial solutions are progressively improved with the addition of new solutions until the optimum orientation is computed. We demonstrate our method with physical experiments on various test models from different categories. We evaluate the advantages and limitations of our method by comparing the failure characteristics of parts printed in different orientations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
“Therefore, optimizing the build direction has attracted the early attention and effective improvement of mechanical performance (Ulu et al. 2015; Umetani and Schmidt 2013; Liu 2016) has been observed.”
BackgroundRankouhi, B., Javadpour, S., Delfanian, F., & Letcher, T. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0113-2 · Cited by 457
Yao, T., Ye, J., Deng, Z., Zhang, K., Ma, Y., & Ouyang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.107894 · Cited by 311
Gonabadi, H., Yadav, A., & Bull, S. J. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06138-4 · Cited by 256
A statistical method for build orientation determination in additive manufacturing
Zhang, Y., Harik, R., Fadel, G., & Bernard, A. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2018-0102 · Cited by 63
Huang, R., Ulu, E., Kara, L. B., & Whitefoot, K. S. (2017) · Volume 2A: 43rd Design Automation Conference · doi:10.1115/detc2017-67836 · Cited by 22
Self-citation
Metadata
- Authors
- Ulu, E., Korkmaz, E., Yay, K., Burak Ozdoganlar, O., & Burak Kara, L.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 2015-10-12
- Volume
- 137
- Issue
- 11
- ISSN
- 0161-8458 (ISSN-L)
- 1050-0472
- 1528-9001
- OpenAlex
- W2213125418
- Cited by
- 132
- References
- 0
- FWCI
- 12.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.