The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Open accessAbstract
The lattice structure is a type of cellular material with trusslike frames which can be optimized for specific loading conditions. The fabrication of its intricate architecture is restricted by traditional manufacturing technologies. However, additive manufacturing (AM) enables the fabrication of complex structures by aggregation of materials in a layer-by-layer fashion, which has unlocked the potential of lattice structures. In the last decade, lattice structures have received considerable research attention focusing on the design, simulation, and fabrication for AM techniques. And different modeling approaches have been proposed to predict the mechanical performance of lattice structures. This review introduces the aspects of modeling of lattice structures and the correlation between them, summarizes the existing modeling approaches for simulation, and discusses the strength and weakness in different simulation methods. This review also summarizes the characteristics of AM in manufacturing cellular materials and discusses their influence on the modeling of lattice structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
Asymptotic Analysis for Periodic Structures
Bensoussan, A., Lions, J. L., & Papanicolaou, G. (2011) · American Mathematical Society eBooks · doi:10.1090/chel/374 · Cited by 4,523
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,253
The mechanical properties of cellular solids
Ashby, M. F., & Medalist, R. F. M. (1983) · Metallurgical Transactions A · doi:10.1007/bf02645546 · Cited by 1,137
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Multifunctionality of cellular metal systems
Evans, A. G. (1998) · Progress in Materials Science · doi:10.1016/s0079-6425(98)00004-8 · Cited by 695
Arabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.008 · Cited by 463
Compressive behaviour of stainless steel micro-lattice structures
Gümrük, R., & Mines, R. A. W. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.01.006 · Cited by 445
Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
Ahmadi, S. M., Campoli, G., Amin Yavari, S., Sajadi, B., Wauthle, R., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2014) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.02.003 · Cited by 442
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Qiu, C., Yue, S., Adkins, N. J. E., Ward, M., Hassanin, H., Lee, P. D., Withers, P. J., & Attallah, M. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.031 · Cited by 385
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Computer-Aided Design for Additive Manufacturing of Cellular Structures
Rosen, D. W. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738493 · Cited by 376
Yan, C., Hao, L., Hussein, A., Bubb, S. L., Young, P., & Raymont, D. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.12.004 · Cited by 362
Yan, C., Hao, L., Hussein, A., Young, P., Huang, J., & Zhu, W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.063 · Cited by 329
Cellular metal lattices with hollow trusses
Queheillalt, D. T., & Wadley, H. N. G. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.09.024 · Cited by 323
The structural performance of the periodic truss
Hutchinson, R. G., & Fleck, N. (2005) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.10.008 · Cited by 320
Karamooz Ravari, M. R., Kadkhodaei, M., Badrossamay, M., & Rezaei, R. (2014) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2014.08.009 · Cited by 281
Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting
Cansizoglu, O., Harrysson, O. L. A., Cormier, D., West, H., & Mahale, T. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.002 · Cited by 267
Arabnejad, S., & Pasini, D. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.10.003 · Cited by 266
Active cooling by metallic sandwich structures with periodic cores
LU, T., VALDEVIT, L., & EVANS, A. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.03.001 · Cited by 243
Alsalla, H., Hao, L., & Smith, C. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.05.075 · Cited by 207
Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
Åkerfeldt, P., Antti, M., & Pederson, R. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.07.038 · Cited by 196
A survey of the design methods for additive manufacturing to improve functional performance
Tang, Y., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2015-0011 · Cited by 193
Self-citationFinite element modeling concepts and linear analyses of 3D regular open cell structures
Luxner, M. H., Stampfl, J., & Pettermann, H. E. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-5020-y · Cited by 191
Stiffness and strength of tridimensional periodic lattices
Vigliotti, A., & Pasini, D. (2012) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2012.03.018 · Cited by 173
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Tang, Y., Dong, G., Zhou, Q., & Zhao, Y. F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2685643 · Cited by 163
Self-citationMechanical response of cellular solids: Role of cellular topology and microstructural irregularity
Alkhader, M., & Vural, M. (2008) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2008.03.012 · Cited by 158
Naghieh, S., Karamooz-Ravari, M. R., Badrossamay, M., Foroozmehr, E., & Kadkhodaei, M. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.01.031 · Cited by 148
Hernández-Nava, E., Smith, C. J., Derguti, F., Tammas‐Williams, S., Léonard, F., Withers, P. J., Todd, I., & Goodall, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.029 · Cited by 146
Sridharan, N., Gussev, M. N., Seibert, R. L., Parish, C. M., Norfolk, M., Terrani, K. A., & Babu, S. S. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.048 · Cited by 137
Zargarian, A., Esfahanian, M., Kadkhodapour, J., & Ziaei‐Rad, S. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.054 · Cited by 136
Hedayati, R., Sadighi, M., Aghdam, M. M., et al. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.001 · Cited by 132
A micropolar anisotropic constitutive model of cancellous bone from discrete homogenization
Goda, I., Assidi, M., Belouettar, S., & Ganghoffer, J. F. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.07.012 · Cited by 131
Ptochos, E., & Labeas, G. N. (2012) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636212444285 · Cited by 126
de Formanoir, C., Suard, M., Dendievel, R., Martin, G., & Godet, S. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.05.001 · Cited by 124
A Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures
Wang, H., Chen, Y., & Rosen, D. W. (2005) · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · doi:10.1115/detc2005-85366 · Cited by 117
Goda, I., Assidi, M., & Ganghoffer, J. (2013) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-013-0486-z · Cited by 114
Fabrication of computationally designed scaffolds by low temperature 3D printing
Castilho, M. D., Dias, M., Gbureck, U., Gröll, J., Fernandes, P. R., Pires, I., Gouveia, B., Rodrigues, J. M. C., & Vorndran, E. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035012 · Cited by 113
Optimal active cooling performance of metallic sandwich panels with prismatic cores
Valdevit, L., Pantano, A., Stone, H. A., & Evans, A. G. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.03.042 · Cited by 111
Investigating surface roughness of parts produced by SLS process
Sachdeva, A. K., Singh, S., & Sharma, V. S. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4118-z · Cited by 108
Non-stochastic Ti–6Al–4V foam structures with negative Poisson's ratio
Yang, L., Cormier, D., West, H., Harrysson, O. L. A., & Knowlson, K. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.08.053 · Cited by 100
Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting
Sercombe, T. B., Xu, X., Challis, V. J., Green, R., Yue, S., Zhang, Z., & Lee, P. D. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.063 · Cited by 98
Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell
Hedayati, R., Sadighi, M., Aghdam, M. M., et al. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.07.013 · Cited by 94
Cahill, S., Lohfeld, S., & McHugh, P. E. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3693-5 · Cited by 93
On the deformation of aluminum lattice block structures: from struts to structures
Zhou, J., Shrotriya, P., & Soboyejo, W. O. (2003) · Mechanics of Materials · doi:10.1016/j.mechmat.2003.08.007 · Cited by 91
Thermal Applications of Cellular Lattice Structures
Wadley, H. N. G., & Queheillalt, D. T. (2007) · Materials science forum · doi:10.4028/www.scientific.net/msf.539-543.242 · Cited by 90
Fatigue properties of a dental implant produced by electron beam melting ® (EBM)
Jamshidinia, M., Wang, L., Tong, W., Ajlouni, R., & Kovacevic, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.07.013 · Cited by 86
Scaffold Library for Tissue Engineering: A Geometric Evaluation
Chantarapanich, N., Puttawibul, P., Sucharitpwatskul, S., Jeamwatthanachai, P., Inglam, S., & Sitthiseripratip, K. (2012) · Computational and Mathematical Methods in Medicine · doi:10.1155/2012/407805 · Cited by 85
Zhang, P., & To, A. C. (2016) · International Journal of Plasticity · doi:10.1016/j.ijplas.2015.12.012 · Cited by 82
Coelho, P. G., Hollister, S. J., Flanagan, C. L., & Fernandes, P. R. (2015) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2015.01.004 · Cited by 77
Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process
Tang, Y., Zhou, Y., Hoff, T., Garon, M., & Zhao, Y. F. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000084 · Cited by 74
Self-citationShanjani, Y., Hu, Y., Pilliar, R. M., & Toyserkani, E. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.017 · Cited by 73
Towards stiffness prediction of cellular structures made by electron beam melting (EBM)
Suard, M., Lhuissier, P., Dendievel, R., Blandin, J. J., Vignat, F., & Villeneuve, F. (2014) · Powder Metallurgy · doi:10.1179/1743290114y.0000000093 · Cited by 60
A Unit Cell Approach for Lightweight Structure and Compliant Mechanism
Wang, H. V. (2005) · UPT. Syiah Kuala University Library (Syiah Kuala University) · Cited by 60
Ptochos, E., & Labeas, G. N. (2012) · Strain · doi:10.1111/j.1475-1305.2012.00837.x · Cited by 50
Mechanical performance of hollow tetrahedral truss cores
Clough, E. C., Ensberg, J., Eckel, Z. C., Ro, C. J., & Schaedler, T. A. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.04.006 · Cited by 50
Conformal Lattice Structure Design and Fabrication
Nguyen, J., Park, S.-I., Rosen, D. W., Folgar, L., & Williams, J. R. (2012) · doi:10.26153/tsw/15339 · Cited by 48
Park, S.-I., & Rosen, D. W. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.05.006 · Cited by 44
Salonitis, K., Chantzis, D., & Kappatos, V. A. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9528-x · Cited by 39
The effect of surface finish on tensile behavior of additively manufactured tensile bars
Everhart, W., Sawyer, E., Neidt, T. M., Dinardo, J., & Brown, B. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9702-9 · Cited by 36
Reis, F. D., & Ganghoffer, J. (2010) · Cited by 29
Zargarian, A., Esfahanian, M., Kadkhodapour, J., & Ziaei‐Rad, S. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.05.018 · Cited by 28
Mechanical characterisation of additively manufactured material having lattice microstructure
Cuan‐Urquizo, E., Yang, S., & Bhaskar, A. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/74/1/012004 · Cited by 23
Reinhart, G., Teufelhart, S., & Riß, F. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.063 · Cited by 23
Goda, I., Reis, F. D., & Ganghoffer, J. (2016) · Advanced structured materials · doi:10.1007/978-3-319-31721-2_9 · Cited by 13
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Metadata
- Authors
- Dong, G., Tang, Y., & Zhao, Y. F.
- Venue
- Journal of Mechanical Design
- Publisher
- ASME International
- Published
- 2017-08-30
- Volume
- 139
- Issue
- 10
- ISSN
- 0161-8458 (ISSN-L)
- 1050-0472
- 1528-9001
- OpenAlex
- W2738397520
- Cited by
- 337
- References
- 79
- FWCI
- 15.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.