Parameterization and Validation of an Integrated Electro-Thermal Cylindrical LFP Battery Model
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this paper the parameterization of an integrated electro-thermal model for an A123 26650 LiFePO4 battery is presented. The electrical dynamics of the cell are described by an equivalent circuit model. The resistances and capacitances of the equivalent circuit model are identified at different temperatures and SOC’s, for charging and discharging. Functions are chosen to charac-terize the fitted parameters. A two-state thermal model is used to capture the core and surface temperatures of the battery. The electrical model is coupled with the thermal model through heat generation. Parameters of the thermal model are identified us-ing a least squares algorithm. The electro-thermal model is then validated against voltage and surface temperature measurements from a realistic drive cycle experiment. 1
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 2×
“The heat generation Q in the battery cell is defined by the polarization heat from joule heating and energy dissipated in the electrode over-potentials [19].”
BackgroundAccurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427 · cited 1×
“The inclusion of two or more RC pairs in the equivalent circuit model increases the accuracy of the cell voltage dynamic prediction as seen in [7, 9, 11, 25].”
BackgroundSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057 · cited 1×
“There are more complex electrochemical models [1–3] that are highly accurate [4–6], but hard to be fully parameterized [6], and require large computational capacity.”
BackgroundLin, X., Perez, H. E., Siegel, J. B., Stefanopoulou, A. G., Li, Y., Anderson, R. D., Ding, Y., & Castanier, M. P. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2217143 · Cited by 351
Self-citation
Cited by
Lin, X., Perez, H. E., Siegel, J. B., Stefanopoulou, A. G., Li, Y., Anderson, R. D., Ding, Y., & Castanier, M. P. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2217143 · Cited by 351
Self-citationThermal state monitoring of lithium-ion batteries: Progress, challenges, and opportunities
Zheng, Y., Che, Y., Hu, X., Sui, X., Stroe, D.-I., & Teodorescu, R. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101120 · Cited by 273
Su, S., Li, W., Mou, J., Garg, A., Gao, L., & Liu, J. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3204843 · Cited by 136
Grandjean, T. R. B., Groenewald, J., McGordon, A., Widanage, W. D., & Marco, J. (2018) · Batteries · doi:10.3390/batteries4040049 · Cited by 45
Metadata
- Authors
- Perez, H. E., Siegel, J. B., Lin, X., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P.
- Venue
- Volume 3: Renewable Energy Systems; Robotics; Robust Control; Single Track Vehicle Dynamics and Control; Stochastic Models, Control and Algorithms in Robotics; Structure Dynamics and Smart Structures;
- Publisher
- ASME
- Published
- 2012-10-17
- Pages
- 41-50
- OpenAlex
- W2074242433
- Cited by
- 97
- References
- 4
- FWCI
- 5.48
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.