Thermal Analysis of a High-Temperature Heat Pipe-Assisted Thermal Energy Storage System With Nano-Enhanced Phase Change Material
The DOI matches its Crossref record.
Abstract
In this study, the thermal characteristics of a high-temperature latent heat thermal energy storage system assisted by highly conductive nanoparticles and finned heat pipes are investigated numerically. A transient two-dimensional model is developed using the commercial CFD package of ANSYS-FLUENT18.2 to analyze the thermal performance of the storage unit during the charging process. Copper oxide (CuO) and aluminum oxide (Al2O3) are the nanoparticles introduced to enhance the thermal conductivity of the phase change material (PCM) which is potassium nitrate (KNO3) with melting temperature of 335°C. The effects of different types and volume fractions of nanoparticles, as well as the quantities of embedded heat pipes have been studied. The results revealed that increasing the volume fraction of nanoparticles leads to the increase of the melting rate and input heat flux of the system. It was also found that the dispersion of aluminum oxide in the PCM provides a faster charging process in comparison to the case with copper oxide nanoparticles. In addition, the results showed that the quantity of heat pipes has a significant impact on the thermal performance of the storage unit.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“An increased number of heat pipes led to shorter melting times.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [84]
In the citing paper
“The enhancement above 5% NPs was insignificant, while increased viscosity decreased performance.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [84]
In the citing paper
“Melting began faster with the Cu particles, and increasing the amount greatly sped up the melting process and reduced the total melting times.”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [84]
In the citing paper
“In comparison, the aluminum oxide particles had only a slightly higher melting rate than the Cu particles, which was insignificant [84].”
From Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review (2021) · cites this paper as [84]
Citations
Cites
Still being checked.
Cited by
Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review
Tofani, K., & Tiari, S. (2021) · Energies · doi:10.3390/en14133821 · Cited by 114
“In comparison, the aluminum oxide particles had only a slightly higher melting rate than the Cu particles, which was insignificant [84].”
BackgroundInfluentialSelf-citationMahdavi, M., Tiari, S., & Pawar, V. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101086 · Cited by 87
Self-citationSystematic review on the use of heat pipes in latent heat thermal energy storage tanks
Maldonado, J. M., de Gracia, Á., & Cabeza, L. F. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101733 · Cited by 66
Tiari, S., & Mahdavi, M. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09357-9 · Cited by 47
“Additional information about the numerical procedure can be found in authors’ previously published studies [42, 43].”
ResultSelf-citationA review of phase change materials and heat enhancement methodologies
Saqib, M., & Andrzejczyk, R. (2022) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.467 · Cited by 54
Metadata
- Authors
- Tiari, S., Mahdavi, M., Thakore, V., & Joseph, S.
- Affiliations
- Gannon University (US)
- Venue
- Volume 6B: Energy
- Published
- 2018-11-09
- OpenAlex
- W2910843954
- Cited by
- 9
- References
- 0
- Citations by year
- 2025: 1 · 2022: 1 · 2021: 2 · 2020: 4 · 2019: 1
- FWCI
- 4.73
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- ASME International Mechanical Engineering Congress and Exposition (IMECE) (publishedVersion)
- Funders
- Gannon University
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- latent heat storage, heat pipes, nano-enhanced phase change materials, potassium nitrate, copper oxide nanoparticles, Al2O3 nanoparticles, nanoparticle volume fraction, melting rate, charging process, finned heat pipes, high-temperature thermal energy storage, thermal conductivity enhancement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal Analysis of a High-Temperature Heat Pipe-Assisted Thermal Energy Storage System With Nano-Enhanced Phase Change Material. https://app.cochat.ai/papers/10.1115/imece2018-86481
- The paper
- Tiari, S., Mahdavi, M., Thakore, V., & Joseph, S. (2018). Thermal Analysis of a High-Temperature Heat Pipe-Assisted Thermal Energy Storage System With Nano-Enhanced Phase Change Material. Volume 6B: Energy. https://doi.org/10.1115/imece2018-86481
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.