Plasma etching of proton-exchanged lithium niobate
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Plasma etching of lithium niobate with fluorine gases is limited by the redeposition LiF. This results in a low etch rate and nonvertically etched walls. Etching of proton-exchanged lithium niobate can prevent the LiF deposition to a large extent because of the greatly reduced lithium concentration in lithium niobate. We performed different inductively coupled plasma etching processes using SF6 or CHF3∕Ar on proton-exchanged lithium niobate. Negligible underetching and nearly vertically etched walls on proton-exchanged lithium niobate samples were obtained by CHF3∕Ar gas at chamber pressure of 6mTorr and 130V dc bias.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Fluorine-based reactive-ion etching (RIE) can remove LN effectively by forming volatile, fluorinated niobium (Nb) species [77].However, it forms lithium fluoride (LiF), which is non-volatile, and result in severe redeposition problems [78].”
From Integrated photonics on thin-film lithium niobate (2021) · cites this paper as [77]
Citations
Cites
Plasma etching : an introduction
Manos, D. M., & Flamm, D. L. (1989) · Cited by 496
Growth of crystalline LiF on CF4 plasma etched LiNbO3 substrates
Nagata, H., Mitsugi, N., Shima, K., Tamai, M., & Haga, E. M. (1998) · Journal of Crystal Growth · doi:10.1016/s0022-0248(98)00009-8 · Cited by 36
Sohler, W. (1989) · Thin Solid Films · doi:10.1016/0040-6090(89)90827-4 · Cited by 25
Self-citationMitsugi, N., Nagata, H., Shima, K., & Tamai, M. (1998) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.581334 · Cited by 19
The SOI planar photonic crystal fabrication: patterning of Cr using Cl2/O2 plasma etching
Milenin, A. P., Jamois, C., Wehrspohn, R. B., & Reiche, M. (2004) · Microelectronic Engineering · doi:10.1016/j.mee.2004.10.001 · Cited by 18
Self-citationEtching characteristics of LiNbO3 crystal by fluorine gas plasma reactive ion etching
Tamura, M., & Yoshikado, S. (2003) · Surface and Coatings Technology · doi:10.1016/s0257-8972(03)00070-7 · Cited by 15
Self-ordered sub-micron structures in Fe-doped LiNbO3 formed by light-induced frustration of etching
Scott, J. G., Boyland, A. J., Mailis, S., Grivas, C., Wagner, O., Lagoutte, S., & Eason, R. W. (2004) · Applied Surface Science · doi:10.1016/j.apsusc.2004.02.027 · Cited by 12
Fabrication of band-gap structures in planar nonlinear waveguides for second harmonic generation
Foglietti, V., Cianci, E., Pezzetta, D., Sibilia, C., Marangoni, M., Osellame, R., & Ramponi, R. (2003) · Microelectronic Engineering · doi:10.1016/s0167-9317(03)00176-x · Cited by 9
H–Li correlation and stoichiometry of mixed phases in proton-exchanged LiNbO3 waveguides
Espeso, O., Garcia, Y. Z., Climent, A., Agulló-López, F., de la Paliza, G., Cabrera, J. M., & Sajavaara, T. (2003) · Journal of Applied Physics · doi:10.1063/1.1626802 · Cited by 8
Research works printed but not linked: 2
- 2003, Surf. Coat. Technol., 169–170, 203
- 2003, Microelectron. Eng., 67–68, 742
Cited by
Integrated photonics on thin-film lithium niobate
Zhu, D., Shao, L., Yu, M., Cheng, R., Desiatov, B., Xin, C. J., Hu, Y., Holzgrafe, J., Ghosh, S., Shams-Ansari, A., et al. (2021) · Advances in Optics and Photonics · doi:10.1364/aop.411024 · Cited by 1,516
Status and Potential of Lithium Niobate on Insulator (LNOI) for Photonic Integrated Circuits
Boes, A., Corcoran, B., Chang, L., Bowers, J., & Mitchell, A. (2018) · Laser & Photonics Reviews · doi:10.1002/lpor.201700256 · Cited by 700
Advances in on-chip photonic devices based on lithium niobate on insulator
Lin, J., Bo, F., Cheng, Y., & Xu, J. (2020) · Photonics Research · doi:10.1364/prj.395305 · Cited by 377
“Another alternative solution for reducing the LiF redeposition is adding Ar gas in fluorine gases to physically bombard the target and enhance the sputtering process during etching [92,94,99] and using pure Ar gas without fluorine gases to avoid the LiF redeposition [30,98].”
BackgroundOptical waveguides in lithium niobate: Recent developments and applications
Bazzan, M., & Sada, C. (2015) · Applied Physics Reviews · doi:10.1063/1.4931601 · Cited by 290
Ultra-low loss photonic circuits in lithium niobate on insulator
Krasnokutska, I., Tambasco, J.-L. J., Li, X., & Peruzzo, A. (2018) · Optics Express · doi:10.1364/oe.26.000897 · Cited by 180
Micro‐structured integrated electro‐optic LiNbO3modulators
Janner, D., Tulli, D., García‐Granda, M., Belmonte, M., & Pruneri, V. (2009) · Laser & Photonics Reviews · doi:10.1002/lpor.200810073 · Cited by 164
Ultra-low loss photonic circuits in lithium niobate on insulator
Krasnokutska, I., Tambasco, J.-L., (8558871), G. L., & Peruzzo, A. (2024) · Figshare · Cited by 157
Lithium Niobate Ridge Waveguides Fabricated by Wet Etching
Hu, H., Ricken, R., Sohler, W., & Wehrspohn, R. B. (2007) · IEEE Photonics Technology Letters · doi:10.1109/lpt.2007.892886 · Cited by 125
“titanium (Ti)-indiffusion or proton exchange for waveguide formation [3], [4].”
BackgroundSelf-citationLow loss ridge waveguides in lithium niobate thin films by optical grade diamond blade dicing
Volk, M. F., Suntsov, S., Rüter, C. E., & Kip, D. (2016) · Optics Express · doi:10.1364/oe.24.001386 · Cited by 97
High aspect ratio lithium niobate ridge waveguides fabricated by optical grade dicing
Courjal, N., Guichardaz, B., Ulliac, G., Rauch, J.-Y., Sadani, B., Lu, H.-H., & Bernal, M.-P. (2011) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/44/30/305101 · Cited by 96
Etching characteristics of LiNbO3 in reactive ion etching and inductively coupled plasma
Ren, Z., Heard, P. J., Marshall, J. M., Thomas, P. A., & Yu, S. (2008) · Journal of Applied Physics · doi:10.1063/1.2838180 · Cited by 77
Emerging heterogeneous integrated photonic platforms on silicon
Fathpour, S. (2014) · Nanophotonics · doi:10.1515/nanoph-2014-0024 · Cited by 74
Modal phase matched lithium niobate nanocircuits for integrated nonlinear photonics
Chen, J.-Y., Sua, Y. M., Fan, H., & Huang, Y.-P. (2018) · OSA Continuum · doi:10.1364/osac.1.000229 · Cited by 73
Takigawa, R., Higurashi, E., Kawanishi, T., & Asano, T. (2014) · Optics Express · doi:10.1364/oe.22.027733 · Cited by 54
Highly selective electroplated nickel mask for lithium niobate dry etching
Benchabane, S., Robert, L., Rauch, J., Khelif, A., & Laude, V. (2009) · Journal of Applied Physics · doi:10.1063/1.3125315 · Cited by 51
Advances in fabrication of micro-optical components by femtosecond laser with etching technology
Zheng, J., Tian, K., Qi, J., Guo, M., & Liu, X. (2023) · Optics & Laser Technology · doi:10.1016/j.optlastec.2023.109793 · Cited by 50
Suspended slab and photonic crystal waveguides in lithium niobate
Si, G., Teo, E. J., Bettiol, A. A., Teng, J., & Danner, A. J. (2010) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.3327925 · Cited by 43
Hartung, H., Kley, E. ‐., Tünnermann, A., Gischkat, T., Schrempel, F., & Wesch, W. (2008) · Optics Letters · doi:10.1364/ol.33.002320 · Cited by 35
Fabrication of lithium niobate metasurfaces via a combination of FIB and ICP-RIE
Jin, C., Wu, W., Cao, L., Gao, B., Chen, J., Cai, W., Ren, M., & Xu, J. (2022) · Chinese Optics Letters · doi:10.3788/col202220.113602 · Cited by 37
“, nickel([31,32]), chromium (Cr)([33,34]), silicon([35,36]), or SiO2 ([37,38])].”
Deep anisotropic LiNbO3 etching with SF6/Ar inductively coupled plasmas
Deng, J., Wei, J., Png, C. E., Si, G., Son, J., Yang, H., & Danner, A. J. (2012) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.3674282 · Cited by 34
Ulliac, G., Courjal, N., Chong, H. M. H., & Rue, R. M. D. L. (2008) · Optical Materials · doi:10.1016/j.optmat.2008.03.004 · Cited by 26
Second‐Harmonic Generation in Integrated Photonics on Silicon
Rao, A., & Fathpour, S. (2017) · physica status solidi (a) · doi:10.1002/pssa.201700684 · Cited by 30
Козлов, А. А., Moskalev, D. N., Salgaeva, U. O., Bulatova, A. V., Krishtop, V. V., Volyntsev, A., & Syuy, A. V. (2023) · Applied Sciences · doi:10.3390/app13042097 · Cited by 24
“The formation of LiF on the surface results in a significant decrease in the etching rate, a reduction in the aspect ratio of microstructures and an increase in the surface roughness [20].”
Strong reduction of propagation losses in LiNbO3 ridge waveguides
Gerthoffer, A., Guyot, C., Qiu, W., Ndao, A., Bernal, M.-P., & Courjal, N. (2014) · Optical Materials · doi:10.1016/j.optmat.2014.09.027 · Cited by 23
“Other approaches based on direct plasma etching techniques [9,10] cannot yield depths larger than 5 lm without a severe deterioration of the roughness.”
BackgroundAryal, A., Stricklin, I., Behzadirad, M., Branch, D. W., Siddiqui, A. M., & Busani, T. L. (2022) · Nanomaterials · doi:10.3390/nano12162836 · Cited by 23
“[20]), with minimum backside cooling of 10 sscm He flow.”
Large-area regular nanodomain patterning in He-irradiated lithium niobate crystals
Ofan, A., Lilienblum, M., Gaathon, O., Sehrbrock, A., Hoffmann, Á., Bakhru, S., Bakhru, H., Irsen, S. H., Osgood, R. M., & Soergel, E. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/28/285309 · Cited by 21
Etching of Lithium Niobate: From Ridge Waveguides to Photonic Crystal Structures
Huang, H., Ricken, R., & Sohler, W. (2008) · Cited by 21
Self-citationLiNbO3 acousto-optical and electro-optical micromodulators
Courjal, N., Bernal, M.-P., Ulliac, G., Dahdah, J., Benchabane, S., & Mérolla, J.-M. (2009) · Journal of the European Optical Society Rapid Publications · doi:10.2971/jeos.2009.09018 · Cited by 21
“The key fabrication step is the etching of the PhCs.”
MethodInfluentialRib waveguides based on Zn-substituted LiNbO3 films grown by liquid phase epitaxy
Dubs, C., Ruske, J.-P., Kräußlich, J., & Tünnermann, A. (2009) · Optical Materials · doi:10.1016/j.optmat.2009.03.018 · Cited by 19
The effect of a lithium niobate heating on the etching rate in SF6 ICP plasma
Osipov, A. A., Alexandrov, S., & Iankevich, G. A. (2018) · Materials Research Express · doi:10.1088/2053-1591/aafa9d · Cited by 19
Butt, M. A., Solé, R. M., Pujol, M. C., Ródenas, A., Lifante, G., Choudhary, A., Murugan, G. S., Shepherd, D. P., Wilkinson, J. S., Aguiló, M., et al. (2014) · Journal of Lightwave Technology · doi:10.1109/jlt.2014.2379091 · Cited by 18
“7 nm/min; this etch rate is larger than previously reported for standard RIE of LiNbO3 (around 4 nm/min) [23], although we note that the etching rate of LiNbO3 can be increased after proton exchange to values of 10 nm/min [24].”
BackgroundLithium Niobate Ridge Waveguides Fabricated by Ion Implantation Followed by Ion Beam Etching
Zhao, J.-H., Liu, X., Huang, Q., Liu, P., & Wang, X. (2010) · Journal of Lightwave Technology · doi:10.1109/jlt.2010.2050296 · Cited by 18
“[7]‐[ 10 ]. Dry etching comprises many methods.”
BackgroundMethodAdvances in nonlinear photonic devices based on lithium niobate waveguides
Wang, Z., Wang, C., & Yu, H. (2023) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/acb4a4 · Cited by 17
“Thirdly, etching of LN materials, via processes including reactive ion etching (RIE) [77–83], Ar ion milling [38, 84], and focused ion beam (FIB) milling [13, 85], is conducted to fabricate the optical waveguide structure.”
Ai, L., Wang, L., Tan, Y., Akhmadaliev, S., Zhou, S., & Chen, F. (2016) · Journal of Lightwave Technology · doi:10.1109/jlt.2016.2638920 · Cited by 13
“beam milling, reactive ion etching, focused ion beam etching and wet etching, have been utilized to produce ridges and more complicated integrated structures on LiNbO3 plates [3], [20], [24]–[28].”
MethodDeep Etching of LiNbO3 Using Inductively Coupled Plasma in SF6-Based Gas Mixture
Osipov, A. A., Osipov, A. A., Iankevich, G. A., Speshilova, A. B., Shakhmin, A. L., Berezenko, V. I., & Alexandrov, S. (2020) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2020.3039350 · Cited by 12
“However, the main problem in the formation of deep structures (more than 10 μm) is the generation of a non-volatile LiF compound on the etching surface, which slows down the plasma chemical etching (PCE) process, and with increasing process time can lead to a complete stop of the etching process [24].”
BackgroundZhang, J., Xü, W.-J., Carlier, J., Ji, X., Queste, S., Nongaillard, B., & Huang, Y. (2011) · Ultrasonics · doi:10.1016/j.ultras.2011.08.006 · Cited by 11
“Recently, The FEMTO-ST lab and Wehrspohn’s group have made a lot of progress in deep etching Xcut, Z-cut, Y-cut and 128 /Y-cut LiNbO3 crystals [16,17].”
MethodLiNbO3 acousto-optical and electro-optical micromodulators
Courjal, N., Bernal, M.-P., Ulliac, G., & Benchabane, S. (2008) · HAL · Cited by 11
Yavuzçetin, Ö., Ozturk, B., Xiao, D., & Sridhar, S. (2011) · Optical Materials Express · doi:10.1364/ome.1.001262 · Cited by 9
Optical diagnostic of LiNbO3 etching in NF3/Ar ICP plasma: Part I
Osipov, A. A., Alexandrov, S., Berezenko, V. I., Speshilova, A. B., Vorobyev, A., & Osipov, A. A. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.113146 · Cited by 9
Demonstration of ultraprecision ductile-mode cutting for lithium niobate microring waveguides
Takigawa, R., Higurashi, E., Kawanishi, T., & Asano, T. (2016) · Japanese Journal of Applied Physics · doi:10.7567/jjap.55.110304 · Cited by 8
DRIE of non-conventional materials: first results
Queste, S., Ulliac, G., Jeannot, J. C., & Malek, C. K. (2008) · HAL · Cited by 8
Chen, I. I., Solgaard, J., Sekine, R., Hossain, A. A., Ardizzi, A. J., Catherall, D. S., Marandi, A., Renzas, R., Greer, F., & Minnich, A. J. (2024) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/6.0003962 · Cited by 9
Shen, B., Tan, X., Wang, C., Fan, H., Hu, D., Sun, J., Jiang, J. F., & Jiang, A. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c11445 · Cited by 7
Yavuzçetin, Ö., Novikov, H. P., Dally, R. L., Malley, S. T., Perry, N. R., Ozturk, B., & Sridhar, S. (2012) · Journal of Applied Physics · doi:10.1063/1.4756958 · Cited by 7
Fabrication of Bragg gratings with deep grooves in LiNbO3 ridge optical waveguide
Suzuki, A., Iwamoto, T., Enokihara, A., Murata, H., & Okamura, Y. (2008) · Microelectronic Engineering · doi:10.1016/j.mee.2007.12.076 · Cited by 7
Tsuchiya, T., Sugano, K., Takahashi, H., Seo, H., Pihosh, Y., Kazoe, Y., Mawatari, K., Kitamori, T., & Tabata, O. (2017) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2017.7994281 · Cited by 6
“Though plasma etching [5], laser aberration [4] and ultraprecision ductile-mode cutting [6] have been developed to make microscale channels on LN wafers, there has been no report on fabricating nanoscale channel smaller than 1 μm square in cross section.”
MethodSurface Etching of MgO:LiNbO[sub 3] Crystal by Ti Metal for Integrated Optics
Zhang, D., Zhang, P., Zhou, H.-J., Cui, Y., & Pun, E. Y. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3458861 · Cited by 6
Investigation of the physical origins of etching LiNbO3 during Ti in-diffusion
Sivan, V. P., Holland, A. S., O'Mullane, A. P., & Mitchell, A. (2010) · Applied Physics Letters · doi:10.1063/1.3367742 · Cited by 6
Meetei, T. S., Lee, Y.-T., & Yu, N.-E. (2025) · Optics Letters · doi:10.1364/ol.553184 · Cited by 5
Meetei, T. S., Son, S.-J., Park, B., Lee, Y.-T., & Yu, N. E. (2023) · Journal of Optics · doi:10.1088/2040-8986/acb44b · Cited by 5
“ation issues induced by lithium diffusion or etching residues (LN redeposition) [5, 22, 23].”
Hao, 姚. Y., Mengke, 王. W., Jiayao, 邓. D., Yuzhe, 孙. S., Jieyun, 吴. W., & Kaixin, 陈. C. (2024) · Laser & Optoelectronics Progress · doi:10.3788/lop240460 · Cited by 5
Fabrication of Bragg Gratings on LiNbO3 optical waveguides
Ulliac, G., Lecestre, A., Guichardaz, B., Dahdah, J., Baida, F., Bernal, M.-P., & Courjal, N. (2012) · Microelectronic Engineering · doi:10.1016/j.mee.2012.02.024 · Cited by 5
OES diagnostic of SF6/Ar gas mixture of ICP discharges for LiNbO3 etching
Osipov, A. A., Osipov, A. A., Berezenko, V. I., & Alexandrov, S. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/919/2/022018 · Cited by 5
Reactive ion etching of Ti-diffused LiNbO3slab waveguides
Wu, J., Li, J., Yao, Y., & Qi, Z. (2013) · Journal of Semiconductors · doi:10.1088/1674-4926/34/8/086001 · Cited by 5
Nayeri, H. D., Asadi, R., & Malekmohammad, M. (2016) · Journal of Nanophotonics · doi:10.1117/1.jnp.10.036016 · Cited by 4
Micro-Structuring and Ferroelectric Domain Engineering of Single Crystal Lithium Niobate
Mailis, S., Sones, C. L., & Eason, R. W. (2008) · Springer series in materials science · doi:10.1007/978-3-540-77965-0_1 · Cited by 4
Yonghui, 田. T., Mingrui, 袁. Y., Shijing, 秦. Q., Hao, 李. L., Sixuan, 王. W., & Huifu, 肖. X. (2024) · Laser & Optoelectronics Progress · doi:10.3788/lop240525 · Cited by 3
Kim, H., Kim, G., Slusar, T., Kim, J., Park, J., Park, J., Hwang, H., Noh, W., Lee, H., Seo, M., et al. (2024) · ETRI Journal · doi:10.4218/etrij.2024-0137 · Cited by 3
“Among the dry etching techniques, focused ion beam (FIB) milling [17, 18], fluorine-based RIE [19, 20], and argon-based ICP-RIE (argon ion milling) [8, 21 – 23] have been used to etch LNOI [1, 24].”
Lithium Niobate (LiNbO3) Waveguides for Electromagnetic Pulse (EMP) Sensing
Waddie, A. J., Dzipalski, A., Thurston, I., Moutrie, M. J., & Taghizadeh, M. R. (2016) · IEEE Sensors Journal · doi:10.1109/jsen.2016.2569820 · Cited by 3
“Doping processes, using either titanium n-diffusion (TI) or annealled proton exchange (PX), have been u sed to create both planar and channel waveguides [6].”
BackgroundFabrication of freestanding LiNbO3 thin films via He implantation and femtosecond laser ablation
Gaathon, O., Ofan, A., Dadap, J. I., Vanamurthy, L. H., Bakhru, S., Bakhru, H., & Osgood, R. M. (2010) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.3384056 · Cited by 3
Micro-Structuring and Ferroelectric Domain Engineering of Single Crystal Lithium Niobate
Mailis, S., Sones, C. L., & Eason, R. W. (2013) · Springer series in materials science · doi:10.1007/978-3-642-41086-4_1 · Cited by 3
INVESTIGATION OF NANOSCALE ETCHING AND POLING OF LITHIUM NIOBATE
Smith, S. E. (2014) · Montana State University ScholarWorks (Montana State University) · Cited by 3
Laser-assisted fabrication of new slab-coupled lithium niobate optical waveguide
Lü, Y., & Knize, R. J. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.035 · Cited by 2
NANOSCALE ARRAYS IN LITHIUM NIOBATE FABRICATED BY INTERFERENCE LITHOGRAPHY AND DRY ETCHING
Si, G. Y., Danner, A. J., Teng, J., Ang, S. S., Chew, A. B., & Dogheche, E. H. (2010) · International Journal of Nanoscience · doi:10.1142/s0219581x10006867 · Cited by 2
Lithium niobate surface structuration for phononic crystal fabrication
Benchabane, S., Robert, L., Ulliac, G., Queste, S., Khelif, A., & Laude, V. (2008) · Proceedings/Proceedings - IEEE Ultrasonics Symposium · doi:10.1109/ultsym.2008.0545 · Cited by 2
Zhang, J., Xü, W.-J., Carlier, J., Ji, X., Nongaillard, B., Queste, S., Zhou, J. H., & Huang, Y. P. (2011) · IEEE International Ultrasonics Symposium · doi:10.1109/ultsym.2011.0431 · Cited by 2
All-Optical Signal Processing Devices with (Periodically Poled) Lithium Niobate Waveguides
Sohler, W., Grundkötter, W., Herrmann, H., Hu, H., Jansen, S. L., Lee, J. H., Min, Y. H., Quiring, V., Ricken, R., Reza, S., et al. (2007) · Optical Fiber Communication Conference · doi:10.1109/ofc.2007.4348549 · Cited by 2
Self-citationPhotonic Bandgap Properties of Lithium Niobate
Courjal, N., Baida, F., Bernal, M.-P., Dahdah, J., Guyot, C., Lu, H., Sadani, B., & Ulliac, G. (2013) · Springer series in materials science · doi:10.1007/978-3-642-41086-4_12 · Cited by 1
Sub-Micron Structuring of LiNbO3 Crystals with Multi-Period and Complex Geometries
Grilli, S., & Ferraro, P. (2008) · Springer series in materials science · doi:10.1007/978-3-540-77965-0_3
Photonic crystals in lithium niobate by ion-beam enhanced etching
Hartung, H., Geiß, R., Gischkat, T., Schrempel, F., Iliew, R., Pertsch, T., Lederer, F., Wesch, W., Kley, E., & Tünnermann, A. (2009) · IEEE/LEOS Winter Topicals Meeting Series (WTM) · doi:10.1109/leoswt.2009.4771656
“In recent years PC structures in LiNbO3 fabricated e.g. by means of sputtering with focused ion-beam (FIB) [5] and inductively coupled plasma-reactive ion etching (ICP-RIE) [6] have been reported.”
MethodKomizunai, S., Oikawa, K., Saito, Y., Takahashi, K., & Ando, A. (2014) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.01aa08
A LiNbO3 ultrasonic phased array transducer of more than 100 MHz
Xü, W.-J., Jib, X. M., Zhang, J., Carlier, J., Nongaillard, B., Queste, S., Huang, Y., & Piwakowski, B. (2012) · AIP conference proceedings · doi:10.1063/1.3703273
Investigation of fabricating a LiNbO3 ultrasonic phased array transducer of more than 100 MHz
Zhang, J., Xü, W.-J., Carlier, J., Ji, X., Nongaillard, B., Queste, S., & Huang, Y. (2011) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2011.6126901
Radiation Losses of Photonic Crystal Waveguides in LiNbO3 Membranes
Geiß, R., Hartung, H., Iliew, R., Gischkat, T., Schrempel, F., Setzpfandt, F., Pertsch, T., Kley, E., Lederer, F., Wesch, W., et al. (2009) · Advances in Optical Sciences Congress · doi:10.1364/nlo.2009.nmd2
Microfabrication of lead-free (K, Na)NbO3 piezoelectric thin films by dry etching
Kurokawa, F., Yokokawa, R., Kotera, H., Horikiri, F., Shibata, K., Sato, M., Hida, H., & Kanno, I. (2013) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2013.6626951
“LN is a similar perovskite niobate like KNN, and it is reported that LN can be microfabricated with fluorine-based plasma etching such as CF4, SF6 or CHF3/Ar plasma [8, 9].”
MethodFabrication of high aspect ratio photonic crystal structures in lithium niobate
Hartung, H., Kley, E. ‐., Tünnermann, A., Gischkat, T., & Schrempel, F. (2007) · Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) · doi:10.1109/cleoe-iqec.2007.4386206
Sub-Micron Structuring of LiNbO3 Crystals with Multi-Period and Complex Geometries
Grilli, S., & Ferraro, P. (2013) · Springer series in materials science · doi:10.1007/978-3-642-41086-4_3
OES diagnostics of NF3/Xe plasma for deep structures in LiNbO3
Osipov, A. A., Gagaeva, A. E., Speshilova, A. B., Osipov, A. A., & Alexandrov, S. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2388/1/012081
Chong, J. L., Kopf, R. F., Kaufman, J., Xu, C., Cappuzzo, M. A., Tate, A., Hu, T.-C., & Earnshaw, M. P. (2025) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/6.0004440
Metadata
- Authors
- Hu, H., Milenin, A. P., Wehrspohn, R. B., Hermann, H., & Sohler, W.
- Affiliations
- Paderborn University (DE)
- Max Planck Institute of Microstructure Physics (DE)
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 2006-06-09
- Volume
- 24
- Issue
- 4
- Pages
- 1012-1015
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2131031908
- Cited by
- 79
- References
- 9
- Citations by year
- 2025: 2 · 2024: 5 · 2023: 5 · 2022: 3 · 2021: 2 · 2020: 3 · 2018: 4 · 2017: 2 · 2016: 5 · 2015: 1 · 2014: 6 · 2013: 5 · 2012: 4
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Vacuum Science & Technology A Vacuum Surfaces and Films (publishedVersion)
- Max Planck Institute for Plasma Physics (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-Pressure Plasma Processing and Diagnostics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- plasma etching, proton-exchanged lithium niobate, inductively coupled plasma, SF6, vertical etching, underetching, etch rate
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.