Focused-ion beam patterning of organolead trihalide perovskite for subwavelength grating nanophotonic applications
Open accessThe DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
The coherent amplified spontaneous emission and high photoluminescence quantum efficiency of organolead trihalide perovskite have led to research interest in this material for use in photonic devices. In this paper, the authors present a focused-ion beam patterning strategy for methylammonium lead tribromide (MAPbBr3) perovskite crystal for subwavelength grating nanophotonic applications. The essential parameters for milling, such as the number of scan passes, dwell time, ion dose, ion current, ion incident angle, and gas-assisted etching, were experimentally evaluated to determine the sputtering yield of the perovskite. Based on our patterning conditions, the authors observed that the sputtering yield ranged from 0.0302 to 0.0719 μm3/pC for the MAPbBr3 perovskite crystal. Using XeF2 for the focused-ion beam gas-assisted etching, the authors determined that the etching rate was reduced to between 0.40 and 0.97, depending on the ion dose, compared with milling with ions only. Using the optimized patterning parameters, the authors patterned binary and circular subwavelength grating reflectors on the MAPbBr3 perovskite crystal using the focused-ion beam technique. Based on the computed grating structure with around 97% reflectivity, all of the grating dimensions (period, duty cycle, and grating thickness) were patterned with nanoscale precision (>±3 nm), high contrast, and excellent uniformity. Our results provide a platform for utilizing the focused-ion beam technique for fast prototyping of photonic nanostructures or nanodevices on organolead trihalide perovskite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“The achieved lasing threshold of 19.6 µJcm -2 is in the range of the reported values of thin film MAPbI3 lasers [9,29].”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [29]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Self-citationBright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Organohalide lead perovskites for photovoltaic applications
Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00942h · Cited by 1,410
Room-Temperature Near-Infrared High-Q Perovskite Whispering-Gallery Planar Nanolasers
Zhang, Q., Ha, S. T., Liu, X., Sum, T. C., & Xiong, Q. (2014) · Nano Letters · doi:10.1021/nl503057g · Cited by 816
Advancements in perovskite solar cells: photophysics behind the photovoltaics
Sum, T. C., & Mathews, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00673a · Cited by 778
High-contrast gratings for integrated optoelectronics
Chang-Hasnain, C. J., & Yang, W. (2012) · Advances in Optics and Photonics · doi:10.1364/aop.4.000379 · Cited by 556
Research works printed but not linked: 1
- 15. O. Wilhelmi, S. Reyntjens, D. Wall, R. Geurts, C. Jiao, and L. Roussel, International Conference on Micro-and Nano-Engineering, Barcelona (2006).
Cited by
Organic–Inorganic Hybrid Halide Perovskites for Memories, Transistors, and Artificial Synapses
Choi, J., Han, J. S., Hong, K., Kim, S. Y., & Jang, H. W. (2018) · Advanced Materials · doi:10.1002/adma.201704002 · Cited by 314
Fang, Y., Wei, H., Dong, Q., & Huang, J. (2017) · Nature Communications · doi:10.1038/ncomms14417 · Cited by 245
Photonics and Optoelectronics of 2D Metal‐Halide Perovskites
Qi, X., Zhang, Y., Ou, Q., Ha, S. T., Qiu, C., Zhang, H., Cheng, Y., Xiong, Q., & Bao, Q. (2018) · Small · doi:10.1002/smll.201800682 · Cited by 228
Recent Advances in Perovskite Micro‐ and Nanolasers
Wang, K., Wang, S., Xiao, S., & Song, Q. (2018) · Advanced Optical Materials · doi:10.1002/adom.201800278 · Cited by 201
Single-Mode Lasing from Imprinted Halide-Perovskite Microdisks
Zhizhchenko, A., Syubaev, S., Berestennikov, A., Yulin, A. V., Porfirev, A., Pushkarev, A., Shishkin, I., Golokhvast, K., Bogdanov, A. A., Zakhidov, A. A., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b08948 · Cited by 187
Highly Reproducible Organometallic Halide Perovskite Microdevices based on Top‐Down Lithography
Zhang, N., Sun, W., Rodrigues, S. P., Wang, K., Gu, Z., Wang, S., Cai, W., Xiao, S., & Song, Q. (2017) · Advanced Materials · doi:10.1002/adma.201606205 · Cited by 176
Organometallic Perovskite Metasurfaces
Gholipour, B., Adamo, G., Cortecchia, D., Krishnamoorthy, H. N. S., Birowosuto, M. D., Zheludev, N. I., & Soci, C. (2017) · Advanced Materials · doi:10.1002/adma.201604268 · Cited by 168
Perovskite metasurfaces with large superstructural chirality
Long, G., Adamo, G., Tian, J., Klein, M., Krishnamoorthy, H. N. S., Feltri, E., Wang, H., & Soci, C. (2022) · Nature Communications · doi:10.1038/s41467-022-29253-0 · Cited by 163
Cegielski, P. J., Giesecke, A. L., Neutzner, S., Porschatis, C., Gandini, M., Schall, D., Perini, C. A. R., Bolten, J., Suckow, S., Kataria, S., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b02811 · Cited by 132
Micro‐ and Nanostructured Lead Halide Perovskites: From Materials to Integrations and Devices
Wang, K., Xing, G., Song, Q., & Xiao, S. (2021) · Advanced Materials · doi:10.1002/adma.202000306 · Cited by 126
Jeong, B., Han, H., & Park, C. (2020) · Advanced Materials · doi:10.1002/adma.202000597 · Cited by 121
Highly Controllable Etchless Perovskite Microlasers Based on Bound States in the Continuum
Wang, Y., Fan, Y., Zhang, X., Tang, H., Song, Q., Han, J., & Xiao, S. (2021) · ACS Nano · doi:10.1021/acsnano.1c00673 · Cited by 119
Alias, M. S., Yang, Y., Ng, T. K., Dursun, I., Shi, D., Saidaminov, M. I., Priante, D., Bakr, O. M., & Ooi, B. S. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02558 · Cited by 106
Self-citationPatterned Perovskites for Optoelectronic Applications
Yang, X., Wu, J., Liu, T., & Zhu, R. (2018) · Small Methods · doi:10.1002/smtd.201800110 · Cited by 95
Metal‐Halide Perovskite Lasers: Cavity Formation and Emission Characteristics
Moon, J., Mehta, Y., Gündoğdu, K., So, F. F., & Gu, Q. (2023) · Advanced Materials · doi:10.1002/adma.202211284 · Cited by 98
Yang, X., Ma, L., Li, L., Luo, M., Wang, X., Gong, Q., Lu, C., & Zhu, R. (2023) · Nature Reviews Materials · doi:10.1038/s41578-022-00522-0 · Cited by 92
Wu, J., Chen, J., Zhang, Y., Xu, Z., Zhao, L., Liu, T., Luo, D., Yang, W., Chen, K., Hu, Q., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00722 · Cited by 81
Cegielski, P. J., Neutzner, S., Porschatis, C., Lerch, H., Bolten, J., Suckow, S., Kandada, A. R. S., Chmielak, B., Petrozza, A., Wahlbrink, T., et al. (2017) · Optics Express · doi:10.1364/oe.25.013199 · Cited by 67
“In addition, the throughput of our method is many times higher than already reported patterning by e-beam [10] or focused ion beam (FIB) [30].”
MethodMetal Halide Perovskite Arrays: From Construction to Optoelectronic Applications
Han, X., Wu, W., Chen, H., Peng, D., Qiu, L., Yan, P., & Pan, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005230 · Cited by 66
Two-Step Patterning of Scalable All-Inorganic Halide Perovskite Arrays
Lin, C.-K., Zhao, Q., Zhang, Y., Cestellos-Blanco, S., Kong, Q., Lai, M., Kang, J., & Yang, P. (2020) · ACS Nano · doi:10.1021/acsnano.9b09685 · Cited by 62
Zhang, D., Zhang, Q., Zhu, Y., Poddar, S., Zhang, Y., Gu, L., Zeng, H., & Fan, Z. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201735 · Cited by 64
Alias, M. S., Tangi, M., Holguín‐Lerma, J. A., Stegenburgs, E., Alatawi, A. A., Ashry, I., Subedi, R. C., Priante, D., Shakfa, M. K., Ng, T. K., et al. (2018) · Journal of Nanophotonics · doi:10.1117/1.jnp.12.043508 · Cited by 65
“The GAFIB etching can enhance etching, reduce surface damage, and decrease the redeposition effect.(173,174) Figure 27(b) shows a substantial increase in the LOP detected from the top.”
BackgroundSelf-citationAdvanced Laser Nanofabrication Technologies for Perovskite Photonics
Cherepakhin, A. B., Zhizhchenko, A. Y., Khmelevskaia, D., Logunov, L., Kuchmizhak, A. A., & Makarov, S. (2024) · Advanced Optical Materials · doi:10.1002/adom.202302782 · Cited by 50
Tian, S., Sui, F., He, K., Cheng, G., Ge, Y., Ning, D., Wang, Z., Wang, Z., Tao, G., Wang, Z., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105335 · Cited by 45
Huang, R., Lin, D., Liu, J., Wu, C., Wu, D., & Luo, L. (2021) · Science China Materials · doi:10.1007/s40843-021-1654-5 · Cited by 45
Metal Halide Perovskites Functionalized by Patterning Technologies
Huang, X., Xiao, X., & Dong, G. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000513 · Cited by 42
High‐Quality CsPbBr 3 Perovskite Films with Modal Gain above 10 000 cm −1 at Room Temperature
Tatarinov, D., Anoshkin, S., Tsibizov, I. A., Шеремет, В. Н., Işık, F., Zhizhchenko, A. Y., Cherepakhin, A. B., Kuchmizhak, A. A., Pushkarev, A. P., Demir, H. V., et al. (2023) · Advanced Optical Materials · doi:10.1002/adom.202202407 · Cited by 41
Mao, W., Li, H., Tang, B., Zhang, C., Liu, L., Wang, P., Dong, H., & Zhang, L. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acf2d0 · Cited by 40
“Perovskite microlasers with artificial structures have recently been fabricated using the focused ion beam (FIB) technology [19, 20].”
MethodPerovskite micro-/nanoarchitecture for photonic applications
Liu, Y., Li, F., & Huang, W. (2023) · Matter · doi:10.1016/j.matt.2023.05.043 · Cited by 41
Polarization‐Tunable Perovskite Light‐Emitting Metatransistor
Klein, M., Wang, Y., Tian, J., Ha, S. T., Paniagua-Domínguez, R. J., Kuznetsov, A. I., Adamo, G., & Soci, C. (2022) · Advanced Materials · doi:10.1002/adma.202207317 · Cited by 39
Continuous-wave optically pumped green perovskite vertical-cavity surface-emitter
Alias, M. S., Liu, Z., Al-atawi, A., Ng, T. K., Wu, T., & Ooi, B. S. (2017) · Optics Letters · doi:10.1364/ol.42.003618 · Cited by 36
Self-citationChen, T., Wang, C., Yang, G., Lou, Q., Lin, Q., Zhang, S., & Zhou, H. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200679 · Cited by 36
Wang, B., Zhang, C., Zeng, B., Wu, C., Xie, C., Wu, D., Zhou, Y., & Luo, L. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c00521 · Cited by 34
Down-converting luminescent optoelectronics and their applications
Kang, C. H., Wang, Y., Alkhazragi, O., Lu, H., Ng, T. K., & Ooi, B. S. (2023) · APL Photonics · doi:10.1063/5.0127552 · Cited by 34
Self-citationChen, L., Cai, J., Li, J., Feng, S., Wei, G., & Li, W. (2019) · Organic Electronics · doi:10.1016/j.orgel.2019.05.036 · Cited by 34
Recent progress in the patterning of perovskite films for photodetector applications
Hu, C. Y., Li, B., Wang, X., Liu, C., Sun, D., & Cheng, H. (2025) · Light Science & Applications · doi:10.1038/s41377-025-01958-z · Cited by 33
“8a) 102 .”
Lan, S., Pan, B., Liu, Y., Zhang, Z., Zhang, L., Yu, B., Fang, Y., & Wang, P. (2023) · Carbon Energy · doi:10.1002/cey2.318 · Cited by 34
Li, C., Li, J., Li, C., Wang, J., Tong, X., Zhang, Z., Yin, Z., Wu, D., & Luo, L. (2021) · Advanced Optical Materials · doi:10.1002/adom.202100371 · Cited by 32
Yan, W., Guo, Y. R., Beri, D., Dottermusch, S., Chen, H., & Richards, B. S. (2020) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.202000070 · Cited by 31
Large‐Scale Perovskite Single Crystal Growth and Surface Patterning Technologies
Zhang, J., Song, J., & Zhang, Q. (2023) · Small Science · doi:10.1002/smsc.202300085 · Cited by 25
Template-Confined Oriented Perovskite Nanowire Arrays Enable Polarization Detection and Imaging
Lu, X., Li, J., Zhang, Y., Zhang, L., Chen, H., Zou, Y., & Zeng, H. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c04455 · Cited by 24
Shaping Organic Microcrystals Using Focused Ion Beam Milling
Li, W., van Baren, J., Berges, A. J., Bekyarova, E. B., Lui, C. H., & Bardeen, C. J. (2020) · Crystal Growth & Design · doi:10.1021/acs.cgd.9b01327 · Cited by 22
Lin, D., Liu, J., Haroldson, R., Moon, J., Li, Z., Zakhidov, A., Hu, W., & Gu, Q. (2022) · Advanced Optical Materials · doi:10.1002/adom.202201516 · Cited by 21
Metal Halide Perovskite Nano/Microwires
Wang, M., Cao, F., & Li, L. (2021) · Small Structures · doi:10.1002/sstr.202100165 · Cited by 20
Alias, M. S., Janjua, B., Zhao, C. F., Priante, D., Alhamoud, A. A., Tangi, M., Alanazi, L., Alatawi, A. A., Albadri, A., Alyamani, A. Y., et al. (2017) · IEEE photonics journal · doi:10.1109/jphot.2017.2749198 · Cited by 19
“a material with air-voids such as hybrid perovskites [39], [40] (similarity here where air-voids exist in between AlGaN NWs).”
BackgroundSelf-citationPatterning of perovskite–polymer films by wrinkling instabilities
Nasti, G., Sánchez, S., Gunkel, I., Balog, S., Roose, B., Wilts, B. D., Teuscher, J., Gentile, G., Cerruti, P., Ambrogi, V., et al. (2017) · Soft Matter · doi:10.1039/c6sm02629j · Cited by 14
Emerging Intelligent Manufacturing of Metal Halide Perovskites
Zhang, Y., Chen, T., Yi, S., Zhang, X., Jiao, Y., Lü, J., & Zhao, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200275 · Cited by 12
Chen, T., Hu, R., Sun, T. R., Li, Z., Li, B., Lv, X., Lin, B., Li, G., Zhang, S., & Zhou, H. (2024) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.4c00923 · Cited by 13
Synthesis of Perovskite Nanowires and Their Application for Photodetectors
Guo, J., Wang, C., Zhao, X., Hu, G., Zhang, X., Jiang, J., Wei, W., & Shen, L. (2025) · Advanced Science · doi:10.1002/advs.202510428 · Cited by 13
Glebov, N., Masharin, M. A., Borodin, B. R., Alekseev, P. A., Benimetskiy, F. A., Makarov, S., & Samusev, A. K. (2023) · Applied Physics Letters · doi:10.1063/5.0142570 · Cited by 8
Wafee, S., Leu, C., Chen, Y.-W., & Liu, B. H. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.171231 · Cited by 7
Direct etching of perovskite film by electron-beam scanning
Khachatryan, H., Kim, Y.-H., Kim, K., Yang, H., & Kim, M. (2018) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2018.10.022 · Cited by 6
Enhancing the focused ion beam etch rate of Ag films by Joule heating
Sasaki, T., & Tohmyoh, H. (2018) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.5054991 · Cited by 6
Highly Stable Solution‐Processed CsZnPbI 3 Perovskite Distributed Feedback Lasers
Majeed, A., Vaitkevičius, A., Stanionytė, S., Miasojedovas, S., Kreiza, G., & Ščajev, P. (2025) · Advanced Optical Materials · doi:10.1002/adom.202501896 · Cited by 5
Laser Cutting of Metal‐Halide‐Perovskite Wafers for X‐Ray Detector Integration
Deumel, S., Reg, Y., Huerdler, J. E., Hussenether, L., Schmidt, O., Barabash, A., Heiß, W., & Tedde, S. F. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202200642 · Cited by 5
Chiral perovskite based metasurface for linear and circular dichroism
Sharma, V., Kalra, Y., & Sinha, R. K. (2024) · Journal of Optics · doi:10.1088/2040-8986/ad80a7 · Cited by 4
Halide Perovskite Excitonic Diffraction Grating
Mamaeva, M. P., Lozhkin, M. S., Shurukhina, A. V., Stroganov, B. V., Emeline, A. V., & Kapitonov, Y. V. (2022) · Advanced Optical Materials · doi:10.1002/adom.202202152 · Cited by 4
Nanocrystal and Quasi-2D Perovskites Gain Media: From ASE to Laser
Chen, C., & Kou, H. (2025) · X-Disciplinarity · doi:10.63174/xdi.gqes2153 · Cited by 3
Towards High Precision Laser Nanostructuring of CsPbBr3 Perovskite with UV Femtosecond Laser Pulses
Cherepakhin, A. B., Kuchmizhak, A. A., Makarov, S., & Zhizhchenko, A. Y. (2024) · Bulletin of the Russian Academy of Sciences Physics · doi:10.1134/s1062873824709735 · Cited by 2
Exciting and confining light in Cr doped gallium oxide
Méndez, B., Alonso‐Orts, M., Nogales, E., Juán, J. S., & Nó, M. L. (2019) · Oxide-based Materials and Devices · doi:10.1117/12.2509672 · Cited by 2
Zehui, 周. Z., Xinyu, 段. D., Cong, 邹. Z., Zhongyu, 陈. C., Beibei, 许. X., & Jianrong, 邱. Q. (2026) · Chinese Journal of Lasers · doi:10.3788/cjl251207 · Cited by 1
Chiral Bismuth Halide Metasurfaces for Enhanced Second Harmonic Generation
Ilin, S., Yang, Y., Han, T., Azizov, R., Khubezhov, S. A., Zhizhchenko, A. Y., Kuchmizhak, A. A., Zelenkov, L. E., & Makarov, S. V. (2026) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6c01004 · Cited by 1
Low‐Dimensional Perovskites for Neuromorphic Vision Computing
Li, D., Zhang, S., Xie, P., Su, L., & Ho, J. C. Y. (2026) · Advanced Materials · doi:10.1002/adma.74278 · Cited by 2
Hybrid perovskites: Approaches towards light-emitting devices
Alias, M. S., Dursun, İ., Priante, D., Saidaminov, M. I., Ng, T. K., Bakr, O. M., & Ooi, B. S. (2016) · IEEE International Conference on Semiconductor Electronics · doi:10.1109/smelec.2016.7573638
“Details of the samples preparation and fabrication, plus with material characterizations are presented in previous publications [5-7].”
MethodSelf-citationFabrication of submicron structures on transparent quartz glasses with improved optical properties
Zhou, D., Dong, L., Zhang, Z., Liu, M., Wang, Y., Fu, Y., Wang, Z., & Wang, Z. (2017) · IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) · doi:10.1109/3m-nano.2017.8286337
“In recent years, inspired by “moth eye” effect, a number of technologies have been developed for the fabrication of submicron structures on the surfaces of materials, including ebeam lithography [1,2], nanoimprint lithography [3,4], colloidal lithography [5-7], focused ion beam patterning [8, 9], and laser interferenc…”
BackgroundPatterned perovskites for designing metasurfaces and laser arrays
Cherepakhin, A. B., Zhizhchenko, A. Y., Pushkarev, A. P., Kuchmizhak, A. A., & Makarov, S. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91661-5.00012-x
Microstructure‐Assisted Wafer‐Scale Fabrication of Perovskite Microlaser Arrays
Tan, Y., Yang, L., Song, H., Huang, M., Huang, J., Ali, W., Li, F., & Li, Z. (2024) · Small · doi:10.1002/smll.202401596
Microfabrication of Chiral 2D Metal Halide Perovskite Structures for Photonic Applications
Борисович, Д. Д., Molavi, S., Lozhkina, O. A., Scalon, L., Brunner, J., Ma, L., Rivkin, B. B., Gallop, N. P., & Vaynzof, Y. (2026) · Small Structures · doi:10.1002/sstr.202500820
“…fabricating micro-and nanostructures of these materials using established approaches, such as photolithography and ion/ electron-beam patterning, followed by etching [45, 46], remains challenging, motivating the development of resist-orthogonal processes and alternative patterning routes.”
Lasers à pérovskites hybrides halogénées en microcavité
Bouteyre, P. (2019) · theses.fr (ABES) · doi:10.70675/42bf2a2aze3d3z4050zb89cz3212f870f879 · Cited by 3
Berry, F. (2020) · theses.fr (ABES) · doi:10.70675/d76e9870z8597z450az91adzdb620f3b6435 · Cited by 5
Modifying Halide Perovskites Using Charged Particle Beams
Bashegurova, E. A., Samsonova, A. Y., Nazarov, R. S., Deribina, E. I., Giappa, R. M., Stoumpos, C. C., & Kapitonov, Y. V. (2026) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c02551
Metadata
- Authors
- Alias, M. S., Dursun, I., Shi, D., Saidaminov, M. I., Diallo, E. M., Priante, D., Ng, T. K., Bakr, O. M., & Ooi, B. S.
- Affiliations
- King Abdullah University of Science and Technology (SA)
- King Abdullah University of Science and Technology (KAUST) Solar and Photovoltaics Engineering Research Center (SPERC), Physical Sciences and Engineering (PSE), , Thuwal 23955-6900, Saudi Arabia
- ORCID
- Venue
- Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena
- Publisher
- American Vacuum Society
- Published
- 2015-07-30
- Volume
- 33
- Issue
- 5
- ISSN
- 2166-2746 (ISSN-L)
- 2166-2754
- OpenAlex
- W2108438959
- Semantic Scholar
- 7d1a8f8087d9a48aa50f6cb1ab171866a329df35
- Cited by
- 69
- References
- 22
- Citations by year
- 2026: 4 · 2025: 4 · 2024: 6 · 2023: 11 · 2022: 8 · 2021: 5 · 2020: 9 · 2019: 4 · 2018: 8 · 2017: 8 · 2016: 1 · 2015: 1
- FWCI
- 5.51
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/3.0/ (vor)
- creativecommons.org/licenses/by/3.0/ (tdm)
- Locations
- Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena (publishedVersion, cc-by)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion)
- Funders
- King Abdullah University of Science and Technology
- King Abdulaziz City for Science and Technology
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Ion-surface interactions and analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Laser Material Processing Techniques
- Keywords
- methylammonium lead tribromide, focused ion beam patterning, subwavelength gratings, XeF2 etching, sputtering yield, grating reflectors, nanophotonic devices, photonic nanostructures
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.