Photo-sensitive hydrogels for three-dimensional laser microfabrication in the presence of whole organisms
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Hydrogels are polymeric materials with water contents similar to that of soft tissues. Due to their biomimetic properties, they have been extensively used in various biomedical applications including cell encapsulation for tissue engineering. The utilization of photopolymers provides a possibility for the temporal and spatial controlling of hydrogel cross-links. We produced three-dimensional (3-D) hydrogel scaffolds by means of the two-photon polymerization (2PP) technique. Using a highly efficient water-soluble initiator, photopolymers with up to 80 wt.% water were processed with high precision and reproducibility at a writing speed of 10 mm/s. The biocompatibility of the applied materials was verified using Caenorhabditis elegans as living test organisms. Furthermore, these living organisms were successfully embedded within a 200×200×35 μm³ hydrogel scaffold. As most biologic tissues exhibit a window of transparency at the wavelength of the applied femtosecond laser, it is suggested that 2PP is promising for an in situ approach. Our results demonstrate the feasibility of and potential for bio-fabricating 3-D tissue constructs in the micrometre-range via near-infrared lasers in direct contact with a living organism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
UV-induced DNA damage and repair: a review
Sinha, R. P., & Häder, D.-P. (2002) · Photochemical & Photobiological Sciences · doi:10.1039/b201230h · Cited by 1,978
Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties
Kloxin, A. M., Kasko, A. M., Salinas, C. N., & Anseth, K. S. (2009) · Science · doi:10.1126/science.1169494 · Cited by 1,748
Functional regeneration after laser axotomy
Yanik, M. F., Cinar, H., Cinar, H. N., Chisholm, A. D., Jin, Y., & Ben-Yakar, A. (2004) · Nature · doi:10.1038/432822a · Cited by 598 · cited 1×
“high cell viability and causing no nonspecific intracellular ablation.(56) For our experiments, we expected a laser induced photodam-”
BackgroundOvsianikov, A., Malinauskas, M., Schlie, S., Chichkov, B., Gittard, S., Narayan, R., Löbler, M., Sternberg, K., Schmitz, K.-P., & Haverich, A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.10.023 · Cited by 234
Self-citation
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Self-citationXing, J.-F., Zheng, M.-L., & Duan, X.-M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00278h · Cited by 628
Ultrafast laser nanostructuring of photopolymers: a decade of advances
Malinauskas, M., Farsari, M., Piskarskas, A., & Juodkazis, S. (2013) · Physics Reports · doi:10.1016/j.physrep.2013.07.005 · Cited by 431
Photopolymer Materials and Processes for Advanced Technologies
Crivello, J. V., & Reichmanis, E. (2014) · Chemistry of Materials · doi:10.1021/cm402262g · Cited by 406
Direct laser writing: Principles and materials for scaffold 3D printing
Selimis, A., Mironov, V., & Farsari, M. (2015) · Microelectronic Engineering · doi:10.1016/j.mee.2014.10.001 · Cited by 344
Self-citation
Metadata
- Authors
- Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N., Qin, X., Li, Z., Cicha, K., Machacek, T., Liska, R., Jantsch, V., & Stampfl, J.
- Venue
- Journal of Biomedical Optics
- Publisher
- SPIE-Intl Soc Optical Eng
- Published
- 2012-10-15
- Volume
- 17
- Issue
- 10
- Pages
- 1
- ISSN
- 1083-3668 (ISSN-L)
- OpenAlex
- W2041985632
- Cited by
- 136
- References
- 4
- FWCI
- 6.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Photo-sensitive hydrogels for three-dimensional laser microfabrication in the presence of whole organisms. https://app.cochat.ai/papers/10.1117/1.jbo.17.10.105008
- The paper
- Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N., Qin, X., Li, Z., Cicha, K., Machacek, T., Liska, R., Jantsch, V., & Stampfl, J. (2012). Photo-sensitive hydrogels for three-dimensional laser microfabrication in the presence of whole organisms. Journal of Biomedical Optics. https://doi.org/10.1117/1.jbo.17.10.105008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.