Evaluation of EUV resist performance with interference lithography towards 11 nm half-pitch and beyond
Open accessThe DOI matches its Crossref record.
Abstract
The performance of EUV resists is one of the main challenges for the cost-effectiveness and the introduction of EUV lithography into high-volume manufacturing. The EUV interference lithography (EUV-IL) is a simple and powerful technique to print periodic nanostructures with a resolution beyond the capabilities of other tools. In addition, the well-defined and pitch-independent aerial image of the EUV-IL provides further advantages for the analysis of resist performance. In this paper, we present evaluation of chemically-amplified resists (CAR) and inorganic resists using EUV-IL. We illustrate the performance of the tool through a reproducibility study of a baseline resist over the course of 16 months. A comparative study of the performance of different resists is presented with the aim of resolving patterns with CARs for 16 nm half-pitch (HP) and 11 nm HP. Critical dimension (CD) and line-edge roughness (LER) are evaluated as functions of dose for different process conditions. With a CAR with about 10 mJ/cm2 sensitivity, 18 nm L/S patterns are obtained with low LER and well-resolved patterns are achieved down to 16 nm HP. With another CAR of about 35 mJ/cm2 sensitivity, L/S patterns with low LER are demonstrated down to 14 nm HP. Resolved patterns are achieved down to 12 HP, demonstrating the capability of its potential towards 11 nm HP if pattern collapse mitigation can be successfully applied. With EUV-sensitive inorganic resists, patterning down to 8 nm has been realized. In summary, we show that resist platforms with reasonable sensitivities are already available for patterning at 16 nm HP, 11 nm HP, and beyond, although there is still significant progress is needed. We also show that with decreasing HP, pattern collapse becomes a crucial issue limiting the resolution and LER. Therefore resist stability, collapse mitigation, and etch resistance are some of the significant problems to be addressed in the development of resist platforms for future technology nodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Photolithographic properties of tin-oxo clusters using extreme ultraviolet light (13.5nm)
Cardineau, B., Del Re, R., Marnell, M., Al-Mashat, H., Vockenhuber, M., Ekinci, Y., Sarma, C., Freedman, D. A., & Brainard, R. L. (2014) · Microelectronic Engineering · doi:10.1016/j.mee.2014.04.024 · Cited by 202
Beyond EUV lithography: a comparative study of efficient photoresists' performance
Mojarad, N., Gobrecht, J., & Ekinci, Y. (2015) · Scientific Reports · doi:10.1038/srep09235 · Cited by 162
Self-citationInterference lithography at EUV and soft X-ray wavelengths: Principles, methods, and applications
Mojarad, N., Gobrecht, J., & Ekinci, Y. (2015) · Microelectronic Engineering · doi:10.1016/j.mee.2015.03.047 · Cited by 114
Self-citationIntegrated fab process for metal oxide EUV photoresist
Grenville, A., Anderson, J. T., Clark, B. L., De Schepper, P., Edson, J., Greer, M., Jiang, K., Kocsis, M., Meyers, S. T., Stowers, J. K., et al. (2015) · SPIE Proceedings · doi:10.1117/12.2086006 · Cited by 90
EUV resists based on tin-oxo clusters
Cardineau, B., Del Re, R., Al-Mashat, H., Marnell, M., Vockenhuber, M., Ekinci, Y., Sarma, C., Neisser, M., Freedman, D. A., & Brainard, R. L. (2014) · SPIE Proceedings · doi:10.1117/12.2046536 · Cited by 67
Self-citation
Metadata
- Authors
- Ekinci, Y., Vockenhuber, M., Hojeij, M., Wang, L., & Mojarad, N. M.
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 2013-04-01
- Volume
- 8679
- Pages
- 867910-867910
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W2016792083
- Cited by
- 83
- References
- 0
- FWCI
- 21.57
- Type
- conference paper
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluation of EUV resist performance with interference lithography towards 11 nm half-pitch and beyond. https://app.cochat.ai/papers/10.1117/12.2011533
- The paper
- Ekinci, Y., Vockenhuber, M., Hojeij, M., Wang, L., & Mojarad, N. M. (2013). Evaluation of EUV resist performance with interference lithography towards 11 nm half-pitch and beyond. SPIE Proceedings. https://doi.org/10.1117/12.2011533
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.