Pulsed thermographic inspection of CFRP structures: experimental results and image analysis tools
The DOI matches its Crossref record; 15 of the 18 references it cites were found in a registry or an index.
Abstract
In this study, three different CFRP specimens with internal artificial delaminations of various sizes and located at different depths were investigated by means of Pulsed Thermography (PT) under laboratory conditions. The three CFRP panels, having the same thickness and defects characteristics but with a different shape (planar, trapezoid and curved), were assessed after applying various signal processing tools on the acquired thermal data (i.e. Thermographic Signal Reconstruction, Pulsed Phase Thermography and Principal Component Thermography). The effectiveness of the above processing tools was initially evaluated in a qualitative manner, comparing the imaging outputs and the information retrieval in terms of defect detectability enhancement and noise reduction. Simultaneously, the produced defect detectability was evaluated through Signal-to-Noise Ratio (SNR) computations, quantifying the image quality and the intensity contrast produced between the defected area and the adjacent background area of the test panel. From the results of this study, it can be concluded that the implementation of PT along with the application of advanced signal processing algorithms can be a useful technique for NDT assessment, providing enhanced qualitative information. Nevertheless, SNR analysis showed that despite the enhanced visibility resulting from these algorithms, these can be properly applied in order to retrieve the best possible information according to the user’s demands.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The biggest drawback of new energy compared to traditional means of power generation is its uncertainty, so more advanced detection means are needed to facilitate its accurate regulation and control [55].”
From Reform of Electrical Engineering Undergraduate Teaching and the Curriculum System in the Context of the Energy Internet (2023) · cites this paper as [55]
Citations
Cites
Carslaw, H. S., & Jaeger, J. C. (1947) · International Linear Collider · Cited by 21,232
Theory and Practice of Infrared Technology for Nondestructive Testing
Maldague, X. (2001) · Cited by 1,657
Self-citationPulse phase infrared thermography
Maldague, X., & Marinetti, S. (1996) · Journal of Applied Physics · doi:10.1063/1.362662 · Cited by 1,019 · cited 1×
“A frequency domain analysis that is quite robust against the effects of surface characteristics such as geometrical and emissivity variations is Pulsed Phase Thermography (PPT) [10,11].”
BackgroundSelf-citationRajic, N. (2002) · Composite Structures · doi:10.1016/s0263-8223(02)00161-7 · Cited by 701 · cited 1×
“Lastly, Principal Component Analysis also known as Principal Component Thermography, is an orthogonal linear transformation, that reorganizes the thermographic sequence into a new coordinate system replacing the time-history thermal data with Empirical Orthogonal Functions (EOFs), which describe the main spatial and t…”
Reconstruction and enhancement of active thermographic image sequences
Shepard, S. M. (2003) · Optical Engineering · doi:10.1117/1.1566969 · Cited by 475 · cited 1×
“Once the time evolution data has been approximated into a polynomial series, the original temperature data can be reconstructed in order to produce synthetic temperature data and derivative images, which offer a higher degree of signal-to-noise ratio, spatial and temporal resolution increase and a further reduction of…”
MethodIbarra-Castanedo, C., Piau, J.-M., Guilbert, S., Avdelidis, N. P., Genest, M., Bendada, A., & Maldague, X. P. V. (2009) · Research in Nondestructive Evaluation · doi:10.1080/09349840802366617 · Cited by 296
Self-citationPulsed phase thermography reviewed
Ibarra-Castanedo, C., & Maldague, X. (2004) · Quantitative InfraRed Thermography Journal · doi:10.3166/qirt.1.47-70 · Cited by 265 · cited 1×
“A frequency domain analysis that is quite robust against the effects of surface characteristics such as geometrical and emissivity variations is Pulsed Phase Thermography (PPT) [10,11].”
BackgroundSelf-citationAdvances in pulsed thermography:
Shepard, S. M. (2001) · SPIE Proceedings · doi:10.1117/12.421032 · Cited by 204 · cited 11×
“As can be seen, for the shallowest defects (located at the depth of 0.2 mm) TSR through its 1st time derivative analysis and PPT over synthetic temperature data produced the highest signal-to-noise ratios, while 2nd time derivative analysis and PPT over raw temperature data followed.”
BackgroundInfluentialQualitative and quantitative assessment of aerospace structures by pulsed thermography
Ibarra‐Castanedo, C., Genest, M., Servais, P., Maldague, X., & Bendada, A. H. (2007) · Nondestructive Testing And Evaluation · doi:10.1080/10589750701448548 · Cited by 67
Self-citationReview and comparison of shearography and pulsed thermography for adhesive bond evaluation
Hung, Y. Y., Ng, N., Ng, R., Shepard, S. M., Hou, Y., & Lhota, J. R. (2007) · Optical Engineering · doi:10.1117/1.2741277 · Cited by 61
Non-destructive testing of Cu solder connections using active thermography
Maierhofer, C., Röllig, M., Steinfurth, H., Ziegler, M., Kreutzbruck, M., Scheuerlein, C., & Heck, S. (2012) · NDT & E International · doi:10.1016/j.ndteint.2012.07.010 · Cited by 30 · cited 1×
“2, where Sdef is the intensity arithmetic mean of all the pixels inside the defective area, Ssa is the intensity arithmetic mean of all the pixels inside the reference area and σnoise is the standard deviation of the pixels inside the reference area [15].”
BackgroundKlein, M. T., Ibarra‐Castanedo, C., Maldague, X., & Bendada, A. (2008) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.776781 · Cited by 28
Self-citationHerrera, P. A., Madruga, F. J., Cobo, A., & Higuera, J. M. L. (2010) · International Conference on Quantitative InfraRed Thermography (QIRT) · doi:10.21611/qirt.2010.004 · Cited by 26
Dobbinson, A., Avdelidis, N. P., Almond, D. P., & Drinkwater, B. W. (2003) · Cited by 5
Self-citationDobbinson, A., Avdelidis, N., Almond, D., & Drinkwater, B. (2003) · Bristol Research (University of Bristol) · Cited by 1
Self-citation
Cited by
Automatic seeded region growing for thermography debonding detection of CFRP
Feng, Q., Gao, B., Lü, P., Woo, W. L., Yang, Y., Fan, Y., Qiu, X., & Gu, L. (2018) · NDT & E International · doi:10.1016/j.ndteint.2018.06.001 · Cited by 67
Ahmed, J., Gao, B., & Woo, W. L. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2881341 · Cited by 58
Strain State Detection in Composite Structures: Review and New Challenges
Arena, M., & Viscardi, M. (2020) · Journal of Composites Science · doi:10.3390/jcs4020060 · Cited by 51
“In the study of [136], three different CFRP specimens having the same thickness and defects characteristics, but with a different shape (planar, trapezoid, and curved) were investigated under laboratory conditions.”
BackgroundChang, Y.-S., Yan, Z., Wang, K., & Yao, Y. (2016) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.12.014 · Cited by 38
Yan, Z., Chen, C.-Y., Luo, L., & Yao, Y. (2016) · Journal of Process Control · doi:10.1016/j.jprocont.2016.11.008 · Cited by 35
Metadata
- Authors
- Theodorakeas, P., Avdelidis, N. P., Ibarra-Castanedo, C., Koui, M., & Maldague, X.
- Affiliations
- National Technical University of Athens (GR)
- Université Laval (CA)
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 2014-03-08
- Volume
- 9062
- Pages
- 90620F
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W2009767316
- Cited by
- 17
- References
- 18
- Citations by year
- 2025: 1 · 2023: 2 · 2021: 2 · 2020: 1 · 2019: 1 · 2018: 4 · 2017: 1 · 2016: 2 · 2015: 3
- FWCI
- 6.59
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Thermography and Photoacoustic Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Health Sciences › Medicine › Radiology, Nuclear Medicine and Imaging › Infrared Thermography in Medicine
- Keywords
- pulsed thermography, carbon fiber reinforced polymer, delamination detection, non-destructive testing, thermographic signal reconstruction, pulsed phase thermography, principal component thermography, signal-to-noise ratio, defect detectability, image analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.