Polycarbonate based nonchemically amplified photoresists for extreme ultraviolet lithography
The DOI matches its Crossref record.
Abstract
Some initial EUVL patterning results for polycarbonate based non-chemically amplified resists are presented. Without full optimization the developer a resolution of 60 nm line spaces could be obtained. With slight overexposure (1.4 × E0) 43.5 nm lines at a half pitch of 50 nm could be printed. At 2x E0 a 28.6 nm lines at a half pitch of 50 nm could be obtained with a LER that was just above expected for mask roughness. Upon being irradiated with EUV photons, these polymers undergo chain scission with the loss of carbon dioxide and carbon monoxide. The remaining photoproducts appear to be non-volatile under standard EUV irradiation conditions, but do exhibit increased solubility in developer compared to the unirradiated polymer. The sensitivity of the polymers to EUV light is related to their oxygen content and ways to increase the sensitivity of the polymers to 10 mJ cm-2 is discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Advanced lithography materials: From fundamentals to applications
Zhang, Y., Yu, H., Wang, L., Wu, X., He, J., Huang, W., Ouyang, C., Chen, D., & Keshta, B. E. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103197 · Cited by 72
Key Challenges and Opportunities for Advanced Extreme Ultraviolet Lithography Photoresist Materials
Li, M., & Aqad, E. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202420962 · Cited by 33
The chemistry and application of nonchemically amplified (non-CA) chain-scission resists
Whittaker, A. K. (2016) · Frontiers of Nanoscience · doi:10.1016/b978-0-08-100354-1.00006-5 · Cited by 3
Self-citationRecent Progress of Nonchemically‐Amplified Resists for High‐Resolution Lithography †
Li, H., Peng, R., Liu, Z., Lian, P., Chen, J., Yu, T., Zeng, Y., Wang, S., Guo, X., Hu, R., et al. (2026) · Chinese Journal of Chemistry · doi:10.1002/cjoc.70573 · Cited by 2
Metadata
- Authors
- Blakey, I., Yu, A., Blinco, J., Jack, K. S., Liu, H., Leeson, M., Yueh, W., Younkin, T., & Whittaker, A. K.
- Venue
- SPIE Proceedings
- Publisher
- SPIE
- Published
- 2010-03-11
- Volume
- 7636
- Pages
- 763635
- ISSN
- 0277-786X (ISSN-L)
- OpenAlex
- W2106565843
- Cited by
- 16
- References
- 0
- FWCI
- 1.75
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polycarbonate based nonchemically amplified photoresists for extreme ultraviolet lithography. https://app.cochat.ai/papers/10.1117/12.853620
- The paper
- Blakey, I., Yu, A., Blinco, J., Jack, K. S., Liu, H., Leeson, M., Yueh, W., Younkin, T., & Whittaker, A. K. (2010). Polycarbonate based nonchemically amplified photoresists for extreme ultraviolet lithography. SPIE Proceedings. https://doi.org/10.1117/12.853620
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.