Rheometer for equibiaxial and planar elongations of polymer melts
The DOI matches its Crossref record.
Abstract
In a new rheometer for polymer melts equibiaxial and planar elongations were performed at 150 °C with a low and a high density polyethylene (LDPE and HDPE, respectively), and equibiaxial elongations at 170 °C with a commercial polystsyrene (PS); for simple elongations a previously described rheometer was used. Each sample is clamped by metal belts that introduce the elongation and measure the forces that act upon each clamp. The samples are small and are supported by inert gas. By particle tracking and video recording the deformation history and the test performance are determined. The resulting elongational viscosities μi(t) (i=u, e, p for the different elongational modes) are newly defined such that at small strain rates they are equal to the linear viscoelastic shear viscosity, η°(t). The ratio μi/η° represents the nonlinear behavior: μi/η°>1 means strain hardening and μi/η°<1 strain softening. Hardening occurs in simple and in planar elongation in the flow direction, more for LDPE than for HDPE and is smallest for PS (simple elongation only). In equibiaxial elongation, there is softening followed by much (LDPE), little (HDPE), and no (PS) hardening. Planar elongation causes softening in the cross direction (more for HDPE than for LDPE). At the end of planar elongation, the samples become hazy and form holes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Systematic time-scale-bridging molecular dynamics applied to flowing polymer melts
Ilg, P., Öttinger, H. C., & Kröger, M. (2009) · Physical Review E · doi:10.1103/physreve.79.011802 · Cited by 52
Ilg, P., & Kröger, M. (2011) · Journal of Rheology · doi:10.1122/1.3523485 · Cited by 38
Ilg, P. (2010) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2010.01.022 · Cited by 9
Metadata
- Authors
- Hachmann, P., & Meissner, J.
- Venue
- Journal of Rheology
- Publisher
- Society of Rheology
- Published
- 2003-07
- Volume
- 47
- Issue
- 4
- Pages
- 989-1010
- ISSN
- 0097-0360 (ISSN-L)
- 0148-6055
- 1520-8516
- OpenAlex
- W2054342166
- Cited by
- 88
- References
- 0
- FWCI
- 7.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rheometer for equibiaxial and planar elongations of polymer melts. https://app.cochat.ai/papers/10.1122/1.1574021
- The paper
- Hachmann, P., & Meissner, J. (2003). Rheometer for equibiaxial and planar elongations of polymer melts. Journal of Rheology. https://doi.org/10.1122/1.1574021
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.