Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Blends of 75 wt. % amorphous polylactide (PLA) with 25 wt. % poly[(butylene succinate)-co-adipate] (PBSA) and poly[(butylene adipate)-co-terephthalate] were separately prepared using an internal batch mixer. The morphology and viscoelastic properties of these two blends were analyzed and compared. Annealing did not cause any pronounced morphology changes nor a subsequent modification of the viscoelastic behavior for both blends. However, applying a shear for 20 min at a rate of 0.05 s−1 induced significant droplet coalescence in both blends, although the changes in the viscoelastic response were more prominent in the PLA/PBSA blend. It was also shown that applying a shear for 10 and 20 min at a rate of 0.2 s−1 caused a slight droplet coalescence and minor changes in the viscoelastic behavior of both blends. Moreover, the Palierne model was used to calculate the interfacial tensions between the blend components. It was also utilized to estimate the droplet size after applying annealing and shearing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0774-2 · Cited by 240
(Co)polymers of L‐lactide, 2. Mechanical properties
Grijpma, D. W., & Pennings, A. J. (1994) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1994.021950516 · Cited by 191
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Self-citationAversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Jalali Dil, E., Carreau, P. J., & Favis, B. D. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.012 · Cited by 158
Self-citationGigante, V., Canesi, I., Cinelli, P., Coltelli, M. B., & Lazzeri, A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.03.015 · Cited by 156
Palai, B., Mohanty, S., & Nayak, S. K. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106130 · Cited by 96
Metadata
- Authors
- Nofar, M., Maani, A., Sojoudi, H., Heuzey, M. C., & Carreau, P. J.
- Venue
- Journal of Rheology
- Publisher
- Society of Rheology
- Published
- 2015-01-13
- Volume
- 59
- Issue
- 2
- Pages
- 317-333
- ISSN
- 0097-0360 (ISSN-L)
- 0148-6055
- 1520-8516
- OpenAlex
- W1966917433
- Cited by
- 143
- References
- 6
- FWCI
- 7.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.