The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
(Co)polymers of L‐lactide, 2. Mechanical properties
Abstract
The effect of copolymerization of L‐lactide with several lactones and cyclic carbonates and the processing variables in compression moulding of poly(L‐lactide) homopolymers on the mechanical properties was investigated. Sharp maxima in the impact strength versus comonomer composition and heat of fusion were obtained, reflecting the important role of the presence of a crystalline fraction in the material. Crystalline domains increase the interconnectivity of a physical polylactide network and decrease the molecular weight between these physical crosslinks. The brittle strength concomitantly increases, and as the yield stress remains more or less constant, an increase in impact strength is observed. Very high crystalline as‐polymerized poly(L‐lactide) prepared with less active catalysts on the other hand has an extremely low entanglement density and therefore a low brittle tensile strength.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
The Physical Properties of Polymers
Simpson, W. (1963) · International Journal of Electrical Engineering & Education · doi:10.1177/002072096300100111 · Cited by 961
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Self-citationPitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Biodegradable poly(lactic acid) polymers
Kulkarni, R. K., Moore, E. G., Hegyeli, A. F., & Leonard, F. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050305 · Cited by 799
Bioresorbability and biocompatibility of aliphatic polyesters
Vert, M., Li, S. M., Spenlehauer, G., & Guerin, P. (1992) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701240 · Cited by 770
Molecular morphology in semicrystalline polymers
Flory, P. J., & Yoon, D. Y. (1978) · Nature · doi:10.1038/272226a0 · Cited by 489
Li, S., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00701077 · Cited by 488
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Self-citation
Research works printed but not linked: 3
- Lipinsky E. S., 1986, Chem. Eng. Prog., 82, 26
- Tunc D. C., Chem. Abstr., 112, P185857g
- Kausch H. H., 1986, Polymer Fracture
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Metadata
- Authors
- Grijpma, D. W., & Pennings, A. J.
- Affiliations
- University of Groningen (NL)
- ORCID
- Grijpma, Dirk W.
- Venue
- Macromolecular Chemistry and Physics
- Publisher
- Wiley
- Published
- 1994-05
- Volume
- 195
- Issue
- 5
- Pages
- 1649-1663
- ISSN
- 1022-1352 (ISSN-L)
- 1521-3935
- OpenAlex
- W1981480787
- Cited by
- 191
- References
- 28
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 6 · 2023: 3 · 2022: 9 · 2021: 6 · 2020: 8 · 2019: 9 · 2018: 12 · 2017: 10 · 2016: 17 · 2015: 14 · 2014: 4 · 2013: 11 · 2012: 14
- FWCI
- 2.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecular Chemistry and Physics (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (publishedVersion)
- University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), copolymers, lactones, cyclic carbonates, mechanical properties, impact strength, crystallinity, compression molding, physical crosslinks, entanglement density, yield stress, tensile strength, catalytic activity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: (Co)polymers of L‐lactide, 2. Mechanical properties. https://app.cochat.ai/papers/10.1002/macp.1994.021950516
- The paper
- Grijpma, D. W., & Pennings, A. J. (1994). (Co)polymers of L‐lactide, 2. Mechanical properties. Macromolecular Chemistry and Physics. https://doi.org/10.1002/macp.1994.021950516
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.