CoChat

High-entropy materials for catalysis: A new frontier

Open access
Sun, Yifan, Dai, Sheng · 2021 · Science Advances

The DOI matches its Crossref record; 152 of the 152 references it cites were found in a registry or an index.

Abstract

High-entropy materials with compositional and structural complexities introduce a transformative opportunity for catalysis.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/sciadv.abg1600

Cites

152 of 152 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Characterization of HEMs. (A) Schematic showing structures with different degrees of order and disorder between interface formation and ideal random solid solutions containing five (or more than five) principal elements. (B) Schematic summarizing the diffraction, microscopy, and spectroscopy techniques for the characterization of HEMs. AES, Auger electron spectroscopy; LEIS, low-energy ion scattering spectroscopy; ETEM, environmental transmission electron microscopy. (C) Room temperature neutron PDF data of the Al1.3CoCrCuFeNi HEA and the simulated pattern based on the cubic structure. (D) Neutron PDF data of the Al1.3CoCrCuFeNi HEA at 1400°C and the simulated pattern based on the local structure model with short-range order. (C) and (D) are reproduced with permission from the Nature Publishing Group (43). (E) Atomic-resolution high-angle annular dark-field (HAADF) image of the CrMnFeCoNi HEA and corresponding EDS element maps for Cr, Mn, Fe, Co, and Ni. Reproduced with permission from the Nature Publishing Group (45). (F) Normalized EXAFS spectra of the MgNiCuCoZnOx HEO. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (113).
Fig. 1 Characterization of HEMs. (A) Schematic showing structures with different degrees of order and disorder between interface formation and ideal random solid solutions containing five (or more than five) principal elements. (B) Schematic summarizing the diffraction, microscopy, and spectroscopy techniques for the characterization of HEMs. AES, Auger electron spectroscopy; LEIS, low-energy ion scattering spectroscopy; ETEM, environmental transmission electron microscopy. (C) Room temperature neutron PDF data of the Al1.3CoCrCuFeNi HEA and the simulated pattern based on the cubic structure. (D) Neutron PDF data of the Al1.3CoCrCuFeNi HEA at 1400°C and the simulated pattern based on the local structure model with short-range order. (C) and (D) are reproduced with permission from the Nature Publishing Group (43). (E) Atomic-resolution high-angle annular dark-field (HAADF) image of the CrMnFeCoNi HEA and corresponding EDS element maps for Cr, Mn, Fe, Co, and Ni. Reproduced with permission from the Nature Publishing Group (45). (F) Normalized EXAFS spectra of the MgNiCuCoZnOx HEO. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (113).CC BY-NC · PubMed Central
Fig. 2 HEAs for thermocatalysis. (A) Schematic illustrating the carbothermal shock synthesis of the HEA nanoparticles (left) and temperature evolution during the rapid heating-cooling process (right). (B) Schematic comparing the phase-separated heterostructures synthesized by a conventional method with slow kinetics and the HEA nanoparticles prepared by the carbothermal shock approach. (C) Individual and low-magnification HAADF-STEM images with EDS element maps of octonary (PtPdCoNiFeCuAuSn) nanoparticles (left). Scale bar, 10 nm. Atomically resolved HAADF-STEM image with the fast Fourier transform (FFT) pattern showing the fcc structure (right). (A) to (C) are reproduced with permission from the American Association for the Advancement of Science (29). (D) Catalytic decomposition of ammonia using the RuRhCoNi (Ru-4) MEA nanoparticles, Ru and RhCoNi catalysts (left), and two RuRhCoNiIr samples prepared by the carbothermal shock method (Ru-5 MEA-NPs) and the traditional impregnation approach (Ru-5 IMP), respectively (right). (E) Performance comparison of the Ru-4 MEA and Ru-5 MEA nanoparticles with previously reported Ru-based catalysts for ammonia decomposition. (D) and (E) are reproduced with permission from the American Association for the Advancement of Science (http://creativecommons.org/licenses/by-nc/4.0/legalcode) (64). (F) Schematic illustration highlighting the rate-limiting factors in Co-rich (HEA-Co45Mo25), optimal (HEA-Co25Mo45), and Mo-rich (HEA-Co15Mo55) catalysts for ammonia decomposition. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (67).
Fig. 2 HEAs for thermocatalysis. (A) Schematic illustrating the carbothermal shock synthesis of the HEA nanoparticles (left) and temperature evolution during the rapid heating-cooling process (right). (B) Schematic comparing the phase-separated heterostructures synthesized by a conventional method with slow kinetics and the HEA nanoparticles prepared by the carbothermal shock approach. (C) Individual and low-magnification HAADF-STEM images with EDS element maps of octonary (PtPdCoNiFeCuAuSn) nanoparticles (left). Scale bar, 10 nm. Atomically resolved HAADF-STEM image with the fast Fourier transform (FFT) pattern showing the fcc structure (right). (A) to (C) are reproduced with permission from the American Association for the Advancement of Science (29). (D) Catalytic decomposition of ammonia using the RuRhCoNi (Ru-4) MEA nanoparticles, Ru and RhCoNi catalysts (left), and two RuRhCoNiIr samples prepared by the carbothermal shock method (Ru-5 MEA-NPs) and the traditional impregnation approach (Ru-5 IMP), respectively (right). (E) Performance comparison of the Ru-4 MEA and Ru-5 MEA nanoparticles with previously reported Ru-based catalysts for ammonia decomposition. (D) and (E) are reproduced with permission from the American Association for the Advancement of Science (http://creativecommons.org/licenses/by-nc/4.0/legalcode) (64). (F) Schematic illustration highlighting the rate-limiting factors in Co-rich (HEA-Co45Mo25), optimal (HEA-Co25Mo45), and Mo-rich (HEA-Co15Mo55) catalysts for ammonia decomposition. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (67).CC BY-NC · PubMed Central
Fig. 3 HEAs for electrocatalysis. (A) Adsorption energies of *OH (left) and *O (right) based on DFT calculations, where each color represents an individual binding site. Reproduced with permission from Elsevier (73). (B) Comparison between the predicted OH* adsorption energies and the experimentally measured ORR activities. Reproduced with permission from Elsevier (74). (C) Schematic illustration of the combinatorial and high-throughput synthesis of MMNCs. Reproduced with permission from the National Academy of Sciences (https://creativecommons.org/licenses/by-nc-nd/4.0/) (75). (D) Comparison of the ORR activities (overpotentials at −0.5 V at normalized scale) of individual, binary, ternary, and quinary alloy nanoparticles prepared by the ionic liquid–assisted cosputtering method. Reproduced with permission from John Wiley and Sons (80). (E) The HER activities of the FeCoPdPtIr@GO synthesized by the FMBP method and loaded onto carbon paper (CP), Pt/C, and pure carbon paper. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (30). (F) Anodic and cathodic polarization curves of the CoFeLaNiPt HEMG catalyst and its individual components, all of which were prepared by the nanodroplet-mediated electrodeposition. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (100). (G) Comparison of the specific activity of electrochemical methanol oxidation using the HEA nanoparticles and the monometallic ones. The arrows show the scan directions of the cyclic voltammetry. Reproduced with permission from the American Chemical Society (34).
Fig. 3 HEAs for electrocatalysis. (A) Adsorption energies of *OH (left) and *O (right) based on DFT calculations, where each color represents an individual binding site. Reproduced with permission from Elsevier (73). (B) Comparison between the predicted OH* adsorption energies and the experimentally measured ORR activities. Reproduced with permission from Elsevier (74). (C) Schematic illustration of the combinatorial and high-throughput synthesis of MMNCs. Reproduced with permission from the National Academy of Sciences (https://creativecommons.org/licenses/by-nc-nd/4.0/) (75). (D) Comparison of the ORR activities (overpotentials at −0.5 V at normalized scale) of individual, binary, ternary, and quinary alloy nanoparticles prepared by the ionic liquid–assisted cosputtering method. Reproduced with permission from John Wiley and Sons (80). (E) The HER activities of the FeCoPdPtIr@GO synthesized by the FMBP method and loaded onto carbon paper (CP), Pt/C, and pure carbon paper. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (30). (F) Anodic and cathodic polarization curves of the CoFeLaNiPt HEMG catalyst and its individual components, all of which were prepared by the nanodroplet-mediated electrodeposition. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (100). (G) Comparison of the specific activity of electrochemical methanol oxidation using the HEA nanoparticles and the monometallic ones. The arrows show the scan directions of the cyclic voltammetry. Reproduced with permission from the American Chemical Society (34).CC BY-NC · PubMed Central
Fig. 4 HEOs for catalysis. (A) XRD patterns showing the structure evolution of the equal molar mixture of MgO, NiO, ZnO, CuO, and CoO annealed in air at different temperatures. The diffraction peaks corresponding to the non–rock salt impurity phases are highlighted using arrows. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (113). (B) Schematics displaying the structures of the high-entropy rock salt, fluorite, and perovskite oxides. Oxygen atoms are in red, and the high-entropy metal sites are in blue/white. A and B sites in the perovskite oxide structures are highlighted in blue/white and green/white, respectively. (C) In situ Cu L2,3 edge XAS spectra of the Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O catalyst in CO at 235°C (red to blue with a 60-min interval) and then switched to the O2 atmosphere at the same temperature (black). Reproduced with permission from the American Chemical Society (48). (D) Thermochemical water splitting performance of (FeMgCoNi)Ox, NiFe2O4, and CoFe2O4 and the calculated thermodynamic limit of CeO2. Reproduced with permission from the Royal Society of Chemistry (121). (E) Methane oxidation performance of 10-MEO-PdO, (Zr,Ce)0.6Mg0.3Pd0.1Ox (4-MEO-Pd), and PdOx supported on carbon paper at 648 K under dry conditions. Reproduced with permission from the Nature Publishing Group (37). (F) Schematic illustration for the mechanochemical synthesis of single Pd atoms supported on (CeZrHfTiLa)Ox and Pd clusters anchored on CeO2. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (31). (G) Temperature-dependent XRD patterns of the Au-HEO sample switched between 700° and 900°C (left) and the magnified in situ XRD intensity map in the first cycle heated from 700° to 900°C (right). Reproduced with permission from the Royal Society of Chemistry (126). a.u., arbitrary units.
Fig. 4 HEOs for catalysis. (A) XRD patterns showing the structure evolution of the equal molar mixture of MgO, NiO, ZnO, CuO, and CoO annealed in air at different temperatures. The diffraction peaks corresponding to the non–rock salt impurity phases are highlighted using arrows. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (113). (B) Schematics displaying the structures of the high-entropy rock salt, fluorite, and perovskite oxides. Oxygen atoms are in red, and the high-entropy metal sites are in blue/white. A and B sites in the perovskite oxide structures are highlighted in blue/white and green/white, respectively. (C) In situ Cu L2,3 edge XAS spectra of the Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O catalyst in CO at 235°C (red to blue with a 60-min interval) and then switched to the O2 atmosphere at the same temperature (black). Reproduced with permission from the American Chemical Society (48). (D) Thermochemical water splitting performance of (FeMgCoNi)Ox, NiFe2O4, and CoFe2O4 and the calculated thermodynamic limit of CeO2. Reproduced with permission from the Royal Society of Chemistry (121). (E) Methane oxidation performance of 10-MEO-PdO, (Zr,Ce)0.6Mg0.3Pd0.1Ox (4-MEO-Pd), and PdOx supported on carbon paper at 648 K under dry conditions. Reproduced with permission from the Nature Publishing Group (37). (F) Schematic illustration for the mechanochemical synthesis of single Pd atoms supported on (CeZrHfTiLa)Ox and Pd clusters anchored on CeO2. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (31). (G) Temperature-dependent XRD patterns of the Au-HEO sample switched between 700° and 900°C (left) and the magnified in situ XRD intensity map in the first cycle heated from 700° to 900°C (right). Reproduced with permission from the Royal Society of Chemistry (126). a.u., arbitrary units.CC BY-NC · PubMed Central
Fig. 5 New high-entropy systems for catalysis. (A) Comparison of the electrochemical resistance of the individual perovskite fluorides and the HEPFs. Reproduced with permission from the American Chemical Society (38). (B) Schematic showing the synthetic pathway toward high-entropy metal nitrides, combining the soft urea strategy with mechanochemistry. Reproduced with permission from John Wiley and Sons (132). (C) Comparison of the OER overpotentials and metal element numbers among unary, binary, ternary, and quaternary sulfides and quinary (CrMnFeCoNi)Sx high-entropy metal sulfides. Reproduced with permission from John Wiley and Sons (39). (D) Yield comparison of cyclic carbonates from CO2 cycloaddition with epoxides catalyzed by the HE-ZIF-BM, single-metal ZIFs (ZIF-8-BM, Cd-ZIF-8, and ZIF-67), and physical mixture of the three single-metal ZIFs (PM-ZIF), respectively. Reproduced with permission from John Wiley and Sons (134). (E) TEM image of the HE-MOF nanosheets and the Tyndall effect highlighted in the inset display good aqueous dispersibility. Reproduced with permission from the Royal Society of Chemistry (135).
Fig. 5 New high-entropy systems for catalysis. (A) Comparison of the electrochemical resistance of the individual perovskite fluorides and the HEPFs. Reproduced with permission from the American Chemical Society (38). (B) Schematic showing the synthetic pathway toward high-entropy metal nitrides, combining the soft urea strategy with mechanochemistry. Reproduced with permission from John Wiley and Sons (132). (C) Comparison of the OER overpotentials and metal element numbers among unary, binary, ternary, and quaternary sulfides and quinary (CrMnFeCoNi)Sx high-entropy metal sulfides. Reproduced with permission from John Wiley and Sons (39). (D) Yield comparison of cyclic carbonates from CO2 cycloaddition with epoxides catalyzed by the HE-ZIF-BM, single-metal ZIFs (ZIF-8-BM, Cd-ZIF-8, and ZIF-67), and physical mixture of the three single-metal ZIFs (PM-ZIF), respectively. Reproduced with permission from John Wiley and Sons (134). (E) TEM image of the HE-MOF nanosheets and the Tyndall effect highlighted in the inset display good aqueous dispersibility. Reproduced with permission from the Royal Society of Chemistry (135).CC BY-NC · PubMed Central
Fig. 6 Outlook for future studies of HEMs for catalysis. (A) Schematic showing future opportunities and challenges in HEMs for catalysis. Advanced synthetic, characterization, and computational techniques will enable further exploration of the enthalpy-entropy correlation in HEMs. (B) Schematic showing the stepwise accumulation of the metal cations on the phenylazomethine dendrimer to prepare the atomically precise Ga1In1Au3Bi2Sn6. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (139). (C) Schematic showing the use of atom probe tomography to map the metal sequence in the multivariate MOF samples. Reproduced with permission from the American Association for the Advancement of Science (140). (D) High-resolution TEM image of the junction in an Au─Co─PdSn nanoparticle (scale bar, 3 nm), where the insets show the ADF-STEM image and corresponding EDS element map of the entire nanoparticle. The FFT patterns corresponding to the Au, Co, and PdSn domains are put at the bottom, and the three phase boundaries are highlighted with dashed lines. Reproduced with permission from the American Association for the Advancement of Science (141). (E) Ionic conductivities of the Li- and Na-doped MgCoNiCuZnOx HEOs at 20° and 80°C, which are notably improved compared with that of the nitrogen doped lithium phosphate glass (LIPON) solid electrolyte. Reproduced with permission from the Royal Society of Chemistry (146). (F) Structure evolution of the CoCrFeMnNi HEA as monitored by the XRD patterns, corresponding to the transition between the initial fcc lattice and the pressured-induced hcp structure. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (148). (G) Faradic efficiencies of the Cu1–xAgx bimetallics with different compositions for electrochemical CO reduction at −0.70 ± 0.01 V versus RHE. Reproduced with permission from the American Association for the Advancement of Science (http://creativecommons.org/licenses/by-nc/4.0/legalcode) (149).
Fig. 6 Outlook for future studies of HEMs for catalysis. (A) Schematic showing future opportunities and challenges in HEMs for catalysis. Advanced synthetic, characterization, and computational techniques will enable further exploration of the enthalpy-entropy correlation in HEMs. (B) Schematic showing the stepwise accumulation of the metal cations on the phenylazomethine dendrimer to prepare the atomically precise Ga1In1Au3Bi2Sn6. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (139). (C) Schematic showing the use of atom probe tomography to map the metal sequence in the multivariate MOF samples. Reproduced with permission from the American Association for the Advancement of Science (140). (D) High-resolution TEM image of the junction in an Au─Co─PdSn nanoparticle (scale bar, 3 nm), where the insets show the ADF-STEM image and corresponding EDS element map of the entire nanoparticle. The FFT patterns corresponding to the Au, Co, and PdSn domains are put at the bottom, and the three phase boundaries are highlighted with dashed lines. Reproduced with permission from the American Association for the Advancement of Science (141). (E) Ionic conductivities of the Li- and Na-doped MgCoNiCuZnOx HEOs at 20° and 80°C, which are notably improved compared with that of the nitrogen doped lithium phosphate glass (LIPON) solid electrolyte. Reproduced with permission from the Royal Society of Chemistry (146). (F) Structure evolution of the CoCrFeMnNi HEA as monitored by the XRD patterns, corresponding to the transition between the initial fcc lattice and the pressured-induced hcp structure. Reproduced with permission from the Nature Publishing Group (http://creativecommons.org/licenses/by/4.0/) (148). (G) Faradic efficiencies of the Cu1–xAgx bimetallics with different compositions for electrochemical CO reduction at −0.70 ± 0.01 V versus RHE. Reproduced with permission from the American Association for the Advancement of Science (http://creativecommons.org/licenses/by-nc/4.0/legalcode) (149).CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 152 references

Cited by

Items 401–500 of 969

Metadata

Authors
Sun, Y., & Dai, S.
Affiliations
Oak Ridge National Laboratory (US)
Corresponding author
Dai, Sheng
Venue
Science Advances
Published
2021-05-14
Volume
7
Issue
20
ISSN
2375-2548 (ISSN-L)
OpenAlex
W3162678041
Cited by
942
References
151
Citations by year
2026: 208 · 2025: 234 · 2024: 238 · 2023: 148 · 2022: 96 · 2021: 18
FWCI
10.58
Type
journal article
Language
en
Open access
Locations
  • Science Advances (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
U.S. Department of Energy
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
Keywords
high-entropy materials, catalysis, configurational entropy, high-entropy alloys, high-entropy oxides, compositional engineering, structural engineering, catalyst design, reaction pathways

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.