CoChat

Hydration layer structure modulates superlubrication by trivalent La 3+ electrolytes

Open access

The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.

Abstract

Water-based lubricants provide lubrication of rubbing surfaces in many technical, biological, and physiological applications. The structure of hydrated ion layers adsorbed on solid surfaces that determine the lubricating properties of aqueous lubricants is thought to be invariable in hydration lubrication. However, we prove that the ion surface coverage dictates the roughness of the hydration layer and its lubricating properties, especially under subnanometer confinement. We characterize different hydration layer structures on surfaces lubricated by aqueous trivalent electrolytes. Two superlubrication regimes are observed with friction coefficients of 10 −4 and 10 −3 , depending on the structure and thickness of the hydration layer. Each regime exhibits a distinct energy dissipation pathway and a different dependence to the hydration layer structure. Our analysis supports the idea of an intimate relationship between the dynamic structure of a boundary lubricant film and its tribological properties and offers a framework to study such relationship at the molecular level.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/sciadv.adf3902

Cites

58 of 58 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1. Hydration forces and lubrication regimes in lanthanide ion solutions. (A) Normal force profile between two curved mica surfaces across La(NO3)3 solutions at 25 mM, 100 mM, 250 mM, and 2 M concentrations. The dashed curves are the exponential fitting, Fn/R ~ exp(−λd−1 D), of the long-range electrostatic repulsion data, with the decay length, λd, of 3.3, 4.5, 6.3, and 10.7 nm with increasing concentrations. The inset represents the SFA setup for normal force measurement. The maximum applied force Fn/R in (A) was smaller than 80 mN/m, which corresponds to Fn < 1.6 mN in the tribological tests. (B) Magnification of the blue area in (A) highlighting the short-range hydration repulsion forces. The experimental decay length of the exponential force law associated with the hydration forces (D < 3 nm) is λhd = 0.24 ± 0.11, 0.12 ± 0.02, and 0.18 ± 0.08 nm at Cs = 0.1, 0.25, and 2 M, respectively. (C) Schematic representation of the SFA setup for measuring normal and friction forces. In this setup, all experimental parameters, Fs, Fn, and D, are measured continuously and simultaneously. (D) Friction traces and the separation distance fluctuations in response to the reciprocating motion of the lower surface across 2 M La(NO3)3 solution at increasing normal loads and a fixed velocity of 3 μm s−1. (E) Friction force measurements recorded at different normal loads across 25 to 2000 mM La(NO3)3 solutions. Different symbols represent independent experiments (different mica pairs and contact points). (F) Evolution of the coefficient of friction and film thickness in the low- and high-friction regimes.
Fig. 1. Hydration forces and lubrication regimes in lanthanide ion solutions. (A) Normal force profile between two curved mica surfaces across La(NO3)3 solutions at 25 mM, 100 mM, 250 mM, and 2 M concentrations. The dashed curves are the exponential fitting, Fn/R ~ exp(−λd−1 D), of the long-range electrostatic repulsion data, with the decay length, λd, of 3.3, 4.5, 6.3, and 10.7 nm with increasing concentrations. The inset represents the SFA setup for normal force measurement. The maximum applied force Fn/R in (A) was smaller than 80 mN/m, which corresponds to Fn < 1.6 mN in the tribological tests. (B) Magnification of the blue area in (A) highlighting the short-range hydration repulsion forces. The experimental decay length of the exponential force law associated with the hydration forces (D < 3 nm) is λhd = 0.24 ± 0.11, 0.12 ± 0.02, and 0.18 ± 0.08 nm at Cs = 0.1, 0.25, and 2 M, respectively. (C) Schematic representation of the SFA setup for measuring normal and friction forces. In this setup, all experimental parameters, Fs, Fn, and D, are measured continuously and simultaneously. (D) Friction traces and the separation distance fluctuations in response to the reciprocating motion of the lower surface across 2 M La(NO3)3 solution at increasing normal loads and a fixed velocity of 3 μm s−1. (E) Friction force measurements recorded at different normal loads across 25 to 2000 mM La(NO3)3 solutions. Different symbols represent independent experiments (different mica pairs and contact points). (F) Evolution of the coefficient of friction and film thickness in the low- and high-friction regimes.CC BY-NC · PubMed Central
Fig. 2. Thick and thin HL regimes have different energy dissipation mechanisms. (A) Evolution of the separation distance with the normal pressure and (B) the friction force with the separation distance across confined La(NO3)3 solutions at different salt concentrations at vs = 3 μm s−1. Velocity-dependent friction forces at different concentrations and at increasing normal loads in the thick (C) and thin (D) HL regimes. In the thick HL regime, the existence of nonzero friction force at zero sliding speed is expected because of weak mechanical coupling between the sliding surface and the spring used to measure the friction force, as reported in previous research (1, 4, 24, 50). Measurements located at the intersection between both regimes seem to be better presented on a logarithmic scale (fig. S10).
Fig. 2. Thick and thin HL regimes have different energy dissipation mechanisms. (A) Evolution of the separation distance with the normal pressure and (B) the friction force with the separation distance across confined La(NO3)3 solutions at different salt concentrations at vs = 3 μm s−1. Velocity-dependent friction forces at different concentrations and at increasing normal loads in the thick (C) and thin (D) HL regimes. In the thick HL regime, the existence of nonzero friction force at zero sliding speed is expected because of weak mechanical coupling between the sliding surface and the spring used to measure the friction force, as reported in previous research (1, 4, 24, 50). Measurements located at the intersection between both regimes seem to be better presented on a logarithmic scale (fig. S10).CC BY-NC · PubMed Central
Fig. 3. Evolution of structural changes at the surface of the hydration layer. (A) HR-AFM topography of cleaved muscovite mica (100) surface in ultrapure water. (B to E) AFM images of mica surfaces in contact with LaNO3 solutions at concentrations ranging from 25 mM to 2 M. (i and ii) The Delaunay triangulation analysis used to analyze the AFM images, identify ion positions, and calculate closest neighbor distance (see section S2). (F) Height fluctuation of hydrated ions at different concentrations across the white line in (B to E). (G) Relative hydrated ion height (representing the average height between the peak and bottom, where Height max and Height ave mean the maximum and average of the height data, respectively) and hydrated ion spacing (representing the average distance between two peaks) as a function of LaNO3 concentration. Error bars represent the SD averaged over five different line profiles (for height data) and each AFM image (for spacing data). The length and width of each AFM image was 10 nm by 10 nm. a.u., arbitrary units.
Fig. 3. Evolution of structural changes at the surface of the hydration layer. (A) HR-AFM topography of cleaved muscovite mica (100) surface in ultrapure water. (B to E) AFM images of mica surfaces in contact with LaNO3 solutions at concentrations ranging from 25 mM to 2 M. (i and ii) The Delaunay triangulation analysis used to analyze the AFM images, identify ion positions, and calculate closest neighbor distance (see section S2). (F) Height fluctuation of hydrated ions at different concentrations across the white line in (B to E). (G) Relative hydrated ion height (representing the average height between the peak and bottom, where Height max and Height ave mean the maximum and average of the height data, respectively) and hydrated ion spacing (representing the average distance between two peaks) as a function of LaNO3 concentration. Error bars represent the SD averaged over five different line profiles (for height data) and each AFM image (for spacing data). The length and width of each AFM image was 10 nm by 10 nm. a.u., arbitrary units.CC BY-NC · PubMed Central
Fig. 4. MD simulation of confined trivalent electrolytes. (A) Variation of Fn with respect to D for La(NO3)3 aqueous solution confined between mica surfaces at 1 to 4 M concentrations. The short dashed curves are exponential fittings using Fn ~ exp(−λh−1 D), where λh = 0.20 ± 0.01, 0.29 ± 0.01, and 0.51 ± 0.01 nm at Cs = 1, 2, and 4 M. The model represents La(NO3)3 aqueous solution between two mica slabs at D = 1.3 nm and Cs = 2 M at equilibrium condition. (B) The local structure of the La3+ hydration shells adsorbed on the mica surface. (C) The La3+ ion density profiles (number of ions per volume) along the normal direction to the mica surfaces at Cs = 1 to 4 M and D = 1.5 nm. (D) The number of water molecules per volume for proximal, distal, and surface water with respect to Cs at D = 1.5 nm. Proximal and distal water molecules are meant to distinguish between molecules forming the hydration shells of ions that are close or further away from the mica surface, respectively, and surface water refers to the molecules in direct contact with the mica surface and not involved in the hydration shell of ions. (E) Comparison between the variation of shear stress τ versus vs = 1 to 15 μm s−1 in SFA experiments (details are in Materials and Methods; Fn = 0.3 mN) and MD simulations at D = 2 nm and Cs = 2 M. (F) Variation of τ with vs = 0.1 to 10 m/s at D = 1 nm and Cs = 2 M.
Fig. 4. MD simulation of confined trivalent electrolytes. (A) Variation of Fn with respect to D for La(NO3)3 aqueous solution confined between mica surfaces at 1 to 4 M concentrations. The short dashed curves are exponential fittings using Fn ~ exp(−λh−1 D), where λh = 0.20 ± 0.01, 0.29 ± 0.01, and 0.51 ± 0.01 nm at Cs = 1, 2, and 4 M. The model represents La(NO3)3 aqueous solution between two mica slabs at D = 1.3 nm and Cs = 2 M at equilibrium condition. (B) The local structure of the La3+ hydration shells adsorbed on the mica surface. (C) The La3+ ion density profiles (number of ions per volume) along the normal direction to the mica surfaces at Cs = 1 to 4 M and D = 1.5 nm. (D) The number of water molecules per volume for proximal, distal, and surface water with respect to Cs at D = 1.5 nm. Proximal and distal water molecules are meant to distinguish between molecules forming the hydration shells of ions that are close or further away from the mica surface, respectively, and surface water refers to the molecules in direct contact with the mica surface and not involved in the hydration shell of ions. (E) Comparison between the variation of shear stress τ versus vs = 1 to 15 μm s−1 in SFA experiments (details are in Materials and Methods; Fn = 0.3 mN) and MD simulations at D = 2 nm and Cs = 2 M. (F) Variation of τ with vs = 0.1 to 10 m/s at D = 1 nm and Cs = 2 M.CC BY-NC · PubMed Central
Fig. 5. Evolution of the hydration layer structure. Schematic representation of the ion distribution in the hydration layer and its evolution with the bulk ion concentration.
Fig. 5. Evolution of the hydration layer structure. Schematic representation of the ion distribution in the hydration layer and its evolution with the bulk ion concentration.CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 1

  1. A. Erdemir J. M. Martin L. Jianbin in Superlubricity A. Erdemir J. M. Martin J. Luo Eds. (Elsevier ed. 2 2021) pp. i-iii.

Cited by

See all 112

Metadata

Authors
Han, T., Cao, W., Xu, Z., Adibnia, V., Olgiati, M., Valtiner, M., Ma, L., Zhang, C., Ma, M., Luo, J., & Banquy, X.
Affiliations
  • State Key Laboratory of Tribology (CN)
  • Tel Aviv University (IL)
  • Université de Montréal (CA)
  • TU Wien (AT)
Corresponding author
  • Han, Tianyi
  • Cao, Wei
  • Zhang, Chenhui
  • Ma, Ming
  • Banquy, Xavier
Venue
Science Advances
Published
2023-07-14
Volume
9
Issue
28
Pages
eadf3902-eadf3902
ISSN
2375-2548 (ISSN-L)
OpenAlex
W4383988553
Cited by
112
References
58
Citations by year
2026: 27 · 2025: 39 · 2024: 44 · 2023: 2
FWCI
11.02
Type
journal article
Language
en
Open access
Licence
cc-by-nc
Locations
  • Science Advances (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
Funders
  • National Natural Science Foundation of China (11772168)
  • China Scholarship Council
  • Natural Sciences and Engineering Research Council of Canada (rgpin-2020-06778)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
  • Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
Keywords
superlubricity, lanthanum ions, aqueous lubricants, friction coefficient, energy dissipation, tribology

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.