The DOI matches its Crossref record.
Micropatterning of Organic Electronic Devices by Cold-Welding
Abstract
A simple and general postdeposition electrode patterning technique for active organic electronic devices is demonstrated and is applied to patterning the metal cathodes of organic light-emitting devices. Selective lift-off of the metal cathode layer is achieved by pressing a prepatterned, metal-coated silicon stamp on the unpatterned device layers. Under pressure, the metal coating on the stamp cold-welds to the metal cathode coating the underlying organic films. Subsequent separation of the stamp from the substrate results in removal of the cathode metal in the regions contacted by the stamp, resulting in submicrometer feature definition. A 17×17 passive matrix display, with a pixel size of 440 micrometers by 320 micrometers, was fabricated with this process. Cold-welding followed by lift-off of the cathode metal allows simple, cost-effective, and high-throughput large-area fabrication of organic electronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The path to ubiquitous and low-cost organic electronic appliances on plastic
Forrest, S. R. (2004) · Nature · doi:10.1038/nature02498 · Cited by 5,165
Self-citationVan der Waals integration before and beyond two-dimensional materials
Liu, Y., Huang, Y., & Duan, X. (2019) · Nature · doi:10.1038/s41586-019-1013-x · Cited by 1,541
Integrated Materials Design of Organic Semiconductors for Field-Effect Transistors
Mei, J., Diao, Y., Appleton, A. L., Fang, L., & Bao, Z. (2013) · Journal of the American Chemical Society · doi:10.1021/ja400881n · Cited by 1,443
Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication
Carlson, A., Bowen, A. M., Huang, Y., Nuzzo, R. G., & Rogers, J. A. (2012) · Advanced Materials · doi:10.1002/adma.201201386 · Cited by 917
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
Menard, E., Meitl, M. A., Sun, Y., Park, J.-U., Shir, D. J.-L., Nam, Y.-S., Jeon, S., & Rogers, J. A. (2007) · Chemical Reviews · doi:10.1021/cr050139y · Cited by 658
Energetics of metal–organic interfaces: New experiments and assessment of the field
Hwang, J., Wan, A., & Kahn, A. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2008.12.001 · Cited by 647
Conductivity in organic semiconductors hybridized with the vacuum field
Orgiu, E., George, J., Hutchison, J. A., Devaux, E., Dayen, J. F., Doudin, B., Stellacci, F., Genet, C., Schachenmayer, J., Genes, C., et al. (2015) · Nature Materials · doi:10.1038/nmat4392 · Cited by 615
Cold welding of ultrathin gold nanowires
Lu, Y., Huang, J. Y., Wang, C., Sun, S., & Lou, J. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.4 · Cited by 523
Advances in 3D nano/microfabrication using two-photon initiated polymerization
Lee, K.-S., Kim, R. H., Yang, D.-Y., & Park, S. H. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.01.001 · Cited by 475
Recent Developments in Polymer MEMS
Liu, C. (2007) · Advanced Materials · doi:10.1002/adma.200701709 · Cited by 422
Cavity-Enhanced Transport of Excitons
Schachenmayer, J., Genes, C., Tignone, E., & Pupillo, G. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.196403 · Cited by 311
Recent advances in microcontact printing
Quist, A. P., Pavlovic, E., & Oscarsson, S. (2005) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2847-z · Cited by 292
Formation of Intermetallic Compounds in Al–Cu Interface via Cold Roll Bonding: Review
Shajari, Y., Akbari, A., Seyedraoufi, Z. S., Porhonar, M., Bakhtiari, H., Razavi, S. H., Abdolmaleki, H., & Khanzadeh, M. R. (2022) · Surface Engineering and Applied Electrochemistry · doi:10.3103/s1068375522010112 · Cited by 12
Metadata
- Authors
- Kim, C., Burrows, P. E., & Forrest, S. R.
- Venue
- Science
- Published
- 2000-05-05
- Volume
- 288
- Issue
- 5467
- Pages
- 831-833
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2073982066
- Cited by
- 239
- References
- 0
- FWCI
- 7.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.