The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Open accessAbstract
Perovskites go large: Solar cells made of planar organic-inorganic perovskites now have reported efficiencies exceeding 20%. However, these values have been determined from small illuminated areas. Chen et al. used highly doped inorganic charge extraction layers to make solar cells on the 1 cm 2 scale (see the Perspective by Sessolo and Bolink). The layers helped to protect the active layer from degradation by air. The cells achieved governmentlab–certified efficiencies of >15%. Furthermore, 90% of the efficiency was maintained after 1000 hours of operation. Science , this issue p. 944 ; see also p. 917
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Self-citationEfficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Self-citationSolvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Self-citationSolar cell efficiency tables (Version 45)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2573 · Cited by 2,440
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Self-citationElectro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Energy‐Level Alignment at Organic/Metal and Organic/Organic Interfaces
Braun, S., Salaneck, W. R., & Fahlman, M. (2009) · Advanced Materials · doi:10.1002/adma.200802893 · Cited by 1,593
Perovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Kim, Y. H., Sachse, C., Machala, M. L., May, C., Müller‐Meskamp, L., & Leo, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002290 · Cited by 1,458
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Hodes, G. (2013) · Science · doi:10.1126/science.1245473 · Cited by 805
A transparent metal: Nb-doped anatase TiO2
Furubayashi, Y., Hitosugi, T., Yamamoto, Y., Inaba, K., Kinoda, G., Hirose, Y., Shimada, T., & Hasegawa, T. (2005) · Applied Physics Letters · doi:10.1063/1.1949728 · Cited by 801
Sub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency
Wojciechowski, K., Saliba, M., Leijtens, T., Abate, A., & Snaith, H. J. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43707h · Cited by 592
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Solar cell efficiency tables (version 46)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2637 · Cited by 528
Heo, J. H., Song, D. H., Han, H. J., Kim, S. Y., Kim, J. H., Kim, D., Shin, H. W., Ahn, T. K., Wolf, C., Lee, T., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500048 · Cited by 474
Zhu, Z., Bai, Y., Zhang, T., Liu, Z., Long, X., Wei, Z., Wang, Z., Zhang, L., Wang, J., Yan, F., et al. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405176 · Cited by 457
Air‐Stable Polymer Electronic Devices
Lee, K., Kim, J. Y., Park, S. H., Kim, S. H., Cho, S., & Heeger, A. J. (2007) · Advanced Materials · doi:10.1002/adma.200602653 · Cited by 403
Li, X., Tschumi, M., Han, H., Babkair, S. S., Alzubaydi, R. A., Ansari, A. A., Habib, S. S., Nazeeruddin, M. K., Zakeeruddin, S. M., & Grätzel, M. (2015) · Energy Technology · doi:10.1002/ente.201500045 · Cited by 379
Self-citationHybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells
Chen, W., Wu, Y., Liu, J., Qin, C., Yang, X., Islam, A., Cheng, Y.-B., & Han, L. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02833c · Cited by 319
Self-citationThe promise and challenge of nanostructured solar cells
Beard, M. C., Luther, J. M., & Nozik, A. J. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.292 · Cited by 207
Malinkiewicz, O., Roldán‐Carmona, C., Soriano, A., Bandiello, E., Camacho, L., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400345 · Cited by 186
Kuwabara, T., Nakayama, T., Uozumi, K., Yamaguchi, T., & Takahashi, K. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.06.012 · Cited by 168
Liu, J., Shirai, Y., Yang, X., Yue, Y., Chen, W., Wu, Y., Islam, A., & Han, L. (2015) · Advanced Materials · doi:10.1002/adma.201501489 · Cited by 150
Self-citationMoehl, T., Im, J. H., Lee, Y. H., Domanski, K., Giordano, F., Zakeeruddin, S. M., Dar, M. I., Heiniger, L., Nazeeruddin, M. K., Park, N., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502039k · Cited by 114
Self-citationAlidoust, N., Toroker, M. C., Keith, J. A., & Carter, E. A. (2013) · ChemSusChem · doi:10.1002/cssc.201300595 · Cited by 69
Chia-Ching, W., & Yang, C. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.09.017 · Cited by 61
Bringing solar cell efficiencies into the light
(2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.206 · Cited by 16
Chen, X., Huang, H.-M., Li, X., Liu, G., & Zhang, H. (2015) · PubMed Central · Cited by 7
Cited by
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Self-citationSurface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Self-citationHigh-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent
Lin, K., Xing, J., Quan, L. N., de Arquer, F. P. G., Gong, X., Lu, J., Xie, L., Zhao, W., Zhang, D., Yan, C., et al. (2018) · Nature · doi:10.1038/s41586-018-0575-3 · Cited by 3,355
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Metadata
- Authors
- Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., & Han, L.
- Venue
- Science
- Published
- 2015-11-20
- Volume
- 350
- Issue
- 6263
- Pages
- 944-948
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W1927627425
- Cited by
- 2,279
- References
- 37
- FWCI
- 155.89
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.