The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells
Abstract
A stable perovskite heterojunction was constructed for inverted solar cells through surface sulfidation of lead (Pb)–rich perovskite films. The formed lead-sulfur (Pb-S) bonds upshifted the Fermi level at the perovskite interface and induced an extra back-surface field for electron extraction. The resulting inverted devices exhibited a power conversion efficiency (PCE) >24% with a high open-circuit voltage of 1.19 volts, corresponding to a low voltage loss of 0.36 volts. The strong Pb-S bonds could stabilize perovskite heterojunctions and strengthen underlying perovskite structures that have a similar crystal lattice. Devices with surface sulfidation retained more than 90% of the initial PCE after aging at 85°C for 2200 hours or operating at the maximum power point under continuous illumination for 1000 hours at 55° ± 5°C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Self-citationShao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Efficient perovskite solar cells via improved carrier management
Yoo, J. J., Seo, G., Chua, M. R., Park, T. G., Lu, Y., Rotermund, F., Kim, Y.-K., Moon, C. S., Jeon, N. J., Correa-Baena, J.-P., et al. (2021) · Nature · doi:10.1038/s41586-021-03285-w · Cited by 2,934
Hines, M. A., & Scholes, G. D. (2003) · Advanced Materials · doi:10.1002/adma.200305395 · Cited by 1,827
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationPlanar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Amat, A., Mosconi, E., Ronca, E., Quarti, C., Umari, P., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2014) · Nano Letters · doi:10.1021/nl5012992 · Cited by 1,285
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Li, N., Tao, S., Chen, Y., Niu, X., Onwudinanti, C. K., Hu, C., Qiu, Z., Xu, Z., Zheng, G., Wang, L., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0382-6 · Cited by 1,167
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Vapor-assisted deposition of highly efficient, stable black-phase FAPbI 3 perovskite solar cells
Lu, H., Liu, Y., Ahlawat, P., Mishra, A., Tress, W. R., Eickemeyer, F. T., Yang, Y., Fu, F., Wang, Z., Avalos, C. E., et al. (2020) · Science · doi:10.1126/science.abb8985 · Cited by 815
Self-citationStabilizing black-phase formamidinium perovskite formation at room temperature and high humidity
Hui, W., Chao, L., Lu, H., Xia, F., Wei, Q., Su, Z., Niu, T., Tao, L., Du, B., Li, D., et al. (2021) · Science · doi:10.1126/science.abf7652 · Cited by 806
Revealing the role of organic cations in hybrid halide perovskite CH3NH3PbI3
Motta, C., El-Mellouhi, F., Kais, S., Tabet, N., Alharbi, F., & Sanvito, S. (2015) · Nature Communications · doi:10.1038/ncomms8026 · Cited by 670
Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth
Jang, Y.-W., Lee, S., Yeom, K. M., Jeong, K., Choi, K., Choi, M., & Noh, J. H. (2021) · Nature Energy · doi:10.1038/s41560-020-00749-7 · Cited by 605
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Quantum-dot-in-perovskite solids
Ning, Z., Gong, X., Comin, R., Walters, G., Fan, F., Voznyy, O., Yassitepe, E., Buin, A., Hoogland, S., & Sargent, E. H. (2015) · Nature · doi:10.1038/nature14563 · Cited by 591
Stabilizing heterostructures of soft perovskite semiconductors
Wang, Y., Wu, T., Barbaud, J., Kong, W., Cui, D., Chen, H., Yang, X., & Han, L. (2019) · Science · doi:10.1126/science.aax8018 · Cited by 585
Defects engineering for high-performance perovskite solar cells
Wang, F., Bai, S., Tress, W., Hagfeldt, A., & Gao, F. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0035-z · Cited by 568
Almora, O., Aranda, C., Mas-Marzá, E., & Garcia-Belmonte, G. (2016) · Applied Physics Letters · doi:10.1063/1.4966127 · Cited by 543
Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells
Guerrero, A., You, J., Aranda, C., Kang, Y. S., Garcia-Belmonte, G., Zhou, H., Bisquert, J., & Yang, Y. (2016) · ACS Nano · doi:10.1021/acsnano.5b03687 · Cited by 520
Leijtens, T., Stranks, S. D., Eperon, G. E., Lindblad, R., Johansson, E. M. J., McPherson, I. J., Rensmo, H., Ball, J. M., Lee, M. M., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn502115k · Cited by 426
Xiong, S., Hou, Z., Zou, S., Lu, X., Yang, J., Hao, T., Zhou, Z., Xu, J., Zeng, Y., Xiao, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.12.009 · Cited by 402
Ionic Reactivity at Contacts and Aging of Methylammonium Lead Triiodide Perovskite Solar Cells
Carrillo, J., Guerrero, A., Rahimnejad, S., Almora, O., Zarazua, I., Mas‐Marza, E., Bisquert, J., & Garcia‐Belmonte, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502246 · Cited by 339
Li, X., Zhang, W., Wang, Y.-C., Zhang, W., Wang, H.-Q., & Fang, J. (2018) · Nature Communications · doi:10.1038/s41467-018-06204-2 · Cited by 329
Self-citationAligned and Graded Type‐II Ruddlesden–Popper Perovskite Films for Efficient Solar Cells
Qing, J., Liu, X., Li, M., Liu, F., Yuan, Z., Tiukalova, E., Yan, Z., Duchamp, M., Chen, S., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800185 · Cited by 300
Lattice anchoring stabilizes solution-processed semiconductors
Liu, M., Chen, Y., Tan, C.-S., Quintero-Bermudez, R., Proppe, A. H., Munir, R., Tan, H., Voznyy, O., Scheffel, B., Walters, G., et al. (2019) · Nature · doi:10.1038/s41586-019-1239-7 · Cited by 294
Fu, S., Li, X., Wan, L., Wu, Y., Zhang, W., Wang, Y., Bao, Q., & Fang, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901852 · Cited by 198
Self-citationChemical anti-corrosion strategy for stable inverted perovskite solar cells
Li, X., Fu, S., Zhang, W., Ke, S., Song, W., & Fang, J. (2020) · Science Advances · doi:10.1126/sciadv.abd1580 · Cited by 180
Self-citationHydrogen Bonding and Stability of Hybrid Organic–Inorganic Perovskites
El‐Mellouhi, F., Marzouk, A., Bentria, E. T., Rashkeev, S. N., Kais, S., & Alharbi, F. H. (2016) · ChemSusChem · doi:10.1002/cssc.201600864 · Cited by 150
Li, X., Liu, X., Wang, X., Zhao, L., Jiu, T., & Fang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04712a · Cited by 128
Self-citationEperon, G. E., Moerman, D., & Ginger, D. S. (2016) · ACS Nano · doi:10.1021/acsnano.6b05825 · Cited by 91
Spontaneous grain polymerization for efficient and stable perovskite solar cells
Li, X., Zhang, W., Zhang, W., Wang, H., & Fang, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.02.009 · Cited by 85
Self-citationSuppressing the ions-induced degradation for operationally stable perovskite solar cells
Li, X., Fu, S., Liu, S., Wu, Y., Zhang, W., Song, W., & Fang, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103962 · Cited by 78
Self-citation
Cited by
Minimizing buried interfacial defects for efficient inverted perovskite solar cells
Zhang, S., Ye, F., Wang, X., Chen, R., Zhang, H., Zhan, L., Jiang, X., Li, Y., Ji, X., Liu, S., et al. (2023) · Science · doi:10.1126/science.adg3755 · Cited by 1,159
Surface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Metadata
- Authors
- Li, X., Zhang, W., Guo, X., Lu, C., Wei, J., & Fang, J.
- Venue
- Science
- Published
- 2022-01-28
- Volume
- 375
- Issue
- 6579
- Pages
- 434-437
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4210727748
- Cited by
- 907
- References
- 34
- FWCI
- 53.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.