The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin
Open accessAbstract
CrCoNi-based medium- and high-entropy alloys display outstanding damage tolerance, especially at cryogenic temperatures. In this study, we examined the fracture toughness values of the equiatomic CrCoNi and CrMnFeCoNi alloys at 20 kelvin (K). We found exceptionally high crack-initiation fracture toughnesses of 262 and 459 megapascal-meters ½ (MPa·m ½ ) for CrMnFeCoNi and CrCoNi, respectively; CrCoNi displayed a crack-growth toughness exceeding 540 MPa·m ½ after 2.25 millimeters of stable cracking. Crack-tip deformation structures at 20 K are quite distinct from those at higher temperatures. They involve nucleation and restricted growth of stacking faults, fine nanotwins, and transformed epsilon martensite, with coherent interfaces that can promote both arrest and transmission of dislocations to generate strength and ductility. We believe that these alloys develop fracture resistance through a progressive synergy of deformation mechanisms, dislocation glide, stacking-fault formation, nanotwinning, and phase transformation, which act in concert to prolong strain hardening that simultaneously elevates strength and ductility, leading to exceptional toughness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationGeorge, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Self-citationMetastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Self-citationOtto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Self-citationWu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Self-citationExceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Self-citationHigh entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationLaplanche, G., Kostka, A., Reinhart, C., Hunfeld, J., Eggeler, G., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.036 · Cited by 1,379
Self-citationShort-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
Self-citationMicrostructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Self-citationTensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Self-citationMechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Self-citationHigh-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Self-citationTunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
Ding, J., Yu, Q., Asta, M., & Ritchie, R. O. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1808660115 · Cited by 845
Self-citationTemperature Dependence of the Elastic Constants
Varshni, Y. P. (1970) · Physical Review B · doi:10.1103/physrevb.2.3952 · Cited by 792
Zhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms14390 · Cited by 664
Self-citationThe evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
Miao, J., Slone, C. E., Smith, T. M., Niu, C., Bei, H., Ghazisaeidi, M., Pharr, G. M., & Mills, M. J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.033 · Cited by 539
Laplanche, G., Gadaud, P., Horst, O., Otto, F., Eggeler, G., & George, E. P. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.061 · Cited by 467
Self-citationLocal Structure and Short-Range Order in a NiCoCr Solid Solution Alloy
Zhang, F. X., Zhao, S., Jin, K., Xue, H., Velisa, G., Bei, H., Huang, R., Ko, J. Y. P., Pagan, D. C., Neuefeind, J. C., et al. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.205501 · Cited by 451
Chen, S., Oh, H. S., Gludovatz, B., Kim, S. J., Park, E. S., Zhang, Z., Ritchie, R. O., & Yu, Q. (2020) · Nature Communications · doi:10.1038/s41467-020-14641-1 · Cited by 424
Self-citationMagnetically-driven phase transformation strengthening in high entropy alloys
Niu, C., LaRosa, C. R., Miao, J., Mills, M. J., & Ghazisaeidi, M. (2018) · Nature Communications · doi:10.1038/s41467-018-03846-0 · Cited by 393
Stacking fault energy in concentrated alloys
Shih, M., Miao, J., Mills, M., & Ghazisaeidi, M. (2021) · Nature Communications · doi:10.1038/s41467-021-23860-z · Cited by 326
Cooperative deformation in high-entropy alloys at ultralow temperatures
Naeem, M., He, H., Zhang, F., Huang, H., Harjo, S., Kawasaki, T., Wang, B., Lan, S., Wu, Z., Wang, F., et al. (2020) · Science Advances · doi:10.1126/sciadv.aax4002 · Cited by 323
Yield strength and misfit volumes of NiCoCr and implications for short-range-order
Yin, B., Yoshida, S., Tsuji, N., & Curtin, W. A. (2020) · Nature Communications · doi:10.1038/s41467-020-16083-1 · Cited by 311
Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy
Gludovatz, B., George, E. P., & Ritchie, R. O. (2015) · JOM · doi:10.1007/s11837-015-1589-z · Cited by 254
Self-citationCryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy
Lin, Q., Liu, J., An, X., Wang, H., Zhang, Y., & Liao, X. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1434250 · Cited by 251
Liu, J., Guo, X., Lin, Q., He, Z., An, X., Li, L., Liaw, P. K., Liao, X., Yu, L., Lin, J., et al. (2018) · Science China Materials · doi:10.1007/s40843-018-9373-y · Cited by 247
Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
Haglund, A., Koehler, M., Catoor, D., George, E. P., & Keppens, V. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.11.005 · Cited by 196
Self-citationHigh impact toughness of CrCoNi medium-entropy alloy at liquid-helium temperature
Yang, M., Zhou, L., Wang, C., Jiang, P., Yuan, F., Ma, E., & Wu, X. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.07.010 · Cited by 152
Filho, F. D. C. G., Ritchie, R. O., Meyers, M. A., & Monteiro, S. N. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.118 · Cited by 138
Self-citationDeformation behavior of a Co-Cr-Fe-Ni-Mo medium-entropy alloy at extremely low temperatures
Moon, J., Tabachnikova, E. D., Shumilin, S. E., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2021.08.001 · Cited by 137
Stacking Fault Driven Phase Transformation in CrCoNi Medium Entropy Alloy
He, H., Naeem, M., Zhang, F., Zhao, Y., Harjo, S., Kawasaki, T., Wang, B., Wu, X., Lan, S., Wu, Z., et al. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04244 · Cited by 125
Can experiment determine the stacking fault energy of metastable alloys?
Sun, X., Lu, S., Xie, R., An, X., Li, W., Zhang, T., Liang, C., Ding, X., Wang, Y., Zhang, H., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109396 · Cited by 121
Kawamura, M., Asakura, M., Okamoto, N. L., Kishida, K., Inui, H., & George, E. P. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.10.073 · Cited by 106
Self-citationLi, L., Chen, Z., Kuroiwa, S., Ito, M., Kishida, K., Inui, H., & George, E. P. (2021) · International Journal of Plasticity · doi:10.1016/j.ijplas.2021.103144 · Cited by 94
Self-citationGeorge, E. P., & Ritchie, R. O. (2022) · MRS Bulletin · doi:10.1557/s43577-022-00285-7 · Cited by 54
Self-citationYu, P., Du, J.-P., Shinzato, S., Meng, F.-S., & Ogata, S. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117504 · Cited by 48
Cited by
Clarifying the four core effects of high-entropy materials
Hsu, W.-L., Tsai, C.-W., Yeh, A.-C., & Yeh, J.-W. (2024) · Nature Reviews Chemistry · doi:10.1038/s41570-024-00602-5 · Cited by 928
Yu, H., Díaz, A., Lu, X., Sun, B., Ding, Y., Koyama, M., He, J., Zhou, X., Oudriss, A., Feaugas, X., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00624 · Cited by 405
A 3D printable alloy designed for extreme environments
Smith, T. M., Kantzos, C. A., Zarkevich, N. A., Harder, B. J., Heczko, M., Gradl, P. R., Thompson, A. C., Mills, M. J., Gabb, T. P., & Lawson, J. W. (2023) · Nature · doi:10.1038/s41586-023-05893-0 · Cited by 269
High-entropy alloy electrocatalysts go to (sub-)nanoscale
Li, M., Lin, F., Zhang, S., Zhao, R., Tao, L., Li, L., Li, J., Zeng, L., Luo, M., & Guo, S. (2024) · Science Advances · doi:10.1126/sciadv.adn2877 · Cited by 177
Metadata
- Authors
- Liu, D., Yu, Q., Kabra, S., Jiang, M., Forna-Kreutzer, P., Zhang, R., Payne, M., Walsh, F., Gludovatz, B., Asta, M., Minor, A. M., George, E. P., & Ritchie, R. O.
- Venue
- Science
- Published
- 2022-12-02
- Volume
- 378
- Issue
- 6623
- Pages
- 978-983
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4310700150
- Cited by
- 543
- References
- 42
- FWCI
- 37.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.