The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells
Open accessAbstract
Realizing solution-processed heterostructures is a long-enduring challenge in halide perovskites because of solvent incompatibilities that disrupt the underlying layer. By leveraging the solvent dielectric constant and Gutmann donor number, we could grow phase-pure two-dimensional (2D) halide perovskite stacks of the desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. Characterization reveals a 3D–2D transition region of 20 nanometers mainly determined by the roughness of the bottom 3D layer. Thickness dependence of the 2D perovskite layer reveals the anticipated trends for n-i-p and p-i-n architectures, which is consistent with band alignment and carrier transport limits for 2D perovskites. We measured a photovoltaic efficiency of 24.5%, with exceptional stability of T99(time required to preserve 99% of initial photovoltaic efficiency) of >2000 hours, implying that the 3D/2D bilayer inherits the intrinsic durability of 2D perovskite without compromising efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Consistent Equations Including Exchange and Correlation Effects
Kohn, W., & Sham, L. J. (1965) · Physical Review · doi:10.1103/physrev.140.a1133 · Cited by 64,135
Efficient pseudopotentials for plane-wave calculations
Troullier, N., & Martins, J. L. (1991) · Physical Review B · doi:10.1103/physrevb.43.1993 · Cited by 16,148
The SIESTA method for ab initio order-N materials simulation
Soler, J. M., Artacho, E., Gale, J. D., García, A., Junquera, J., Ordejón, P., & Sánchez-Portal, D. (2002) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/14/11/302 · Cited by 12,218
The Scherrer Formula for X-Ray Particle Size Determination
Patterson, A. L. (1939) · Physical Review · doi:10.1103/physrev.56.978 · Cited by 9,152
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Self-citationKhenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Structural Relaxation Made Simple
Bitzek, E., Koskinen, P., Gähler, F., Moseler, M., & Gumbsch, P. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.170201 · Cited by 1,755
Cited by
Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Self-citationLong-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells
Park, S. M., Wei, M., Xu, J., Atapattu, H. R., Eickemeyer, F. T., Darabi, K., Grater, L., Yang, Y., Liu, C., Teale, S., et al. (2023) · Science · doi:10.1126/science.adi4107 · Cited by 492
Self-citationDouble-side 2D/3D heterojunctions for inverted perovskite solar cells
Azmi, R., Utomo, D. S., Vishal, B., Zhumagali, S., Dally, P., Risqi, A. M., Prasetio, A., Ugur, E., Cao, F., Imran, I. F., et al. (2024) · Nature · doi:10.1038/s41586-024-07189-3 · Cited by 452
Achievements, challenges, and future prospects for industrialization of perovskite solar cells
Yang, C., Hu, W., Liu, J., Han, C., Gao, Q., Mei, A., Zhou, Y., Guo, F., & Han, H. (2024) · Light: Science & Applications · doi:10.1038/s41377-024-01461-x · Cited by 388
Metadata
- Authors
- Sidhik, S., Wang, Y., De Siena, M., Asadpour, R., Torma, A. J., Terlier, T., Ho, K., Li, W., Puthirath, A. B., Shuai, X., Agrawal, A., Traore, B., Jones, M., Giridharagopal, R., Ajayan, P. M., Strzalka, J., Ginger, D. S., Katan, C., Alam, M. A., Even, J., Kanatzidis, M. G., & Mohite, A. D.
- Venue
- Science
- Published
- 2022-09-23
- Volume
- 377
- Issue
- 6613
- Pages
- 1425-1430
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4296766770
- Cited by
- 563
- References
- 51
- FWCI
- 30.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells. https://app.cochat.ai/papers/10.1126/science.abq7652
- The paper
- Sidhik, S., Wang, Y., De Siena, M., Asadpour, R., Torma, A. J., Terlier, T., Ho, K., Li, W., Puthirath, A. B., Shuai, X., Agrawal, A., Traore, B., Jones, M., Giridharagopal, R., Ajayan, P. M., Strzalka, J., Ginger, D. S., Katan, C., Alam, M. A., . . . Mohite, A. D. (2022). Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells. Science. https://doi.org/10.1126/science.abq7652
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.