The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells
Open accessAbstract
Realizing solution-processed heterostructures is a long-enduring challenge in halide perovskites because of solvent incompatibilities that disrupt the underlying layer. By leveraging the solvent dielectric constant and Gutmann donor number, we could grow phase-pure two-dimensional (2D) halide perovskite stacks of the desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. Characterization reveals a 3D–2D transition region of 20 nanometers mainly determined by the roughness of the bottom 3D layer. Thickness dependence of the 2D perovskite layer reveals the anticipated trends for n-i-p and p-i-n architectures, which is consistent with band alignment and carrier transport limits for 2D perovskites. We measured a photovoltaic efficiency of 24.5%, with exceptional stability of T99(time required to preserve 99% of initial photovoltaic efficiency) of >2000 hours, implying that the 3D/2D bilayer inherits the intrinsic durability of 2D perovskite without compromising efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Consistent Equations Including Exchange and Correlation Effects
Kohn, W., & Sham, L. J. (1965) · Physical Review · doi:10.1103/physrev.140.a1133 · Cited by 64,135
Efficient pseudopotentials for plane-wave calculations
Troullier, N., & Martins, J. L. (1991) · Physical Review B · doi:10.1103/physrevb.43.1993 · Cited by 16,148
The SIESTA method for ab initio order-N materials simulation
Soler, J. M., Artacho, E., Gale, J. D., García, A., Junquera, J., Ordejón, P., & Sánchez-Portal, D. (2002) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/14/11/302 · Cited by 12,218
The Scherrer Formula for X-Ray Particle Size Determination
Patterson, A. L. (1939) · Physical Review · doi:10.1103/physrev.56.978 · Cited by 9,152
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Self-citationKhenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Structural Relaxation Made Simple
Bitzek, E., Koskinen, P., Gähler, F., Moseler, M., & Gumbsch, P. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.170201 · Cited by 1,755
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Surface photovoltage phenomena: theory, experiment, and applications
Kronik, L. (1999) · Surface Science Reports · doi:10.1016/s0167-5729(99)00002-3 · Cited by 1,648
Modeling photocurrent action spectra of photovoltaic devices based on organic thin films
Pettersson, L. A. A., Roman, L. S., & Inganäs, O. (1999) · Journal of Applied Physics · doi:10.1063/1.370757 · Cited by 1,642
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Solvent effects on the reactivities of organometallic compounds
Gutmann, V. (1976) · Coordination Chemistry Reviews · doi:10.1016/s0010-8545(00)82045-7 · Cited by 975
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., et al. (2022) · Science · doi:10.1126/science.abm5784 · Cited by 855
Liu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors
Smilgies, D. (2009) · Journal of Applied Crystallography · doi:10.1107/s0021889809040126 · Cited by 707
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth
Jang, Y.-W., Lee, S., Yeom, K. M., Jeong, K., Choi, K., Choi, M., & Noh, J. H. (2021) · Nature Energy · doi:10.1038/s41560-020-00749-7 · Cited by 605
Cubic Perovskite Structure of Black Formamidinium Lead Iodide, α-[HC(NH2)2]PbI3, at 298 K
Weller, M. T., Weber, O. J., Frost, J. M., & Walsh, A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01432 · Cited by 580
deQuilettes, D. W., Koch, S., Burke, S., Paranji, R. K., Shropshire, A. J., Ziffer, M. E., & Ginger, D. S. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00236 · Cited by 548
Self-citationSurface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Approximation to density functional theory for the calculation of band gaps of semiconductors
Ferreira, L. G., Marques, M., & Teles, L. K. (2008) · Physical Review B · doi:10.1103/physrevb.78.125116 · Cited by 526
Van der Waals density functional: An appropriate exchange functional
Cooper, V. R. (2010) · Physical Review B · doi:10.1103/physrevb.81.161104 · Cited by 520
Braly, I. L., deQuilettes, D. W., Pazos-Outón, L. M., Burke, S., Ziffer, M. E., Ginger, D. S., & Hillhouse, H. W. (2018) · Nature Photonics · doi:10.1038/s41566-018-0154-z · Cited by 517
Self-citationGoldburg, W. I. (1999) · American Journal of Physics · doi:10.1119/1.19101 · Cited by 515
Wang, F., Jiang, X., Chen, H., Shang, Y., Liu, H., Wei, J., Zhou, W., He, H., Liu, W., & Ning, Z. (2018) · Joule · doi:10.1016/j.joule.2018.09.012 · Cited by 481
Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells
Zhang, F., Park, S. Y., Yao, C., Lu, H., Dunfield, S. P., Xiao, C., Uličná, S., Zhao, X., Du Hill, L., Chen, X., et al. (2022) · Science · doi:10.1126/science.abj2637 · Cited by 466
Charge transfer rates and electron trapping at buried interfaces of perovskite solar cells
Levine, I., Al-Ashouri, A., Musiienko, A., Hempel, H., Magomedov, A., Drevilkauskaite, A., Getautis, V., Menzel, D., Hinrichs, K., Unold, T., et al. (2021) · Joule · doi:10.1016/j.joule.2021.07.016 · Cited by 461
Influence of Solvent Coordination on Hybrid Organic–Inorganic Perovskite Formation
Hamill, J. C., Schwartz, J., & Loo, Y.-L. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01057 · Cited by 451
23.7% Efficient inverted perovskite solar cells by dual interfacial modification
Degani, M., An, Q., Albaladejo-Siguan, M., Hofstetter, Y. J., Cho, C., Paulus, F., Grancini, G., & Vaynzof, Y. (2021) · Science Advances · doi:10.1126/sciadv.abj7930 · Cited by 446
Phase Pure 2D Perovskite for High‐Performance 2D–3D Heterostructured Perovskite Solar Cells
Li, P., Zhang, Y., Liang, C., Xing, G., Liu, X., Li, F., Liu, X., Hu, X., Shao, G., & Song, Y. (2018) · Advanced Materials · doi:10.1002/adma.201805323 · Cited by 339
Comparative van der Waals density-functional study of graphene on metal surfaces
Hamada, I., & Otani, M. (2010) · Physical Review B · doi:10.1103/physrevb.82.153412 · Cited by 317
Billing, D. G., & Lemmerer, A. (2007) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768107031758 · Cited by 309
Spanopoulos, I., Hadar, I., Ke, W., Tu, Q., Chen, M., Tsai, H., He, Y., Shekhawat, G., Dravid, V. P., Wasielewski, M. R., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b01327 · Cited by 284
Self-citationWang, J., Fu, W., Jariwala, S., Sinha, I., Jen, A. K.-Y., & Ginger, D. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02058 · Cited by 215
Self-citationSutanto, A. A., Caprioglio, P., Drigo, N., Hofstetter, Y. J., Garcia-Benito, I., Queloz, V. I. E., Neher, D., Nazeeruddin, M. K., Stolterfoht, M., Vaynzof, Y., et al. (2021) · Chem · doi:10.1016/j.chempr.2021.04.002 · Cited by 215
Exciton diffusion in two-dimensional metal-halide perovskites
Seitz, M., Magdaleno, A. J., Alcázar-Cano, N., Meléndez, M., Lubbers, T. J., Walraven, S. W., Pakdel, S., Prada, E., Delgado-Buscalioni, R., & Prins, F. (2020) · Nature Communications · doi:10.1038/s41467-020-15882-w · Cited by 201
Mahmud, M. A., Duong, T., Peng, J., Wu, Y., Shen, H., Walter, D., Nguyen, H. T., Mozaffari, N., Tabi, G. D., Catchpole, K. R., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202009164 · Cited by 192
Li, G., Song, J., Wu, J., Song, Z., Wang, X., Sun, W., Fan, L., Lin, J., Huang, M., Lan, Z., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01649 · Cited by 180
Spiro-OMeTAD single crystals: Remarkably enhanced charge-carrier transport via mesoscale ordering
Shi, D., Qin, X., Li, Y., He, Y., Zhong, C., Pan, J., Dong, H., Xu, W., Li, T., Hu, W., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501491 · Cited by 167
Zhang, T., Long, M., Qin, M., Lu, X., Chen, S., Xie, F., Gong, L., Chen, J., Chu, M., Miao, Q., et al. (2018) · Joule · doi:10.1016/j.joule.2018.09.022 · Cited by 164
Jiang, Z., Li, X., Strzalka, J. W., Sprung, M., Sun, T., Sandy, A., Narayanan, S., Lee, D. R., & Wang, J. (2012) · Journal of Synchrotron Radiation · doi:10.1107/s0909049512022017 · Cited by 124
Self-citationFernández-Seivane, L., Oliveira, M. A. S., Sanvito, S., & Ferrer, J. (2006) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/18/34/012 · Cited by 122
Memory Seeds Enable High Structural Phase Purity in 2D Perovskite Films for High‐Efficiency Devices
Sidhik, S., Li, W., Samani, M. H. K., Zhang, H., Wang, Y., Hoffman, J. M., Fehr, A., Wong, M. S., Katan, C., Even, J., et al. (2021) · Advanced Materials · doi:10.1002/adma.202007176 · Cited by 101
Self-citationTowards an accurate description of perovskite ferroelectrics: exchange and correlation effects
Yuk, S. F., Pitike, K. C., Nakhmanson, S., Eisenbach, M., Li, Y. W., & Cooper, V. R. (2017) · Scientific Reports · doi:10.1038/srep43482 · Cited by 91
Hamill, J. C., Romiluyi, O., Thomas, S. A., Cetola, J., Schwartz, J., Toney, M. F., Clancy, P., & Loo, Y. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c03465 · Cited by 68
Tailoring Phase Purity in the 2D/3D Perovskite Heterostructures Using Lattice Mismatch
Xiong, M., Zou, W., Fan, K., Qin, C., Li, S., Fei, L., Jiang, J., Huang, H., Shen, L., Gao, F., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02580 · Cited by 62
Giridharagopal, R., Precht, J. T., Jariwala, S., Collins, L. F., Jesse, S., Kalinin, S. V., & Ginger, D. S. (2019) · ACS Nano · doi:10.1021/acsnano.8b08390 · Cited by 60
Self-citationSidhik, S., Wang, Y., Li, W., Zhang, H., Zhong, X., Agrawal, A., Hadar, I., Spanopoulos, I., Mishra, A., Traoré, B., et al. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100601 · Cited by 37
Self-citation
Cited by
Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Self-citationLong-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells
Park, S. M., Wei, M., Xu, J., Atapattu, H. R., Eickemeyer, F. T., Darabi, K., Grater, L., Yang, Y., Liu, C., Teale, S., et al. (2023) · Science · doi:10.1126/science.adi4107 · Cited by 492
Self-citationDouble-side 2D/3D heterojunctions for inverted perovskite solar cells
Azmi, R., Utomo, D. S., Vishal, B., Zhumagali, S., Dally, P., Risqi, A. M., Prasetio, A., Ugur, E., Cao, F., Imran, I. F., et al. (2024) · Nature · doi:10.1038/s41586-024-07189-3 · Cited by 452
Achievements, challenges, and future prospects for industrialization of perovskite solar cells
Yang, C., Hu, W., Liu, J., Han, C., Gao, Q., Mei, A., Zhou, Y., Guo, F., & Han, H. (2024) · Light: Science & Applications · doi:10.1038/s41377-024-01461-x · Cited by 388
Metadata
- Authors
- Sidhik, S., Wang, Y., De Siena, M., Asadpour, R., Torma, A. J., Terlier, T., Ho, K., Li, W., Puthirath, A. B., Shuai, X., Agrawal, A., Traore, B., Jones, M., Giridharagopal, R., Ajayan, P. M., Strzalka, J., Ginger, D. S., Katan, C., Alam, M. A., Even, J., Kanatzidis, M. G., & Mohite, A. D.
- Venue
- Science
- Published
- 2022-09-23
- Volume
- 377
- Issue
- 6613
- Pages
- 1425-1430
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4296766770
- Cited by
- 563
- References
- 51
- FWCI
- 30.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.