The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Reducing nonradiative recombination in perovskite solar cells with a porous insulator contact
Abstract
Inserting an ultrathin low-conductivity interlayer between the absorber and transport layer has emerged as an important strategy for reducing surface recombination in the best perovskite solar cells. However, a challenge with this approach is a trade-off between the open-circuit voltage ( V oc ) and the fill factor (FF). Here, we overcame this challenge by introducing a thick (about 100 nanometers) insulator layer with random nanoscale openings. We performed drift-diffusion simulations for cells with this porous insulator contact (PIC) and realized it using a solution process by controlling the growth mode of alumina nanoplates. Leveraging a PIC with an approximately 25% reduced contact area, we achieved an efficiency of up to 25.5% (certified steady-state efficiency 24.7%) in p-i-n devices. The product of V oc × FF was 87.9% of the Shockley-Queisser limit. The surface recombination velocity at the p-type contact was reduced from 64.2 to 9.2 centimeters per second. The bulk recombination lifetime was increased from 1.2 to 6.0 microseconds because of improvements in the perovskite crystallinity. The improved wettability of the perovskite precursor solution allowed us to demonstrate a 23.3% efficient 1-square-centimeter p-i-n cell. We demonstrate here its broad applicability for different p-type contacts and perovskite compositions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Efficient perovskite solar cells via improved carrier management
Yoo, J. J., Seo, G., Chua, M. R., Park, T. G., Lu, Y., Rotermund, F., Kim, Y.-K., Moon, C. S., Jeon, N. J., Correa-Baena, J.-P., et al. (2021) · Nature · doi:10.1038/s41586-021-03285-w · Cited by 2,934
Yoshikawa, K., Kawasaki, H., Yoshida, W., Irie, T., Konishi, K., Nakano, K., Uto, T., Adachi, D., Kanematsu, M., Uzu, H., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.32 · Cited by 2,692
Photovoltaic materials: Present efficiencies and future challenges
Polman, A., Knight, M., Garnett, E. C., Ehrler, B., & Sinke, W. C. (2016) · Science · doi:10.1126/science.aad4424 · Cited by 2,328
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Self-citation23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Self-citationEnhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationFast charge separation in a non-fullerene organic solar cell with a small driving force
Liu, J., Chen, S., Qian, D., Gautam, B., Yang, G., Zhao, J., Bergqvist, J., Zhang, F., Ma, W., Ade, H., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.89 · Cited by 1,392
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
All-perovskite tandem solar cells with improved grain surface passivation
Lin, R., Xu, J., Wei, M., Wang, Y., Qin, Z., Liu, Z., Wu, J., Xiao, K., Chen, B., Park, S. M., et al. (2022) · Nature · doi:10.1038/s41586-021-04372-8 · Cited by 1,085
Self-citationTriple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Self-citationOrganometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Self-citationPimpinelli, A., & Villain, J. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511622526 · Cited by 1,014
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells
Li, X., Zhang, W., Guo, X., Lu, C., Wei, J., & Fang, J. (2022) · Science · doi:10.1126/science.abl5676 · Cited by 907
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., et al. (2022) · Science · doi:10.1126/science.abm5784 · Cited by 855
The path to 25% silicon solar cell efficiency: History of silicon cell evolution
Green, M. A. (2009) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.892 · Cited by 737
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Passivating contacts for crystalline silicon solar cells
Allen, T. G., Bullock, J., Yang, X., Javey, A., & Wolf, S. D. (2019) · Nature Energy · doi:10.1038/s41560-019-0463-6 · Cited by 674
Li, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09845 · Cited by 655
Self-citationTress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells
Chen, H., Teale, S., Chen, B., Hou, Y., Grater, L., Zhu, T., Bertens, K., Park, S. M., Atapattu, H. R., Gao, Y., et al. (2022) · Nature Photonics · doi:10.1038/s41566-022-00985-1 · Cited by 588
Photoluminescence‐Based Characterization of Halide Perovskites for Photovoltaics
Kirchartz, T., Márquez, J. A., Stolterfoht, M., & Unold, T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904134 · Cited by 572
Caprioglio, P., Stolterfoht, M., Wolff, C. M., Unold, T., Rech, B., Albrecht, S., & Neher, D. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901631 · Cited by 557
deQuilettes, D. W., Koch, S., Burke, S., Paranji, R. K., Shropshire, A. J., Ziffer, M. E., & Ginger, D. S. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00236 · Cited by 548
High-performance perovskite/Cu(In,Ga)Se 2 monolithic tandem solar cells
Han, Q., Hsieh, Y.-T., Meng, L., Wu, J.-L., Sun, P., Yao, E.-P., Chang, S.-Y., Bae, S.-H., Kato, T., Bermudez, V., et al. (2018) · Science · doi:10.1126/science.aat5055 · Cited by 451
Sproul, A. B. (1994) · Journal of Applied Physics · doi:10.1063/1.357521 · Cited by 433
Stable and low-photovoltage-loss perovskite solar cells by multifunctional passivation
Yang, G., Ren, Z., Liu, K., Qin, M., Deng, W., Zhang, H., Wang, H., Liang, J., Ye, F., Liang, Q., et al. (2021) · Nature Photonics · doi:10.1038/s41566-021-00829-4 · Cited by 417
Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility
Li, N., Niu, X., Li, L., Wang, H., Huang, Z., Zhang, Y., Chen, Y., Zhang, X., Zhu, C., Zai, H., et al. (2021) · Science · doi:10.1126/science.abh3884 · Cited by 413
Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells
Peng, J., Walter, D., Ren, Y., Tebyetekerwa, M., Wu, Y., Duong, T., Lin, Q., Li, J., Lu, T., Mahmud, M. A., et al. (2021) · Science · doi:10.1126/science.abb8687 · Cited by 409
Wu, S., Zhang, J., Li, Z., Liu, D., Qin, M., Cheung, S. H., Lu, X., Lei, D., So, S. K., Zhu, Z., et al. (2020) · Joule · doi:10.1016/j.joule.2020.04.001 · Cited by 388
Self-citationHow the formation of interfacial charge causes hysteresis in perovskite solar cells
Weber, S. A. L., Hermes, I. M., Turren-Cruz, S.-H., Gort, C., Bergmann, V. W., Gilson, L., Hagfeldt, A., Graetzel, M., Tress, W., & Berger, R. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01447g · Cited by 377
On the Origin of the Ideality Factor in Perovskite Solar Cells
Caprioglio, P., Wolff, C. M., Sandberg, O. J., Armin, A., Rech, B., Albrecht, S., Neher, D., & Stolterfoht, M. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000502 · Cited by 377
Light-induced annihilation of Frenkel defects in organo-lead halide perovskites
Mosconi, E., Meggiolaro, D., Snaith, H. J., Stranks, S. D., & De Angelis, F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01504b · Cited by 372
Luo, C., Zheng, G., Gao, F., Wang, X., Zhao, Y., Gao, X., & Zhao, Q. (2022) · Joule · doi:10.1016/j.joule.2021.12.006 · Cited by 336
Cao, Q., Li, Y., Zhang, H., Yang, J., Han, J., Xu, T., Wang, S., Wang, Z., Gao, B., Zhao, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg0633 · Cited by 322
Iodine reduction for reproducible and high-performance perovskite solar cells and modules
Chen, S., Xiao, X., Gu, H., & Huang, J. (2021) · Science Advances · doi:10.1126/sciadv.abe8130 · Cited by 312
Gharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture
Koushik, D., Verhees, W. J. H., Kuang, Y., Veenstra, S., Zhang, D., Verheijen, M. A., Creatore, M., & Schropp, R. E. I. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02687g · Cited by 285
Tong, J., Jiang, Q., Ferguson, A. J., Palmstrom, A. F., Wang, X., Hao, J., Dunfield, S. P., Louks, A. E., Harvey, S. P., Li, C., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01046-1 · Cited by 284
Self-citationPark, B.-W., Kwon, H. W., Lee, Y., Lee, D. Y., Kim, M. G., Kim, G., Kim, K.-J., Kim, Y. K., Im, J., Shin, T. J., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00802-z · Cited by 263
Excess charge-carrier induced instability of hybrid perovskites
Lin, Y., Chen, B., Fang, Y., Zhao, J., Bao, C., Yu, Z., Deng, Y., Rudd, P. N., Yan, Y., Yuan, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-07438-w · Cited by 251
Reverse Bias Behavior of Halide Perovskite Solar Cells
Bowring, A. R., Bertoluzzi, L., O'Regan, B. C., & McGehee, M. D. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702365 · Cited by 221
Self-citationWang, J., Fu, W., Jariwala, S., Sinha, I., Jen, A. K.-Y., & Ginger, D. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02058 · Cited by 215
Dielectric Response: Answer to Many Questions in the Methylammonium Lead Halide Solar Cell Absorbers
Anusca, I., Balčiūnas, S., Gemeiner, P., Svirskas, Š., Sanlialp, M., Lackner, G., Fettkenhauer, C., Belovickis, J., Samulionis, V., Ivanov, M., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700600 · Cited by 209
Bertoluzzi, L., Boyd, C. C., Rolston, N., Xu, J., Prasanna, R., O’Regan, B. C., & McGehee, M. D. (2020) · Joule · doi:10.1016/j.joule.2019.10.003 · Cited by 199
Self-citationLi, X., Wu, X., Li, B., Cen, Z., Shang, Y., Lian, W., Cao, R., Jia, L., Li, Z., Gao, D., et al. (2022) · Energy & Environmental Science · doi:10.1039/d2ee02543d · Cited by 196
Self-citationKrogmeier, B., Staub, F., Grabowski, D., Rau, U., & Kirchartz, T. (2018) · Sustainable Energy & Fuels · doi:10.1039/c7se00603a · Cited by 183
Crothers, T. W., Milot, R. L., Patel, J. B., Parrott, E. S., Schlipf, J., Müller-Buschbaum, P., Johnston, M. B., & Herz, L. M. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02834 · Cited by 172
Jacobs, D. A., Shen, H., Pfeffer, F., Peng, J., White, T. P., Beck, F. J., & Catchpole, K. R. (2018) · Journal of Applied Physics · doi:10.1063/1.5063259 · Cited by 171
The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell
Yang, Y., Ri, K., Mei, A., Liu, L., Hu, M., Liu, T., Li, X., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07030e · Cited by 168
Low‐Bandgap Organic Bulk‐Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells
Wu, S., Li, Z., Zhang, J., Wu, X., Deng, X., Liu, Y., Zhou, J., Zhi, C., Yu, X., Choy, W. C. H., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105539 · Cited by 159
Self-citationFang, Z., Wang, L., Mu, X., Chen, B., Xiong, Q., Wang, W. D., Ding, J., Gao, P., Wu, Y., & Cao, J. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c07518 · Cited by 151
On the dielectric properties of dc magnetron TiO2 thin films
Stamate, M. D. (2003) · Applied Surface Science · doi:10.1016/s0169-4332(03)00624-x · Cited by 124
Mechanochemistry Advances High‐Performance Perovskite Solar Cells
Zhang, Y., Wang, Y., Yang, X., Zhao, L., Su, R., Wu, J., Luo, D., Li, S., Chen, P., Yu, M., et al. (2021) · Advanced Materials · doi:10.1002/adma.202107420 · Cited by 117
Wu, X., Gao, D., Sun, X., Zhang, S., Wang, Q., Li, B., Li, Z., Qin, M., Jiang, X., Zhang, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202208431 · Cited by 107
Self-citationCrystal-array-assisted growth of a perovskite absorption layer for efficient and stable solar cells
Shen, Z., Han, Q., Luo, X., Shen, Y., Wang, T., Zhang, C., Wang, Y., Chen, H., Yang, X., Zhang, Y., et al. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02897a · Cited by 101
Xiong, Q., Wang, C., Zhou, Q., Wang, L., Wang, X., Yang, L., Ding, J., Chen, C., Wu, J., Li, X., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107823 · Cited by 100
Jariwala, S., Burke, S. A., Dunfield, S. P., Shallcross, R. C., Taddei, M., Wang, J., Eperon, G. E., Armstrong, N. R., Berry, J. J., & Ginger, D. S. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c00848 · Cited by 69
Stable perovskite solar cells with 23.12% efficiency and area over 1 cm2 by an all-in-one strategy
Su, H., Lin, X., Wang, Y., Liu, X., Qin, Z., Shi, Q., Han, Q., Zhang, Y., & Han, L. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1244-y · Cited by 52
Cited by
Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands
Chen, H., Liu, C., Xu, J., Maxwell, A., Zhou, W., Yang, Y., Zhou, Q., Bati, A. S. R., Wan, H., Wang, Z., et al. (2024) · Science · doi:10.1126/science.adm9474 · Cited by 1,389
Self-citationStabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Self-citationJiang, Y., Sun, S., Xu, R., Liu, F., Miao, X., Ran, G., Liu, K., Yi, Y., Zhang, W., & Zhu, X. (2024) · Nature Energy · doi:10.1038/s41560-024-01557-z · Cited by 813
Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells
Liu, C., Yang, Y., Chen, H., Xu, J., Liu, A., Bati, A. S. R., Zhu, H., Grater, L., Hadke, S. S., Huang, C., et al. (2023) · Science · doi:10.1126/science.adk1633 · Cited by 757
Self-citationSolar cell efficiency tables (Version 63)
Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., & Hao, X. (2024) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3750 · Cited by 588
Metadata
- Authors
- Peng, W., Mao, K., Cai, F., Meng, H., Zhu, Z., Li, T., Yuan, S., Xu, Z., Feng, X., Xu, J., McGehee, M. D., & Xu, J.
- Venue
- Science
- Published
- 2023-02-17
- Volume
- 379
- Issue
- 6633
- Pages
- 683-690
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4321018370
- Cited by
- 666
- References
- 65
- FWCI
- 48.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.