The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions
Open accessAbstract
If perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs) are to be commercialized, they must achieve long-term stability, which is usually assessed with accelerated degradation tests. One of the persistent obstacles for PSCs has been successfully passing the damp-heat test (85°C and 85% relative humidity), which is the standard for verifying the stability of commercial photovoltaic (PV) modules. We fabricated damp heat–stable PSCs by tailoring the dimensional fragments of two-dimensional perovskite layers formed at room temperature with oleylammonium iodide molecules; these layers passivate the perovskite surface at the electron-selective contact. The resulting inverted PSCs deliver a 24.3% PCE and retain >95% of their initial value after >1000 hours at damp-heat test conditions, thereby meeting one of the critical industrial stability standards for PV modules.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics
Wang, R., Xue, J., Wang, K.-L., Wang, Z.-K., Luo, Y., Fenning, D., Xu, G., Nuryyeva, S., Huang, T., Zhao, Y., et al. (2019) · Science · doi:10.1126/science.aay9698 · Cited by 1,339
Al-Ashouri, A., Magomedov, A., Roß, M., Jošt, M., Talaikis, M., Chistiakova, G., Bertram, T., Márquez, J. A., Köhnen, E., Kasparavičius, E., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02268f · Cited by 1,214
Cited by
Double-side 2D/3D heterojunctions for inverted perovskite solar cells
Azmi, R., Utomo, D. S., Vishal, B., Zhumagali, S., Dally, P., Risqi, A. M., Prasetio, A., Ugur, E., Cao, F., Imran, I. F., et al. (2024) · Nature · doi:10.1038/s41586-024-07189-3 · Cited by 452
Self-citationLi, H., Zhang, C., Gong, C., Zhang, D., Zhang, H., Zhuang, Q., Yu, X., Gong, S., Chen, X., Yang, J., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01295-8 · Cited by 404
Stability of 2D and quasi-2D perovskite materials and devices
Leung, T. L., Ahmad, I., Syed, A. A., Ng, A. M. C., Popović, J., & Djurišić, A. B. (2022) · Communications Materials · doi:10.1038/s43246-022-00285-9 · Cited by 279
Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment
Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., et al. (2024) · Science · doi:10.1126/science.adn9453 · Cited by 152
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Self-citation
Metadata
- Authors
- Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., Chen, Y., Xu, F., Allen, T. G., Rehman, A. U., Wang, C.-L., Anthopoulos, T. D., Schwingenschlögl, U., De Bastiani, M., Aydin, E., & De Wolf, S.
- Venue
- Science
- Published
- 2022-04
- Volume
- 376
- Issue
- 6588
- Pages
- 73-77
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4213346436
- Cited by
- 855
- References
- 34
- FWCI
- 49.25
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions. https://app.cochat.ai/papers/10.1126/science.abm5784
- The paper
- Azmi, R., Ugur, E., Seitkhan, A., Aljamaan, F., Subbiah, A. S., Liu, J., Harrison, G. T., Nugraha, M. I., Eswaran, M. K., Babics, M., Chen, Y., Xu, F., Allen, T. G., Rehman, A. U., Wang, C.-L., Anthopoulos, T. D., Schwingenschlögl, U., De Bastiani, M., Aydin, E., & De Wolf, S. (2022). Damp heat–stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions. Science. https://doi.org/10.1126/science.abm5784
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
