The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Lead-chelating hole-transport layers for efficient and stable perovskite minimodules
Open accessAbstract
The defective bottom interfaces of perovskites and hole-transport layers (HTLs) limit the performance of p-i-n structure perovskite solar cells. We report that the addition of lead chelation molecules into HTLs can strongly interact with lead(II) ion (Pb 2+ ), resulting in a reduced amorphous region in perovskites near HTLs and a passivated perovskite bottom surface. The minimodule with an aperture area of 26.9 square centimeters has a power conversion efficiency (PCE) of 21.8% (stabilized at 21.1%) that is certified by the National Renewable Energy Laboratory (NREL), which corresponds to a minimal small-cell efficiency of 24.6% (stabilized 24.1%) throughout the module area. Small-area cells and large-area minimodules with lead chelation molecules in HTLs had a light soaking stability of 3010 and 2130 hours, respectively, at an efficiency loss of 10% from the initial value under 1-sun illumination and open-circuit voltage conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Self-citationPlanar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Inactive (PbI 2 ) 2 RbCl stabilizes perovskite films for efficient solar cells
Zhao, Y., Ma, F., Qu, Z., Yu, S., Shen, T., Deng, H.-X., Chu, X., Peng, X., Yuan, Y., Zhang, X., et al. (2022) · Science · doi:10.1126/science.abp8873 · Cited by 1,445
Conformal quantum dot–SnO 2 layers as electron transporters for efficient perovskite solar cells
Kim, M., Jeong, J., Lu, H., Lee, T. K., Eickemeyer, F. T., Liu, Y., Choi, I. W., Choi, S. J., Jo, Y., Kim, H.-B., et al. (2022) · Science · doi:10.1126/science.abh1885 · Cited by 1,346
Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells
Ni, Z., Bao, C., Liu, Y., Jiang, Q., Wu, W.-Q., Chen, S., Dai, X., Chen, B., Hartweg, B., Yu, Z., et al. (2020) · Science · doi:10.1126/science.aba0893 · Cited by 1,302
Self-citationSurface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
Self-citationMethylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Turren-Cruz, S.-H., Hagfeldt, A., & Saliba, M. (2018) · Science · doi:10.1126/science.aat3583 · Cited by 1,055
Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Self-citation
Cited by
Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Highly efficient and stable perovskite solar cells via a multifunctional hole transporting material
Zhou, J., Tan, L., Liu, Y., Li, H., Liu, X., Li, M., Wang, S., Zhang, Y., Jiang, C., Hua, R., et al. (2024) · Joule · doi:10.1016/j.joule.2024.02.019 · Cited by 735
Rapid advances enabling high-performance inverted perovskite solar cells
Jiang, Q., & Zhu, K. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00678-x · Cited by 410
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Wang, M., Shi, Z., Fei, C., Deng, Z. J. D., Yang, G., Dunfield, S. P., Fenning, D. P., & Huang, J. (2023) · Nature Energy · doi:10.1038/s41560-023-01362-0 · Cited by 253
Self-citationReconfigurable perovskite X-ray detector for intelligent imaging
Pang, J., Wu, H., Li, H., Jin, T., Tang, J., & Niu, G. (2024) · Nature Communications · doi:10.1038/s41467-024-46184-0 · Cited by 110
Qiu, M., Li, W., Luo, Y., Zhao, C., Zhao, Z., & Mai, W. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202418064 · Cited by 15
Metadata
- Authors
- Fei, C., Li, N., Wang, M., Wang, X., Gu, H., Chen, B., Zhang, Z., Ni, Z., Jiao, H., Xu, W., Shi, Z., Yan, Y., & Huang, J.
- Venue
- Science
- Published
- 2023-05-26
- Volume
- 380
- Issue
- 6647
- Pages
- 823-829
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4378194809
- Cited by
- 372
- References
- 39
- FWCI
- 27.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.