CoChat

Graphene-polymer reinforcement of perovskite lattices for durable solar cells

Li, Qing, Zheng, Yichu, Wang, Haonan, Liu, Xinyi, Lin, Miaoyu, Sui, Xinyuan, Leng, Xuesong, Liu, Da, Wei, Zhanpeng, Song, Mengyao, Li, Dongdong, Yang, Hua Gui, Yang, Shuang, Hou, Yu · 2025 · Science
Cited by 216

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

The lattice deformation and structural evolution of perovskite films in response to electric fields, temperature, and light limit the operational endurance of solar cells. We mechanically reinforced perovskite thin films by integrating a polymer-coupled monolithic single-layer graphene interface that led to a twofold enhancement in modulus and hardness. The synergistic effect of graphene and poly(methyl methacrylate) restricted photoinduced lattice expansion and decreased the deformation ratio from 0.31 to 0.08%, which minimized the structural damage caused by dynamic lattice evolution. Solar cell devices maintained >97% of their initial power conversion efficiency after maximum power point tracking for >3670 hours under full-spectrum air mass 1.5 global (AM 1.5 G) sunlight at 90°C.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/science.adu5563

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Metadata

Authors
Li, Q., Zheng, Y., Wang, H., Liu, X., Lin, M., Sui, X., Leng, X., Liu, D., Wei, Z., Song, M., Li, D., Yang, H. G., Yang, S., & Hou, Y.
Venue
Science
Published
2025-03-07
Volume
387
Issue
6738
Pages
1069-1077
ISSN
  • 0036-8075 (ISSN-L)
  • 1095-9203
OpenAlex
W4408182239
Cited by
216
References
1
FWCI
49.22
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Graphene-polymer reinforcement of perovskite lattices for durable solar cells. https://app.cochat.ai/papers/10.1126/science.adu5563
The paper
Li, Q., Zheng, Y., Wang, H., Liu, X., Lin, M., Sui, X., Leng, X., Liu, D., Wei, Z., Song, M., Li, D., Yang, H. G., Yang, S., & Hou, Y. (2025). Graphene-polymer reinforcement of perovskite lattices for durable solar cells. Science. https://doi.org/10.1126/science.adu5563

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.