The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment
Abstract
The ever-increasing power conversion efficiency of perovskite solar cells has illuminated the future of the photovoltaic industry, but the development of commercial devices is hampered by their poor stability. In this study, we report a scalable stabilization method using vapor-phase fluoride treatment, which achieves 18.1%-efficient solar modules (228 square centimeters) with accelerated aging–projected T 80 lifetimes (time to 80% of efficiency remaining) of 43,000 ± 9000 hours under 1-sun illumination at 30°C. The high stability results from vapor-enabled homogeneous fluorine passivation over large-area perovskite surfaces, suppressing defect formation energy and ion diffusion. The extracted degradation activation energy of 0.61 electron volts for solar modules is comparable to that of most reported stable cells, which indicates that modules are not inherently less stable than cells and closes the cell-to-module stability gap.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“yet their operational instability remains a critical barrier to practical deployment”
From Multimodal electron microscopy of halide perovskite interfacial dynamics (2026) · cites this paper as [12]
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
Imperfections and their passivation in halide perovskite solar cells
Chen, B., Rudd, P. N., Yang, S., Yuan, Y., & Huang, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00853a · Cited by 1,959
Khenkin, M. V., Katz, E. A., Abate, A., Bardizza, G., Berry, J. J., Brabec, C., Brunetti, F., Bulović, V., Burlingame, Q., Di Carlo, A., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0529-5 · Cited by 1,803
Cited by
Graphene-polymer reinforcement of perovskite lattices for durable solar cells
Li, Q., Zheng, Y., Wang, H., Liu, X., Lin, M., Sui, X., Leng, X., Liu, D., Wei, Z., Song, M., et al. (2025) · Science · doi:10.1126/science.adu5563 · Cited by 216
Vapor-assisted surface reconstruction enables outdoor-stable perovskite solar modules
Sun, X., Shi, W., Liu, T., Cheng, J., Wang, X., Xu, P., Zhang, W., Zhao, X., & Guo, W. (2025) · Science · doi:10.1126/science.adv4280 · Cited by 109
Self-citationDiverse Perovskite Solar Cells: Progress, Challenges, and Perspectives
Zhang, L., Zhang, M., Wang, H., Li, Z., Zhang, Z., Song, Y., Song, X. L., Wang, S., Chen, J., Li, W., et al. (2025) · Advanced Materials · doi:10.1002/adma.202512221 · Cited by 92
Self-citationYuan, L., Xue, Q., Wang, F., Li, N., Waterhouse, G. I. N., Brabec, C. J., Gao, F., & Yan, K. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00663 · Cited by 88
Suo, J., Pettersson, H., & Yang, B. (2025) · EcoMat · doi:10.1002/eom2.12511 · Cited by 71
“Moreover, the stability of PSCs has also been significantly enhanced [2–6], meeting various industry-standard tests, including long-term maximum power point tracking under continuous one-sun illumination, damp heat (85% humidity, 85°C), and temperature cycling tests ( − 40°C to 85°C).”
Metadata
- Authors
- Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., Zhang, Z., & Guo, W.
- Affiliations
- Nanjing University of Aeronautics and Astronautics (CN)
- University of Cambridge (GB)
- Corresponding author
- Zhao, Xiaoming
- Zhang, Peikun
- Liu, Tianjun
- Zhang, Zhuhua
- Guo, Wanlin
- ORCID
- Venue
- Science
- Published
- 2024-07-26
- Volume
- 385
- Issue
- 6707
- Pages
- 433-438
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W4400974284
- Semantic Scholar
- e8325b34a27421fa0c4b8d236ca81167896a31ff
- Cited by
- 152
- References
- 70
- Citations by year
- 2026: 57 · 2025: 82 · 2024: 13
- FWCI
- 15.77
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Science (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Keywords
- perovskite solar modules, device stability, activation energy of degradation, defect formation energy, accelerated aging, power conversion efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment. https://app.cochat.ai/papers/10.1126/science.adn9453
- The paper
- Zhao, X., Zhang, P., Liu, T., Tian, B., Jiang, Y., Zhang, J., Tang, Y., Li, B., Xue, M., Zhang, W., Zhang, Z., & Guo, W. (2024). Operationally stable perovskite solar modules enabled by vapor-phase fluoride treatment. Science. https://doi.org/10.1126/science.adn9453
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.