In situ biodegradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in natural waters
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The biodegradation of samples of poly(3-hydroxybutyrate) (P(3HB)), poly(3-hydroxybutyrate-co-10%-3-hydroxyvalerate) (P(3HB-co-10%-3HV)), and poly(3-hydroxybutyrate-co-20%-3-hydroxyvalerate) (P(3HB-co-20%-3HV)) was investigated in situ in natural waters. The degradation was studied by decrease in mass, molecular weight, and tensile strength. In two freshwater ponds the polymers were slowly degraded. After half a year of submersion the mass loss was less than 7%. After 358 days in a freshwater canal, 34% mass loss was recorded for the homopolymer, and 77% for the P(3HB-co-10%-3-HV) samples, while the P(3HB-co-20%-3HV) samples had completely disappeared. In seawater in the harbour of Zeebrugge, P(3HB) samples lost 31% of their initial mass, and the copolymers 49–52%, within 270 days. In all of these environments, the degradation rate was faster during the summer, when the temperature of the water was higher. No relevant changes in molecular weight could be detected, indicating that the degradation took place only at the surface of the samples. The degradation resulted in considerable loss of tensile strength of the copolymer samples. Ninety-two microorganisms, mainly bacteria, able to degrade P(3HB) in polymer overlayer plates, were isolated and identified by fatty acid analysis. The isolates from one freshwater pond belonged mainly to the bacterial genus Acidovorax, while the microorganisms from the other freshwater pond belonged to various bacterial genera, to Streptomyces, and to the mould genus Penicillium. Most of the 31 bacterial isolates from seawater were identified as Alteromonas haloplanktis. The results demonstrate that P(3HB) and P(3HB-co-3HV) samples are effectively biodegradable in natural waters under real-life conditions and reveal the biodiversity of the microflora responsible for this biodegradation.Key words: poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), biodegradation, seawater, freshwater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Doi, Y., Kanesawa, Y., Kunioka, M., & Saito, T. (1990) · Macromolecules · doi:10.1021/ma00203a006 · Cited by 515
Brandl, H., & P�chner, P. (1992) · Biodegradation · doi:10.1007/bf00114555 · Cited by 67
Cited by
The pollution of the marine environment by plastic debris: a review.
Derraik, J. G. B. (2002) · Marine Pollution Bulletin · doi:10.1016/s0025-326x(02)00220-5 · Cited by 4,042
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
Metabolic Engineering of Poly(3-Hydroxyalkanoates): From DNA to Plastic
Madison, L. L., & Huisman, G. W. (1999) · Microbiology and Molecular Biology Reviews · doi:10.1128/mmbr.63.1.21-53.1999 · Cited by 1,600
Meereboer, K. W., Misra, M., & Mohanty, A. K. (2020) · Green Chemistry · doi:10.1039/d0gc01647k · Cited by 965
Lifetime prediction of biodegradable polymers
Laycock, B., Nikolić, M., Colwell, J. M., Gauthier, E., Halley, P., Bottle, S., & George, G. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.004 · Cited by 662
Seawater‐Degradable Polymers—Fighting the Marine Plastic Pollution
Wang, G., Huang, D., Ji, J., Völker, C., & Wurm, F. R. (2021) · Advanced Science · doi:10.1002/advs.202001121 · Cited by 440
Fate of So‐Called Biodegradable Polymers in Seawater and Freshwater
Bagheri, A. R., Laforsch, C., Greiner, A., & Agarwal, S. (2017) · Global Challenges · doi:10.1002/gch2.201700048 · Cited by 389
Muhammadi, Shabina, Afzal, M., & Hameed, S. (2015) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2015.1109715 · Cited by 357
Study of microbes having potentiality for biodegradation of plastics
Ghosh, S. K., Pal, S., & Ray, S. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-1706-x · Cited by 305
Suzuki, M., Tachibana, Y., & Kasuya, K.-I. (2021) · Polymer Journal · doi:10.1038/s41428-020-00396-5 · Cited by 293
The rate of biodegradation of PHA bioplastics in the marine environment: A meta-study
Dilkes-Hoffman, L. S., Lant, P. A., Laycock, B., & Pratt, S. (2019) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2019.03.020 · Cited by 280
Volova, T. G., Boyandin, A. N., Vasiliev, A. D., Karpov, V. A., Prudnikova, S. V., Mishukova, O. V., Boyarskikh, U. A., Filipenko, M. L., Rudnev, V. P., Bá Xuân, B., et al. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.08.023 · Cited by 275
Biodegradabilities of various aliphatic polyesters in natural waters
Kasuya, K.-I., Takagi, K.-I., Ishiwatari, S.-I., Yoshida, Y., & Doi, Y. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00155-9 · Cited by 266
Khan, S. T., Horiba, Y., Yamamoto, M., & Hiraishi, A. (2002) · Applied and Environmental Microbiology · doi:10.1128/aem.68.7.3206-3214.2002 · Cited by 253
Jendrossek, D. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00190-0 · Cited by 95
Field and mesocosm methods to test biodegradable plastic film under marine conditions
Lott, C., Eich, A., Unger, B., Makarow, D., Battagliarin, G., Schlegel, K., Lasut, M. T., & Weber, M. (2020) · PLoS ONE · doi:10.1371/journal.pone.0236579 · Cited by 73
Wing Hong, L., & Yu, J. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11354 · Cited by 18
Taguchi, S., Iwata, T., Abe, H., Doi, Y., & Aqida, S. N. (2016) · Reference Module in Materials Science and Materials Engineering · doi:10.1016/b978-0-12-803581-8.09806-4 · Cited by 15
Metadata
- Authors
- Mergaert, J., Wouters, A., Swings, J., & Anderson, C.
- Venue
- Canadian Journal of Microbiology
- Publisher
- Canadian Science Publishing
- Published
- 1995-12-15
- Volume
- 41
- Issue
- 13
- Pages
- 154-159
- ISSN
- 0008-4166 (ISSN-L)
- 1480-3275
- OpenAlex
- W2019569872
- Cited by
- 112
- References
- 2
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.