Piezoelectric Windmill: A Novel Solution to Remote Sensing
Open accessThe DOI matches its Crossref record.
Abstract
This study demonstrates a technology, “Piezoelectric Windmill”, for generating the electrical power from wind energy. The electric power-generation from wind energy is based on piezoelectric effect and utilizes the bimorph actuators. Piezoelectric Windmill consists of piezoelectric actuators arranged along the circumference of the mill in the cantilever form. Using the camshaft gear mechanism an oscillating torque is generated through the flowing wind and applied on the actuators. A working prototype was fabricated utilizing 12 bimorphs (60 ×20 ×0.5 mm 3) having a preload of 23.5 gm. Under a nominal torque level corresponding to normal wind flow and oscillating frequency of 6 Hz, a power of 10.2 mW was successfully measured across a load of 4.6 kΩ after rectification. Combined with the wireless transmission, this technology provides a practical solution to the remote powering of sensors and communication devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
Advances in energy harvesting using low profile piezoelectric transducers
Priya, S. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9043-4 · Cited by 918
Self-citationSafaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“The original work on piezoelectric energy harvesting using a windmill-style device was presented by Priya et al in 2005 [316, 317] (shown in figure 8(a)).”
BackgroundMethodInfluentialAnalysis of power output for piezoelectric energy harvesting systems
Shu, Y. C., & Lien, I. C. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/001 · Cited by 737
Shen, D., Park, J.-H., Ajitsaria, J., Choe, S.-Y., Wikle, H. C., & Kim, D.-J. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/5/055017 · Cited by 407
Rotary Triboelectric Nanogenerator Based on a Hybridized Mechanism for Harvesting Wind Energy
Xie, Y., Wang, S., Lin, L., Jing, Q., Lin, Z.-H., Niu, S., Wu, Z., & Wang, Z. L. (2013) · ACS Nano · doi:10.1021/nn402477h · Cited by 396
Energy Harvesting from Highly Unsteady Fluid Flows using Piezoelectric Materials
Akaydin, H. D., Elvin, N., & Andreopoulos, Y. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x10366317 · Cited by 385
Rotational energy harvesting for self-powered sensing
Fu, H., Mei, X., Yurchenko, D., Zhou, S., Theodossiades, S., Nakano, K., & Yeatman, E. M. (2021) · Joule · doi:10.1016/j.joule.2021.03.006 · Cited by 337
Modeling of electric energy harvesting using piezoelectric windmill
Priya, S. (2005) · Applied Physics Letters · doi:10.1063/1.2119410 · Cited by 327
Self-citationAn improved analysis of the SSHI interface in piezoelectric energy harvesting
Shu, Y. C., Lien, I. C., & Wu, W. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/6/028 · Cited by 324
Modeling and Testing of a Novel Aeroelastic Flutter Energy Harvester
Bryant, M., & Garcia, E. (2011) · Journal of Vibration and Acoustics · doi:10.1115/1.4002788 · Cited by 322
PVDF microbelts for harvesting energy from respiration
Sun, C., Shi, J., Bayerl, D. J., & Wang, X. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02241e · Cited by 315
Efficiency of energy conversion for a piezoelectric power harvesting system
Shu, Y. C., & Lien, I. C. (2006) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/16/11/026 · Cited by 310
Metadata
- Authors
- Priya, S., Chen, C.-T., Fye, D., & Zahnd, J.
- Venue
- Japanese Journal of Applied Physics
- Publisher
- IOP Publishing
- Published
- 2004-12-24
- Volume
- 44
- Issue
- 1L
- Pages
- L104
- ISSN
- 0021-4922 (ISSN-L)
- 1347-4065
- OpenAlex
- W2076371824
- Cited by
- 240
- References
- 0
- FWCI
- 15.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.