The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Piezoelectric Properties of BaTiO3 Ceramics with High Performance Fabricated by Microwave Sintering
Abstract
Hydrothermally synthesized BaTiO 3 powders with nanoscale-sized particles were densified by microwave sintering. A sintered sample of the nanopowder fabricated by hydrothermal synthesis has a high piezoelectric constant d 33 due to fabrication by microwave sintering. The maximum value of the piezoelectric constant d 33 of a specimen fabricated by microwave sintering was approximately 350 pC/N for a small grain size of 2.1 µm. Detailed microstructures of the samples were observed by transmission electron microscopy (TEM) and scanning electron microscopy/electron backscattered diffraction analysis/orientation imaging microscopy (SEM/EBSD/OIM). The size of ferroelectric domains in the samples showing superior piezoelectric properties was less than 50 nm. SEM/EBSD/OIM observations revealed that the fraction of random boundaries was higher by approximately 10% in microwave sintered samples than in conventionally sintered ones. It is suggested that the small size of domain and the higher fraction of random boundaries might be responsible for the excellent piezoelectric properties of small grains, which can partially be attributed to domain size.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saito, Y., Takao, H., Tani, T., Nonoyama, T., Takatori, K., Homma, T., Nagaya, T., & Nakamura, M. (2004) · Nature · doi:10.1038/nature03028 · Cited by 5,475
Randall, C. A., Kim, N., Kucera, J., Cao, W., & Shrout, T. R. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02389.x · Cited by 1,063
Wada, S., Yako, K., Kakemoto, H., Tsurumi, T., & Kiguchi, T. (2005) · Journal of Applied Physics · doi:10.1063/1.1957130 · Cited by 364
Bechmann, R. (1956) · The Journal of the Acoustical Society of America · doi:10.1121/1.1908324 · Cited by 216
Takahashi, H., Numamoto, Y., Tani, J., Matsuta, K., Qiu, J., & Tsurekawa, S. (2006) · Japanese Journal of Applied Physics · doi:10.1143/jjap.45.l30 · Cited by 201
Self-citation
Cited by
BaTiO3-Based Piezoelectrics: Fundamentals, Current Status, and Perspectives
Acosta, M., Novak, N., Rojas, V., Patel, S., Vaish, R., Koruza, J., Rossetti, G. A., & Rödel, J. (2017) · Applied Physics Reviews · doi:10.1063/1.4990046 · Cited by 1,451
Recent development in lead-free perovskite piezoelectric bulk materials
Zheng, T., Wu, J., Xiao, D., & Zhu, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.06.002 · Cited by 1,078
Current Developments and Prospective of Lead-Free Piezoelectric Ceramics
Takenaka, T., Nagata, H., & Hiruma, Y. (2008) · Japanese Journal of Applied Physics · doi:10.1143/jjap.47.3787 · Cited by 422
Karaki, T., Yan, K., Miyamoto, T., & Adachi, M. (2007) · Japanese Journal of Applied Physics · doi:10.1143/jjap.46.l97 · Cited by 324
Recent Progress on BaTiO3-Based Piezoelectric Ceramics for Actuator Applications
Gao, J., Xue, D., Liu, W., Zhou, C., & Ren, X. (2017) · Actuators · doi:10.3390/act6030024 · Cited by 310
Metadata
- Authors
- Takahashi, H., Numamoto, Y., Tani, J., & Tsurekawa, S.
- Venue
- Japanese Journal of Applied Physics
- Publisher
- IOP Publishing
- Published
- 2006-09-01
- Volume
- 45
- Issue
- 9S
- Pages
- 7405
- ISSN
- 0021-4922 (ISSN-L)
- 1347-4065
- OpenAlex
- W2027827934
- Cited by
- 254
- References
- 5
- FWCI
- 9.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Piezoelectric Properties of BaTiO3 Ceramics with High Performance Fabricated by Microwave Sintering. https://app.cochat.ai/papers/10.1143/jjap.45.7405
- The paper
- Takahashi, H., Numamoto, Y., Tani, J., & Tsurekawa, S. (2006). Piezoelectric Properties of BaTiO3 Ceramics with High Performance Fabricated by Microwave Sintering. Japanese Journal of Applied Physics. https://doi.org/10.1143/jjap.45.7405
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
