Sputter Deposition of Multi-Element Nanoparticles as Electrocatalysts for Methanol Oxidation
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Fabrication of multi-element nanoparticles on noncatalyzed gas diffusion electrodes (GDEs) by radio frequency sputter deposition was reported. X-ray diffraction analysis of the as-deposited films indicated crystalline fcc phases while energy dispersive X-ray spectroscope confirmed their composition as Pt 50 Fe 11 Co 10 Ni 11 Cu 10 Ag 8 . Scanning electron microscopy images revealed nanoparticulate nodules growing on the carbon particles. Cyclic voltammetry (CV) was employed to analyze their methanol oxidation abilities for direct methanol fuel cells. The CV responses improved upon cycling and became stabilized after 70 cycles. The areas under the CV curves were proportional to the amount of nanoparticles deposited. In mass activities the GDE with 5 nm nanoparticles demonstrated the highest values of 400–600 mA/mg. In comparing with Pt and Pt 43 Ru 57 , the Pt 43 Ru 57 exhibited the lowest onset potential with the highest mass activities. Our work presents preliminary information on the catalytic behaviors of multi-element nanoparticles which is likely to bring new directions in catalyst design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Koh, S., & Strasser, P. (2007) · Journal of the American Chemical Society · doi:10.1021/ja0742784 · Cited by 783
Cited by
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
High-entropy nanoparticles: Synthesis-structure-property relationships and data-driven discovery
Yao, Y., Dong, Q., Brozena, A., Luo, J., Miao, J., Chi, M., Wang, C., Kevrekidis, I. G., Ren, Z. J., Greeley, J., et al. (2022) · Science · doi:10.1126/science.abn3103 · Cited by 1,081
High-entropy energy materials: challenges and new opportunities
Ma, Y., Ma, Y., Wang, Q., Schweidler, S., Botros, M., Fu, T., Hahn, H., Brezesinski, T., & Breitung, B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00505g · Cited by 963
High-entropy materials for catalysis: A new frontier
Sun, Y., & Dai, S. (2021) · Science Advances · doi:10.1126/sciadv.abg1600 · Cited by 942
“289 was predicted to have a ~40-mV lower overpotential relative to that of Pt (111), which is the best pure metal surface for ORR.”
BackgroundMethodInfluentialHigh-Entropy Alloys as a Platform for Catalysis: Progress, Challenges, and Opportunities
Xin, Y., Li, S., Qian, Y., Zhu, W., Yuan, H., Jiang, P., Guo, R., & Wang, L. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03617 · Cited by 840
Metadata
- Authors
- Tsai, C.-F., Wu, P.-W., Lin, P., Chao, C.-G., & Yeh, K.-Y.
- Venue
- Japanese Journal of Applied Physics
- Publisher
- IOP Publishing
- Published
- 2008-07-01
- Volume
- 47
- Issue
- 7R
- Pages
- 5755
- ISSN
- 0021-4922 (ISSN-L)
- 1347-4065
- OpenAlex
- W2004374644
- Cited by
- 66
- References
- 1
- FWCI
- 0.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.