The DOI matches its Crossref record.
Permeability and fluid flow in natural mudstones
Abstract
Mudstone permeabilities vary by ten orders of magnitude and by three orders of magnitude at a single porosity. Much of the range at a given porosity can be explained by differences in grain size; at a given effective stress, coarser-grained mudstones are more permeable than finer-grained mudstones, although the difference diminishes with increased burial. Pore size distributions illustrate why more silt-rich mudstones are more permeable than finer mudstones and also show that the loss of porosity and permeability with increasing effective stress is driven primarily by the preferential collapse of large pores. Pore size distributions can also be used to estimate permeability rapidly. None of the existing models are ideal and need to be adjusted and validated through the acquisition of a much larger permeability database of well-characterized mudstones. We also examine the role of faults and fractures as fluid conduits in mudstones. The occurrence of microscopic hydrofractures is inferred from the observation that fluid pressures in sedimentary basins rarely exceed minimum leak-off pressures. The extent to which microfractures enhance mudstone permeability, both instantaneously and over longer periods of geological time, is poorly constrained. Although fault zones in mudstones have generally low permeability, there is abundant evidence for episodic flow along faults in tectonically active regions. The role of faults as fluid conduits during periods of tectonic quiescence is less certain, and the timing and extent of any enhanced permeability and enhanced flow are not well known. In general, conditions conducive to fluid flow along muddy faults include an increase in the activity of the fault, high fluid pressures within the fault zone and the extent of overconsolidation and lithification of the mudstones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A permeability–porosity relationship for mudstones
Yang, Y., & Aplin, A. C. (2010) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2009.07.001 · Cited by 312
Self-citationGas transport and storage capacity in shale gas reservoirs – A review. Part A: Transport processes
Gensterblum, Y., Ghanizadeh, A., Cuss, R. J., Amann-Hildenbrand, A., Krooss, B. M., Clarkson, C. R., Harrington, J. F., & Zoback, M. D. (2015) · Journal of Unconventional Oil and Gas Resources · doi:10.1016/j.juogr.2015.08.001 · Cited by 265
Impact of fabric, microcracks and stress field on shale anisotropy
Dewhurst, D. N., & Siggins, A. F. (2006) · Geophysical Journal International · doi:10.1111/j.1365-246x.2006.02834.x · Cited by 264
Self-citationThe Nanoscale Basis of CO2 Trapping for Geologic Storage
Bourg, I. C., Beckingham, L. E., & DePaolo, D. J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03003 · Cited by 163
Metadata
- Authors
- Dewhurst, D. N., Yang, Y., & Aplin, A. C.
- Venue
- Geological Society, London, Special Publications
- Publisher
- Geological Society of London
- Published
- 1999-01
- Volume
- 158
- Issue
- 1
- Pages
- 23-43
- ISSN
- 0305-8719 (ISSN-L)
- 2041-4927
- OpenAlex
- W2020834108
- Cited by
- 168
- References
- 0
- FWCI
- 6.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Permeability and fluid flow in natural mudstones. https://app.cochat.ai/papers/10.1144/gsl.sp.1999.158.01.03
- The paper
- Dewhurst, D. N., Yang, Y., & Aplin, A. C. (1999). Permeability and fluid flow in natural mudstones. Geological Society, London, Special Publications. https://doi.org/10.1144/gsl.sp.1999.158.01.03
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.