The DOI matches its Crossref record.
Sizing router buffers
Abstract
All Internet routers contain buffers to hold packets during times of congestion. Today, the size of the buffers is determined by the dynamics of TCP's congestion control algorithm. In particular, the goal is to make sure that when a link is congested, it is busy 100% of the time; which is equivalent to making sure its buffer never goes empty. A widely used rule-of-thumb states that each link needs a buffer of size B = overline RTT x C , where overline RTT is the average round-trip time of a flow passing across the link, and C is the data rate of the link. For example, a 10Gb/s router linecard needs approximately 250ms x 10Gb/s = 2.5Gbits of buffers; and the amount of buffering grows linearly with the line-rate. Such large buffers are challenging for router manufacturers, who must use large, slow, off-chip DRAMs. And queueing delays can be long, have high variance, and may destabilize the congestion control algorithms. In this paper we argue that the rule-of-thumb ( B = (overline RTT x C ) is now outdated and incorrect for backbone routers. This is because of the large number of flows (TCP connections) multiplexed together on a single backbone link. Using theory, simulation and experiments on a network of real routers, we show that a link with n flows requires no more than B = (overline RTT x C ) √ n , for long-lived or short-lived TCP flows. The consequences on router design are enormous: A 2.5Gb/s link carrying 10,000 flows could reduce its buffers by 99% with negligible difference in throughput; and a 10Gb/s link carrying 50,000 flows requires only 10Mbits of buffering, which can easily be implemented using fast, on-chip SRAM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Optical Packet and Burst Switching Technologies for the Future Photonic Internet
Yoo, S. J. B. (2006) · Journal of Lightwave Technology · doi:10.1109/jlt.2006.886060 · Cited by 518
Szymanski, T. H. (2022) · IEEE Access · doi:10.1109/access.2022.3169137 · Cited by 59
Metadata
- Authors
- Appenzeller, G., Keslassy, I., & McKeown, N.
- Venue
- ACM SIGCOMM Computer Communication Review
- Published
- 2004-08-30
- Volume
- 34
- Issue
- 4
- Pages
- 281-292
- ISSN
- 0146-4833 (ISSN-L)
- OpenAlex
- W3161507710
- Cited by
- 230
- References
- 0
- FWCI
- 4.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sizing router buffers. https://app.cochat.ai/papers/10.1145/1030194.1015499
- The paper
- Appenzeller, G., Keslassy, I., & McKeown, N. (2004). Sizing router buffers. ACM SIGCOMM Computer Communication Review. https://doi.org/10.1145/1030194.1015499
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.